Similar Questions

• Simulator Device.xml file has a tag with an attribute of memory, what are the optional values for this attribute of the os?

  In the Device.xml file, it starts with the tags of the os. Each os has a memory attribute. What are the optional values for the attribute memory?

  Can we really control the memory for the simulators?

  0x85000F03
  0x8C000F03
  0x87000F03
  0x84001503
  0x86001503
  0x04001507
  0x0F001507
  0x0C001404
  0x0D001404
  0x0E001404
  0x0D000D04
  0x16000D04
  0x05001504
  0x07001504
  

  These values refer to specific hardware configurations are simulated.  They should not be changed.

• What are the optimal values for mac and arp timeout values

  Hi guys.

  What are the best values for 'mac address-table-time of ageing' and "arp timeout" by following scenarios? :

  -single sg300-10 as hosts Layer 3 - with a maximum of 10 local switch (directly connected)

  - and a 3750 x-stack with 100 local hosts + hsrp with a battery of the same kind

  or for asa 5520 as internet gateway for 500 customers?

  I use now a time of aging mac 300 seconds and a time-out of the arp of 3600 seconds.

  Is - this okay.?

  Thank you.

  These values should be fine. I don't know why the switch is layer 3 since you have of the 3750 and the ASA5520. If you start to see overflow errors, you should consider using the layer 2 switch.

  -Tom
  Please mark replied messages useful

• What is the correct syntax for the use of a variable in an ad-hoc query?

  Hi all
  
  I'm a casual user of the DB and right now need to update the records about 1000 + so that a certain column gets a unique value.
  
  So I thought I'd use a variable for this.
  
  Then, I built this type of SQL statement for only a small subset of records:
  ----------
  variable number recNumber;
  exec: recNumber: = 1;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  I get invalid SQL statement error when you try to run above (except for the guest who asks for a value I want to omit).
  
  In any case, I also tried this one:
  ----------
  CREATE SEQUENCE seqCounter;
  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
  WHERE COL_TO_BE_UPD IN ('VAL_A', 'VAL_B');
  ----------
  
  Of it, I got the error ORA-01722: invalid number... I guess it's because seqCounter is of type number and the COL_TO_BE_UPD is of type character... (?)
  
  Then I want to ask is what is the correct way to define and use a counter variable type to add a number at the end of a string?
  
  Also another question I would ask is that are variables that are used in queries ad hoc, also called "bind variables"?
  
  Thank you muchly

  If you want to add a unique number to a column, then it would be:

  UPDATE TABLE_TO_BE_UPD
  SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
  WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
  

• What is the minimum value for the data type double?

  ... a more academic question: what is the minimum value of the data type double? I thought 'double', it is the 8-byte IEEE standard and what I remember, it's + - 1.7E + - 308.  The more different number of 0 should be 1.797E - 308.

  This is why I was a little surprised when I looked at the data output of my calculation of CVI, where I found the numbers with exponents of E-319 or E-324 as the smallest value...

  But I'm sure there's an explanation :-)

  Thank you for sharing with me,

  Wolfgang

  The largest number is indeed the order of + 1.7E + 308; There are a smaller number of - 1.7E + 308. Note that this is in fact the most negative number, which is the smallest by some reckoning. For the small beach of the Exhibitor, things get a little more complicated. 1E-308 can be represented with complete accuracy and resolution, but if you're willing to lose a few bits of precision, you can go down even further. For example:

  Double x, y, z:

  x = 1E-300;

  y = 1E7;

  z = x / y;               Give 1.000000000000000E - 307

  y = 1E8;

  z = x / y;               Give 9.999999999999999E - 309

  y = 1E18;

  z = x / y;               Give 9.999987484955998E - 319

  y = 1E23;

  z = x / y;               Give 9.881312916824931E - 324

  So, as you can see, values less than 1E-308 are possible, but they become increasingly more inaccurate and should not be relied upon.

  JR

• margins for the printer so the words are not cut on the right side. What are the correct numbers for size printing letter?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• What is the correct URL for the commercial intent tool?

  I'm in the middle to make a transfer online. I need to know the tool the URL of Microsoft online commercial intention.

  I like: adlab.microsoft.com/Online-Commercial-Intention/default.aspx

  I tried Microsoft and a google search...

  This tool still exist? And if so, where? What is the correct URL?

  Thanks for your help!

  This is the site for

  http://ADLAB.Microsoft.com/audience-intelligence.aspx

  But when I click on the online commercial intent tool, the page is not found.
  http://ADLAB.Microsoft.com/online-commercial-intention/

  I would like to use the contact information on this page to see if the tool will be available:
  http://ADLAB.Microsoft.com/contact-us.aspx

  Contact information
  • Microsoft Bing Ads Labs
  • 1 Microsoft way, Redmond, WA, 98052-6399
  • Phone: 425.882.8080
  • Fax: 425.936.7329
  • E-mail: * e-mail address is removed from the privacy *.
  • Website: http://adlab.microsoft.com

    Sincerely,

    Marilyn

• What is the correct notation for complex variables

  I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly

  It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag

  (< FileExists('#request.site.imgupload#\max_#MultiPowUploadFileName_0#') cfif >
  < cffile action = "Rename".
  source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
  destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
  < cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / >
  < / cfif >

  < cfset thisFiletoMove1 = #request.currentimgid #_max.jpg / > is what gives an error construct CFML invalid encountered, ColdFusion was looking at the following:

  _max.jpg

  Then I try

  < cfset thisFiletoMove1 = #request.currentimgid & "_max.jpg" / > and I get
  

  The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid

  So now I wonder, what is the correct way to do this?

  Bianca

  bianca_homedev wrote:

  I need to handle files after download. They are all uploaded in 1 directory by a flash component and then I need to rename them, and move to the directory that corresponds to the choice of categories and subcategories. Now I'm having trouble finding how to get my variables correctly

  It's the thisFiletoMove1 variable, it must match the destination file in the cffile tag

  
   
  source="#request.site.imgupload#\max_#MultiPowUploadFileName_0#".
  destination="#request.site.imgupload#\#request.currentimgid#_max.jpg" >
     
  

  is what gives a construction of CFML not valid error found, ColdFusion was looking at the following:

  _max.jpg

  Then I try

  and I get

  The C:\websites\beta.antiek.net\demo\galleries\test\thisFiletoMove1 source specified in the cffile tag is not valid

  So now I wonder, what is the correct way to do this?

  All are both wrong:

  
  

  You were near. What you meant was probably

  However, are even better
  
  

• What is the correct format for a single. File ALX for pre and Post 5.0?

  Hello

  We have an application which works fine on the pre 5.0 BlackBerry OS.  We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices.  We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices.  It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed.  Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x.  Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now.  It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.

  So, I try to understand what the appropriate method for the use of a single file ALX is in this case.  From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.

  I did try to use the name of the series, for example , and even that would not work.  I also tried with 9500 | 9530 | 9550 and always had an error in the Application Loader saying there is no compatible software.  At first I thought it was due to some sections of with _blackberryVersion and then some with the series.  But I tried a new ALX file with just the designation of series and still no luck.

  Has anyone found how to do this properly yet?  Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series?

  Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file.  So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation.

  If I need to display the ALX file please let me know.

  Kind regards

  David Dewaele, Jr.

  The correct series attribute for 9500 is "Thunder".

  You can find that where she attributes to all here-(for normal installations)

  C:\Program Files\Common Motion\AppLoader\Device.xml search

• How to display all - what is the generic value for a numeric field?

  I have a products table and a table of product assimilated into my database category.

  In the products table, each product has a numerical value in its product category field (int), which relates to the rowID (int) for the category in the product category table.

  I created a search form that allows you to select a category in the categories list in the categories table product and my set of records in the page of results is set to filter by category ID but I want users to categories "show all" but when I pass an empty value or a value of '%' in the nothing recordset is returned or if an error occurs.

  Here is a basic example of my form:

  < name of the form = "searchform" action = "resultspage.asp" method = "post" > "

  < select name = "categoryID" id = "categoryID" >

  < option value = "" > view all the < / option >

  < option value = "1" > lights < / option >

  < option value = "2" > paint < / option >

  < / select >

  < / make >

  .. .and a basic example of my recordset on my results page:

  < %

  Dim rsPROP__MMColParam

  rsPROP__MMColParam = '1 '.

  If (Request.Form ("categoryID") <>"") then

  rsPROP__MMColParam = Request.Form ("categoryID")

  End If

  % >

  < %

  Dim rsPROP

  Dim rsPROP_cmd

  Dim rsPROP_numRows

  Set rsPROP_cmd = Server.CreateObject ("ADODB.Command")

  rsPROP_cmd. ActiveConnection = MM_cs_STRING

  rsPROP_cmd.CommandText = "SELECT prodid, product, categoryID FROM dbo.products WHERE categoryID =?"

  rsPROP_cmd. Prepared = true

  rsPROP_cmd. Parameters.Append rsPROP_cmd. CreateParameter ("param1", 5, 1, -1, rsPROP__MMColParam) ' adDouble

  Set rsPROP = rsPROP_cmd. Run

  rsPROP_numRows = 0

  % >

  I know it's probably something stupid, but I'd appreciate any help I can get as I keep going round in circles with this one!

  Thank you in advance.

  Concerning
  NJ

  Thanks booth.

  Strangest thing... I just tried a Google search for a solution to this problem and came across another thread on this forum.  At the moment I am inside of him, I realized one of those involved came from me years!  Bab, already known it or what!

  Changed my recordset for...

  <>

  Dim rsPROP__MMColParam

  rsPROP__MMColParam = '0 '.

  If (Request.Form ("categoryID") <> "") then

  rsPROP__MMColParam = Request.Form ("categoryID")

  End If

  %>

  <>

  Dim rsPROP__MMColParam1

  rsPROP__MMColParam1 = '1 '.

  If (Request.Form ("categoryID") <> "") then

  rsPROP__MMColParam1 = Request.Form ("categoryID")

  End If

  %>

  <>

  RsPROP Sun

  rsPROP_cmd Sun

  rsPROP_numRows Sun

  Set rsPROP_cmd = Server.CreateObject ("ADODB.Command")

  rsPROP_cmd. ActiveConnection = MM_cs_STRING

  rsPROP_cmd.CommandText = "SELECT prodid, product, categoryID FROM dbo.products WHERE ISNULL(?,0)" = 0 OR categoryID =? ".

  rsPROP_cmd. Prepared = true

  rsPROP_cmd. Parameters.Append rsPROP_cmd. CreateParameter ("param1", 5, 1, -1, rsPROP__MMColParam) ' adDouble

  rsPROP_cmd. Parameters.Append rsPROP_cmd. CreateParameter ("param2", 5, 1, -1, rsPROP__MMColParam) ' adDouble

  Set rsPROP = rsPROP_cmd. Run

  rsPROP_numRows = 0

  %>

  .. .and it works very well.

  Appreciate the help. I followed your advice and did an If Else on the WHERE clause to achieve the same.

  Thank you.
  NJ

• What are the possible values for APP_COMPONENT_TYPE?

  The possible values of APP_COMPONENT_TYPE documented anywhere?

  Also, I want to ask all the components in my APEX application. My current query of multiple views unions APEX (apex_application_page_items, apex_application_page_buttons, apex_application_page_regions,...)-a point of view by each component type. Is there a better way to list components?

  Thank you

  -Kris

  Select * from APEX_APPLICATION_ALL_AUTH

  View:	APEX_APPLICATION_ALL_AUTH
  Description:	All the authorisation schemes for all components of the Application

  Column Name Comments WORKSPACE Model authorization workspace WORKSPACE_DISPLAY_NAME Full name of the workspace APPLICATION_ID Number of request of authorization Scheme APPLICATION_NAME Name of the schema to request authorization PAGE_ID ID of Page authorization regime COMPONENT_TYPE APEX authorization schema component type NAME OF THE COMPONENT Name of the component system APEX authorization AUTHORIZATION_SCHEME Name of schema authorization STATUS Situation of authorisation system

  See http://eberapp.com/pls/apex/f?p=447:1301:35096966318357:CLEAR_SORT:RP, 1301:P1301_VIEW:APEX_APPLICATION_ALL_AUTH

• What is the correct process for the construction of webworks + apps cordova with ripple?

  Hello, I'm developing an application targeting os6 and 7 devices using phonegap and tests through the emulator to ripple. The emulator seems to be missing the package for blackberry in cordova apache mode option. Switching mode webworks brings up the option. However, the deviceready event that cordova expects is not raised in this mode. Therefore, do not start apps according to the deviceready event.

  Is there something that I am missing?

  WebWorks and Cordova are two separate web platforms.

  WebWorks mode, you will be able to imitate WebWorks APIs belay the WebWorks SDK to your content of HTML5 (sign) package in a BlackBerry application.

  In Cordova mode, you will be able to emulate the Cordova APIs (including the deviceready), however there is no integration with the Cordova SDK for real packaging process. You will need to follow the documentation of Cordova for packaging and signing.
  http://Cordova.Apache.org/docs/en/3.1.0/guide_platforms_index.MD.html#platform%20Guides

• What is the correct version for version OA Framework 11.5.10.7RUP

  Hello
  Can you please suggest me which is the correct version of jdeveloper, I used version.
  
  OA Framework 11.5.10.7RUP
  Oracle Applications Extension 9.0.3.8.13 - build 1570
  Business 9.0.3.9 components
  UIX (Cabo) 2_2_24_5
  BiBeans Runtime 3.1.0.82 no Debug BI beans 3.1.0.x
  MDS 9.0.5.4.89_562
  XML Oracle XDK Java 9.0.4.0.0 Production
  Object Applications AOL/J, Java Core Library roll up Patch J
  Servlet 2.2
  Java 1.5.0_20
  Driver JDBC 9.2.0.8.0
  Database Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  SunOS 5.10 operating system
  Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0)
  
  Kind regards
  Adhi

  Hello

  Download patch Patch 8751878.

  Kind regards
  GYAN

• What is the correct syntax for it?

  Hey guys

  If...

  trace (rowsHolder.getChildByName("MC"+newStr).y);

  .. .correctly outputs it coordinate with (in this case) mc001, how out the coordinate y of a clip called item_base_mc that is located in the timeline of mc001?

  trace (rowsHolder.getChildByName("MC"+newStr).item_base_mc.y);

  .. .save me an error display object.

  I tried the permutations of the above with the brackets in various places, but have not cracked the code.

  What would be the right way to write?

  Thanks for taking a peek.

  Shaun

  trace (MovieClip (rowsHolder.getChildByName("mc"+"001")).item_base_mc.y);

  hope this will help you!