What is the default user name and password of the dynamically created edge NSX gateway?

Similar Questions

• Default user name and password on Stor.e Tv

  Hey,.

  I just bought a 2 TB stor.e TV set and switched all my files on it, I am trying to access the network and it asks me a username and password but I never put a!

  Do anyone knows the default user name and password OR do you know how I can create a?
  Also has there NEVER been an update of firmware for this thing?
  Best thing I can say, is that there has not been since 2010.

  Any help is greatly appreciated!

  Bravo guys,.
  John.

  To my knowledge the TV StorE is not secured with any passowords.
  I think you should try to Stor.E TV to factory default value.
  To do this, you must go to configuration-> General Setup-> default.
  But if it fails, and the store TV is not able to start, then this may be a malfunction of the equipment.

• Default user name and password after destructive recovery

  I have just completed a full destructive recovery on my laptop, Windows Vista asks me a username and password but my old profiles were deleted, any ideas if there is a default name and password should I use?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Show only the default user name and password

  Hi all
  
  I want to just display the default usernames and passwords. Can I do this?
  
  Thank you!
  Dan.

  Try this,

  SQL> SELECT USERNAME,PASSWORD,CREATED FROM DBA_USERS WHERE CREATED <=( SELECT CREATED from v$database);
  

  Note:-some of us who have done more than a CREATE CONTROLFILE and observe what is happening know that V$ DATABASE. CREATION is not 'Date of the creation of the database'.
  It's actually "date of creation of the * controlfile."

  Source:-http://hemantoracledba.blogspot.com/2010/07/vdatabasecreated-is-this-database.html

• Cannot find the user name and password

  I tried to download firefox, but when I open the page he asks me a username and password. I tried everything, but insofar as cannot access the internet.

  ID it by default user name and password, or am, I sent one, if this is not how to solve this problem?

  Download Firefox from this page:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• Photosmart HP 5510 invites to indicate the user name and password

  Hi people,

  I put a static IP address for the Photosmart HP 5510. When I navigate to , I get a pop-up dialog box requesting a user name and password.
  
  Does anyone know how to reset it on the Photosmart HP 5510?

  Thank you very much

  concerning

  Hey Joe,

  Try the following steps below.

  1. press the button on the control panel wireless

  2. tap on settings

  3. scroll down to the network by default, then press Ok

  You should be able to access the security settings in the built-in Web server now. Let me know what you find?

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• XDB user name and password required in the Apex 4.0.1

  Hello
  
  I installed the Apex 4.0.1 on Oracle 11 g R 2 windows 2003 R2.
  
  I installed the apex 4.0.1 using the method of the Embendded PL/SQL gateway.
  
  After installation, when I run in url = http://localhost: 8080, pls, apex, apex_admin it up a small window requiring XDB user name and password.
  
  
  I don't understand what to do to solve this problem.
  
  
  
  I installed the apex by following the steps.
  
  Help, please.
  
  
  Thank you
  
  
  
  -Apex installation steps-
  
  @apexins SYSAUX SYSAUX TEMP is
  @apxchpwd
  @apex_epg_config.sql c:\apex_4.0.1
  ALTER USER ANONYMOUS ACCOUNT UNLOCK;
  EXEC DBMS_XDB. SETHTTPPORT (8080);
  
  
  DECLARE
  ACL_PATH VARCHAR2 (4000);
  ACL_ID RAW (16);
  BEGIN
  -Did the ACL currently assigned to ' *' and give APEX_040000
  -the privilege 'connect' if APEX_040000 does not yet have the privilege.
  
  SELECT ACLS IN ACL_PATH OF DBA_NETWORK_ACLS
  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
  
  -Before checking the privilege, to ensure that the ACL is valid
  -(for example, does not contain obsolete references to users ignored).
  -If so, we'll spend the following exception:
  --
  -ORA-44416: invalid ACL: 'APEX_040000' main outstanding
  -ORA-06512: at "XDB". DBMS_XDBZ', line...
  --
  SELECT SYS_OP_R2O (extractValue (P.RES, ' / resources/XMLRef ')) IN ACL_ID
  OF XDB. XDB$ ACL A, PATH_VIEW P
  WHERE extractValue (P.RES, ' / resources/XMLRef "") = REF (A) AND
  EQUALS_PATH (P.RES, ACL_PATH) = 1;
  
  DBMS_XDBZ. ValidateACL (ACL_ID);
  IF DBMS_NETWORK_ACL_ADMIN. CHECK_PRIVILEGE (ACL_PATH, 'APEX_040000',
  'connect') IS ZERO THEN
  DBMS_NETWORK_ACL_ADMIN. ADD_PRIVILEGE (ACL_PATH,
  "APEX_040000", TRUE, "connect");
  END IF;
  
  EXCEPTION
  -When no ACL has been attributed to ' *'.
  WHEN NO_DATA_FOUND THEN
  DBMS_NETWORK_ACL_ADMIN. CREATE_ACL ('power_users.xml',
  "ACL that allows users to be able to connect everywhere."
  "APEX_040000", TRUE, "connect");
  DBMS_NETWORK_ACL_ADMIN. ASSIGN_ACL('power_users.) XML ',' *');
  END;
  /
  
  commit;
  
  
  
  SELECT par_value FROM ctxsys.ctx_parameters WHERE par_name = 'FILE_ACCESS_ROLE ';
  
  
  
  CREATE THE APEX_URL_DATASTORE_ROLE ROLE.
  
  
  GRANT APEX_URL_DATASTORE_ROLE to APEX_040000;
  
  EXEC ctxsys.ctx_adm.set_parameter ('file_access_role', 'APEX_URL_DATASTORE_ROLE');
  
  
  ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 1000;
  
  ALTER SYSTEM SET SHARED_SERVERS = 5 SCOPE = BOTH;

  Hi John,.

  you're right - it should be the other way around: usually (and, if following the installation guide) configuration for OHS DAD uses the path alias + / pls / apex + as for the EPG, it's just + / apex + by default.

  -Udo

• delete the user name and password to DOWNLOAD?

  When I open Firefox, the first thing that appears is my username and password asked.
  I just want to go to Firefox without using a user name and password.
  Thank you.

  How Firefox request your login? Since you have a Microsoft Messaging site selected as your home page, I expect Firefox to display https://login.live.com/login.srf at startup (assuming you disconnected from Outlook when you completed before, or any cookie value preserve your connected status has expired or has been removed). What do you see?

  In this case, if you do not want to immediately connect you to this site, you can:

  • Skip the page and go wherever you want
  • Change your home page (see: How to set the home page)

  If you get another type of command prompt, what it looks like?

• I'm trying to restore the Vista system on a Dell computer. It restores to the point where I have to put in the user name and password, but it does not type in the username areas. Help. Thank you

  I use the recovery disks, restore the Visat OS on a dell laptop.  After the OS system, it displays the screen that requires the user name and password.  I can change the image associated with the user name, I can move the box around the screen, but it won't let me type in the username and password box.  Without putting the usernane and the password it will not go further, and I can not restore.  Help, please.  Thank you.

  Hello

  This is the Information from Dell to reinstall using disks:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For any problem using it, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or post in the Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Not receive a computer given to nine, but don't know the user name and password

  I got a refurbished computer and I don't know the user name and password. Someone knows what to do?

  * original title - I received a refurbished computer and I don't know the user name and password. Someone knows what to do? *

  Hello

  Reinstall vista

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Hello

  I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Please give the solution

  What happens when you try to connect?

  If you are able to connect using the different account, try running gpupdate/force.

  If the problem persists, you can open the discussion on:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  What is responsible technical issues forum.

• deleted user account and the screen is the user name and password

  Hello

  Thank you very much for the help in advance.

  My personal PC at home never used me to ask for a password when I start it up, I can't put in when I took it out of the box, if I did, then I forgot. now, I went and I deleted the user account (admin) on W7 (the only one I had)... went to RUN > typed in "control userpasswords2" > highlighted account > remove... the PC did not ask if I want to keep the files or not, he just asked me to reboot now or later. I rebooted.

  THE PROBLEM IS: after I restarted the PC, it now wants to put me the user name and password, I do not know if she wants my old username and password or what? (Forgot my password)

  Will be commissioning a PC on the mode using safe without a boot disk (not yet tried) and what happens if the hidden admin account is what I deleted, then where?

  Please help because I tried to put my old username that I used until I deleted the account... what username and password he wants and what can I do to use my PC again.

  What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?

  When you start in safe mode, how many accounts user do you have? If more than one, you can create a new user account?

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-GB/Windows-Vista/fix-a-corrupted-user-profile