HotSync Palm desktop with PalmZ22

Similar Questions

• Unable to HotSync Palm Centro with Desktop

  I had problems with my Windows XP Professional operating system, with SP 2 installed, & had to reinstall.  Before that my operation of HotSync Palm Centro worked perfectly.  After the reinstallation of the operating system & the Palm HotSync software starts but stalls just after that it starts as follows:

  HotSync progress:

  Package installer makes

  Installation

  Install made Service models

  Install to card made

  HotSync Exchange made

  Agenda is

  Agenda (progress stops at this point to no.

  Address Book synchronization all natural)

  Address book

  To do list

  To do list

  Block-memo

  Block-memo

  Addit

  Media

  Note:

  In the progress of HotSync duplicate entries

  The version number of Palm OS Desktop or HotSync Manager is 7.0.2

  The version of the Palm OS software running is 6.2

  My phone is a Palm Centro AT & T.

  I have done a clean uninstall including registry keys deleting & reinstalled software Palm OS 6 times & followed all the needs of technical support for troubleshooting with nothing doesn't.  I also did a soft reset of my phone for several minutes elapse before replacing the battery.

  I'd appreciate any help you could provide in order to solve this problem.

  Thank you

  Phil

  [email protected]

  I found the solution to this problem with another Member of this forum.

  I downloaded the free program DbFixIt of Pimlico Software, Inc., www.pimlicosoftware.com, & was able to install it on my Palm Centro.  I ran the program & it removed 2 problems of the Calendar database.  After that, the HotSync operation took place without problems.

  
  

  Message relates to: Centro (AT & T)

• HotSync: Palm Desktop by ACCESS must be closed when running HotSync?

  I just got this Centro by Verizon two days ago.  I realized that Centro or Palm Desktop is updated if the Plam desktop is open or running.  If I close the Desktop and HotSync application, then the Centro and the office are updated.

  Is this a bug?  Or I have to change some set up or something?  The previous version of the Office Plam and Tungsten T obtain upated if the application is running or not.   I wish that the operation of the previous version.  Information, ideas, or comments on this would be appreciated.

  Older versions of palm desktop saved data after you he entered the office. Palm Desktop 6.2 does not have this feature, whenever you put data in palm desktop 6.2 it does not save data until you click on save and then get out of the Office of palm. This is the reason why you can not sync with palm desktop, open any data that has not been registered would theoretically not sync, so to keep him from causing any problems or missing data, it is designed to be closed when HotSync.

  If you need this functionality, you will need to go back to an older version of palm desktop.

  Message relates to: Centro (Sprint)

• How to use Outlook 2007 instead of Palm Desktop with TX

  How can I get my TX hot sync with Outlook 2007 instead of the Palm Desktop program?  There must be tons of info on this, but my search does not usable results.

  Thank you

  Andy

  You need Outlook 2007 lines.

  Click on the following link to the support page for your device on the kb.palm.com Web page.
  http://www.Palm.com/us/support/TX/

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  You will find the Outlook 2007 update on this page.

  Message relates to: Palm i705

• HotSync Zire31 with win7 64 bit, outlook 2007 6.01 Hotsync, Palm Desktop 4.1.4

  I can't sync my Zire 31 with windows 7 (64-bit). I have a USB/IR adapter and my computer recognizes the presence of the Palm (Username) device. It also works with my laptop. However, no hotsync connection is made. Reviews of Palm: "can´t start hotsync because the serial port is used by another application. What is the source of my problem? What should I do for this?

  Is there someone who can solve my problem?

  Try the procedure described in the following article.

  Click on the following link for the Web page of kb.palm.com for the article about connection problems computer Pocket that affect the process of HotSync.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=1409

• Palm Desktop 4.2 will work with Windows 7 x 86?

  I'm looking to move from XP Pro to Vista to Windows 7 x 86.

  Palm Desktop 4.2 will work with Windows 7 x 86?

  Hi P1pedream,

  You can check the link to check the system requirements for Palm Desktop with Windows 7

  http://KB.hpwebos.com/wps/portal/KB2/common/article/32991_en.html

  If you upgrade one it to Windows Vista or Windows 7 Windows XP, then refer to the following articles:

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

   

  Upgrading to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/products/upgrade

   

  The upgrade to Windows 7: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/upgrading-to-Windows-7-frequently-asked-questions

  Hope this information helps.

• Palm Desktop 6.2 on Vista Home Premium install only the media and install, no calendar or Contacts

  I installed version 6.2 Palm Desktop with "Access" and the launch bar displays only the icons of MEDIA and INSTALL. There is nothing that exists is hidden or otherwise (calendar, tasks, notes, etc.). I think remember me a work-a-round, who was offered a couple of years when I first upgraded to VISTA which has solved the problem, but it was a new motherboard and at least two system re - installed there and this old brain (70 years) cannot rememberwhat I've done. Someone at - it ideas?

  I use Windows Vista Home Premium 6.0.6001 Service Pack 1 with 2 048 MB Ram on a motherboard Gigabyte.

  Thank you

  Mike

  [email protected]

  You can also right click on the shortcut for Palm Desktop and choose 'Run as administrator' whenever that...

  WyreNut

• try to hotsync my Z72 palm pilot with palmOne desktop on my laptop Vist64-Message... .port is used by another application. lights. -What should I do?

  HotSync "Z72 palm pilot" with "PalmOne Office" using bluetooth.

  palmOne Office v 4.14 installed on my Vista64 laptop

  worked at the same time, re-installed pgm after system restore and get a message:

  "Cannot start the Hotsync operation because the port is currently in use by another application"

  Computer seems to see the palm pilot and Palmpilote sees the laptop.

  Tried to use the USB hotsync cable but cannot find the windows driver.

  Help! RR

  Hi RomanRosiek,

  I suggest to try the steps from the link to the following article and check to see if it helps:

  "Cannot start the HotSync operation because the port is in use by another application."

  I hope this helps.

• Centro HotSync with Palm V6.2.2 hangs on the AGENDA - no record of calendar on the Palm Desktop

  First of all, let me say that I hate the new version of Palm Desktop 6.2.2 and ongoing problems, I do a hotsync.  Today, I had to restart my computer I "uninstalled" an unrelated program on my computer.  When I rebooted my computer and open my Palm Desktop, all calendar data was gone.  Since my Centro has recently been hotsync d, I hung up and tried to synchronize.  The device and the desktop 'locked' in the CALENDAR function.  I found another post on the Forum where people from tech support says to 'download the trial version of Pimlico DbFixit' which I did and ran.  It indicates a problem too: DB-SNLT calendar: Both Description and Note are empty - usually a registry damaged.  REC = Date of 1508 = 11/01/09.  I also went in Palm Desktop and in the section 'Applications' found 'AGENDA' and the Nations United CHECKED.  Execution of hotsync again once allowed me to update everything EXCEPT the calendar.

  HOW CAN I SOLVE THIS PROBLEM AND GET THE TIMING BACK ON MY DESKTOP?

  I basically he fixed me after having used the trial version Dbfixit.  Your person to help chat told me to buy the product and then allow it to correct any errors in my data base.  It would have been a waste of money that the fix was easy once I knew what was wrong.

  Message relates to: Centro (Verizon)

• How can you Hotsync a T5 and one E4 with the same Palm desktop program?

  My husband and I had 2 Palm Tungsten, a T5 and an E2. How do you use the same office palm hotsync our Palms? What program would work better for both of them? Thank you!

  All available versions of Palm Desktop can be downloaded here:

  http://KB.Palm.com/SRVS/Nua/launchKB.asp?c=33529

  Please note that what you are looking for is Palm Desktop 4.1.4E.  The E stands for "extended", which is required for the fields in the database of contacts who use the T5 and E2.  If you only download the version 4.1.4 (without the E), you will lose this feature on your desktop.  I think both versions are also the same.

  You will notice that the E2 is not in the list for version 4.1.4E.  It is only because they now recommend the new version (6.2) which was designed for Vista desktop computers.  Unless you have a Vista desktop, you gain nothing by using version 6.2 and you actually lose some features.

  Message relates to: None

• Sync Palm TX with Palm Desktop on the new computer laptop

  Hello

  I use a Palm TX and have been timing it (via wifi) with Palm Desktop installed on my laptop for several years, with the help of you all.  I have a new Dell laptop, running Windows 10 and I would do the same thing on this one if possible.  I downloaded and installed Palm Desktop 6.2 for the new laptop and it asks me to synchronize my device.  So I attached the cable (thought I start with this and get the wifi part will later) and press the hotsync button.  The device will attempt to connect, but I get the message "connection could not be established... '. Check your configuration and try again. »

  Any ideas?

  Thank you

  Harry

  I think I have the ability to HotSync via a cable is a good choice.  Aceeca for Vista and W7 and W8 files should work for W10 also.

  I also have a file at the beginning of the list of Wifi HotSync.  Go through it and see if you can get it to work with your laptop.

  WyreNut

• Zire 72 s sync with Palm Desktop 6.2.2?

  Until now I used Palm Desktop version 4.1, which seems to have "disappeared" from my PC. I was HotSync with my 72 s Zire. It seems that the latest version of Palm OS downloadable Desktop (excerpt from the HP site) is version 6.2.2. Does anyone know what to download this latest version on my PC, then I'll be able to download information from my 72 s Zire and continue in the future HotSync. Or, put in other words, Version 6.2.2 work with Zire 72 s? If not, can you tell me where to download the 4.1 version of?

  Here are all versions of Palm Desktop. Officially, Zire 72 came with version 4.1.4e.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/33529_en.html

• HotSync Manager does not have the Show user profile which is in Palm Desktop - badly conducted.

  I am running Palm Desktop 4.1.4 on my laptop XP Home Edition SP3

  I found that when I hotsynced many my Palm brand programs have not been not sync.

  Looking at my Palm Desktop, I found the users 'user' and a user profile. The user has no data inside (no contact etc..) Profile has my contacts and calendar etc.

  By selecting 'custom' hotsync manager is initially a field empty user with lines listed below.

  By clicking the user field concludes that 'user' but not the user profile that displays in Palm Desktop.

  In addition, the lines show items that have been uninstalled from the E2, six months ago.

  In Palm Desktop, if I select the 'user' tab up hotsync user allows a selection of "Custom" and "File Link". Slideshows custom the same incorrect lines as the custom in Hotsync manager.

  If I select the profile of the user on the ground "Custom" and file link are whitewashed and don't allow selection.

  When I hotsync my Palm applications to my my Palm desktop user profile backs up.

  I uninstalled my office palm of the laptop and reinstalled but it keeps picking up the same bad ducts and does not pick up the user's profile.

  I went to Vista laptop that I have access to and what he was able to successfully back up but I need what he is saved on my XP laptop.

  Looks like you need to do a clean tear and a relocation of the desktop on the XP machine. Uninstall the software and remove the PalmOne under Program Files folder. Then reinstall.

  Message relates to: None

• Old Palm Vx, synchronization with Palm Desktop

  Hello everyone.

  I try an old Palm Vx synchronization with Palm Desktop. But the Hotsync does not work as expected. After press the SYNCHRONIZATION button in the cradle the process starts with databases "Restore", then with the synchronization.

  When the process is finished the Palm VX. displays a RESTART Message. After that I do this restart I can not use my Palm more. The Palm is displaying the 'settings', but I don't know why. I can not type of the any of buttons, for example the Home button and looks like the Graffiti-Pad is unresolved. I only can do, it's only a hard reset with lost all data. After that, I do a hotsync and the game begins with RESTART and displaying the "settings."

  Can someone help me with this problem? What I am doing wrong?

  Thank you very much. Jens.

  The problem is solved. I installed ReDigi. This little program displays the calibration screen after each reboot hot so I could re - calibrate the digitizer and the Palm works for me once again.

  Thank you very much. Jens.

• Palm Desktop 6.2 crashing on launch with Vista

  I've been using Desktop 6.2 with Vista for several months.  He seems to have been some bad old data on my TX as Desktop crashes when I go to view months in the calendar for August 2008 and earlier versions, but otherwise very good.

  Starting last week, the application not fully open with a box indicating "Palm Desktop by Access has stopped working" in 1/2 second open strike.  I've been able to hotsync with no problems and no change.  I deleted the app and reinstalled after the re-download of Palm.  Also, I tried to log in as an administrator without help.

  Someone at - it suggestions?  Thank you very much.

  Sounds like the calendar data is currupted. Try to go in Documents on the PC, then Palm OS Desktop folder, then your Hotsync username, you should see a datebook folder, rename it. Then try to open Palm desktop and see if it works. If it does not change the conduit for synchronization and office handheld overwrits agenda. If the problem comes back, you will need DbFixIt to clean the curruption on the TX

  Message relates to: None