Default user name and password after destructive recovery

Similar Questions

• Default user name and password on Stor.e Tv

  Hey,.

  I just bought a 2 TB stor.e TV set and switched all my files on it, I am trying to access the network and it asks me a username and password but I never put a!

  Do anyone knows the default user name and password OR do you know how I can create a?
  Also has there NEVER been an update of firmware for this thing?
  Best thing I can say, is that there has not been since 2010.

  Any help is greatly appreciated!

  Bravo guys,.
  John.

  To my knowledge the TV StorE is not secured with any passowords.
  I think you should try to Stor.E TV to factory default value.
  To do this, you must go to configuration-> General Setup-> default.
  But if it fails, and the store TV is not able to start, then this may be a malfunction of the equipment.

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• [MAF] How to get the user name and password after login?

  Hi Experts,

  I have a call to REST where it requires identification information of the user (uname and password) to identify the data that belongs to who.

  Authentication has been made with OAuth.

  I believe that there is an API to get the user name and password in the CRG

  See you soon,.

  Hendry

  Hello.

  You don't need to manipulate the credentials yourself in code. MAF will propagate the logon cookie or inject the identification information in the HTTP header if cookies are not supported.

  To do this, you must select the purchase option of cookie from the server connection Include in REST in the dialog box create a connection Login MAF , such as discussed here:

  http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-securing.htm#ADFMF23732

  In addition, you must attach the policy of security appropriate to the connection, as explained here:

  http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-Web-services.htm#ADFMF23697

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Skype account is always available with the old user name and password after you bind Microsoft account

  https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop-with-my-micro...

  After my new account Microsoft a link to my original Skype account, I'm still able to sign into account newly merged with the old Skype account username and password. Of course, I am also able to connect to the account merged with the Microsoft Mail and as well password account.

  My question is this, is this a planned security measure? As far as I know, support faq suggested using the Microsoft account to connect to the newly merged account. The support page is in the link given.

  I thought that once the merger of Skype accounts both Microsoft, the only method to sign the merged account is using the Microsoft account only. Please enlighten me on this matter. Thank you.

  This works as expected. When you link a Microsoft account with Skype account name, you should be able to connect to Skype, either by using Skype or Microsoft account name. Two connection options will lead to the same account.

• Show only the default user name and password

  Hi all
  
  I want to just display the default usernames and passwords. Can I do this?
  
  Thank you!
  Dan.

  Try this,

  SQL> SELECT USERNAME,PASSWORD,CREATED FROM DBA_USERS WHERE CREATED <=( SELECT CREATED from v$database);
  

  Note:-some of us who have done more than a CREATE CONTROLFILE and observe what is happening know that V$ DATABASE. CREATION is not 'Date of the creation of the database'.
  It's actually "date of creation of the * controlfile."

  Source:-http://hemantoracledba.blogspot.com/2010/07/vdatabasecreated-is-this-database.html

• Cannot find the user name and password

  I tried to download firefox, but when I open the page he asks me a username and password. I tried everything, but insofar as cannot access the internet.

  ID it by default user name and password, or am, I sent one, if this is not how to solve this problem?

  Download Firefox from this page:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• System user name and password recovery options

  Hi, looking for help to find my user name and password recovery system, I'm trying to factory reset my laptop, any information will be greatly appreciated, thanks siiinky

  Generally, you don't need to insert any user name or password when you start the recovery process...
  Usually, you must press ENTER to continue.

• I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Hello

  I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Please give the solution

  What happens when you try to connect?

  If you are able to connect using the different account, try running gpupdate/force.

  If the problem persists, you can open the discussion on:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  What is responsible technical issues forum.

• I'm trying to restore the Vista system on a Dell computer. It restores to the point where I have to put in the user name and password, but it does not type in the username areas. Help. Thank you

  I use the recovery disks, restore the Visat OS on a dell laptop.  After the OS system, it displays the screen that requires the user name and password.  I can change the image associated with the user name, I can move the box around the screen, but it won't let me type in the username and password box.  Without putting the usernane and the password it will not go further, and I can not restore.  Help, please.  Thank you.

  Hello

  This is the Information from Dell to reinstall using disks:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For any problem using it, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or post in the Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Request user name and password when you try to load Windows 7

  We try to load Windows 7 on our office - he was moving along and then stopped to ask username and password - we have never set a user name and password on our machine and can't go back or forward, the machine is blocked.  What do we do?

  After you have created a username, you should be asked to create a password and confirm it.

  Just for clarication, you are in what we call the page Out of Box Experience, here are the simple steps to complete:

  Choose your country or region, time and currency and keyboard and click Next.

  1 type the name you want to use for the user name that is created locally on the client and click Next.

  2 across your account, a password page, type a password (twice) and an indication of password and click Next.

  3. on the Type of your Windows product keys page, enter your product key. If you do not fill this field, you will have 30 days to provide the product key. (I leave the product key white on test machines). The automatically activate Windows when I'm online checkbox is selected by default. If you choose not to enter your product key, clear this check box and click Next.

  4. the Please read the license terms page requires that you select the I have the license terms box, and then click Next.

  5 to protect your computer and improve Windows automatically page, there are three choices: use recommended settings (download and install all OS patches, drivers from Windows Update and Windows Defender updates, IE filter phishing and other updates when they are available), install important updates only (downloads and installs updates only) and ask me later (updated Automatic turning off the power). Choose the setting that suits you and click Next.

  6 set your time zone, the date and time on the review your page, settings of date and time and then click Next.

  7. the current position of your computer setting determines how secure your new customer. If you are on a home network of trust (which has a firewall between the client and the internet), choose home network. If the client is on a network of trust at work (once again, when there is a current firewall) choose work network. If you are in a coffee shop or any other public place with no known between the client and the Internet firewall, choose the network audience.
   
  8. you will see prepare your computer, then the Windows 7 desktop.
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• XDB user name and password required in the Apex 4.0.1

  Hello
  
  I installed the Apex 4.0.1 on Oracle 11 g R 2 windows 2003 R2.
  
  I installed the apex 4.0.1 using the method of the Embendded PL/SQL gateway.
  
  After installation, when I run in url = http://localhost: 8080, pls, apex, apex_admin it up a small window requiring XDB user name and password.
  
  
  I don't understand what to do to solve this problem.
  
  
  
  I installed the apex by following the steps.
  
  Help, please.
  
  
  Thank you
  
  
  
  -Apex installation steps-
  
  @apexins SYSAUX SYSAUX TEMP is
  @apxchpwd
  @apex_epg_config.sql c:\apex_4.0.1
  ALTER USER ANONYMOUS ACCOUNT UNLOCK;
  EXEC DBMS_XDB. SETHTTPPORT (8080);
  
  
  DECLARE
  ACL_PATH VARCHAR2 (4000);
  ACL_ID RAW (16);
  BEGIN
  -Did the ACL currently assigned to ' *' and give APEX_040000
  -the privilege 'connect' if APEX_040000 does not yet have the privilege.
  
  SELECT ACLS IN ACL_PATH OF DBA_NETWORK_ACLS
  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
  
  -Before checking the privilege, to ensure that the ACL is valid
  -(for example, does not contain obsolete references to users ignored).
  -If so, we'll spend the following exception:
  --
  -ORA-44416: invalid ACL: 'APEX_040000' main outstanding
  -ORA-06512: at "XDB". DBMS_XDBZ', line...
  --
  SELECT SYS_OP_R2O (extractValue (P.RES, ' / resources/XMLRef ')) IN ACL_ID
  OF XDB. XDB$ ACL A, PATH_VIEW P
  WHERE extractValue (P.RES, ' / resources/XMLRef "") = REF (A) AND
  EQUALS_PATH (P.RES, ACL_PATH) = 1;
  
  DBMS_XDBZ. ValidateACL (ACL_ID);
  IF DBMS_NETWORK_ACL_ADMIN. CHECK_PRIVILEGE (ACL_PATH, 'APEX_040000',
  'connect') IS ZERO THEN
  DBMS_NETWORK_ACL_ADMIN. ADD_PRIVILEGE (ACL_PATH,
  "APEX_040000", TRUE, "connect");
  END IF;
  
  EXCEPTION
  -When no ACL has been attributed to ' *'.
  WHEN NO_DATA_FOUND THEN
  DBMS_NETWORK_ACL_ADMIN. CREATE_ACL ('power_users.xml',
  "ACL that allows users to be able to connect everywhere."
  "APEX_040000", TRUE, "connect");
  DBMS_NETWORK_ACL_ADMIN. ASSIGN_ACL('power_users.) XML ',' *');
  END;
  /
  
  commit;
  
  
  
  SELECT par_value FROM ctxsys.ctx_parameters WHERE par_name = 'FILE_ACCESS_ROLE ';
  
  
  
  CREATE THE APEX_URL_DATASTORE_ROLE ROLE.
  
  
  GRANT APEX_URL_DATASTORE_ROLE to APEX_040000;
  
  EXEC ctxsys.ctx_adm.set_parameter ('file_access_role', 'APEX_URL_DATASTORE_ROLE');
  
  
  ALTER SYSTEM SET JOB_QUEUE_PROCESSES = 1000;
  
  ALTER SYSTEM SET SHARED_SERVERS = 5 SCOPE = BOTH;

  Hi John,.

  you're right - it should be the other way around: usually (and, if following the installation guide) configuration for OHS DAD uses the path alias + / pls / apex + as for the EPG, it's just + / apex + by default.

  -Udo