Default user name and password on Stor.e Tv

Similar Questions

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• Default user name and password after destructive recovery

  I have just completed a full destructive recovery on my laptop, Windows Vista asks me a username and password but my old profiles were deleted, any ideas if there is a default name and password should I use?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Show only the default user name and password

  Hi all
  
  I want to just display the default usernames and passwords. Can I do this?
  
  Thank you!
  Dan.

  Try this,

  SQL> SELECT USERNAME,PASSWORD,CREATED FROM DBA_USERS WHERE CREATED <=( SELECT CREATED from v$database);
  

  Note:-some of us who have done more than a CREATE CONTROLFILE and observe what is happening know that V$ DATABASE. CREATION is not 'Date of the creation of the database'.
  It's actually "date of creation of the * controlfile."

  Source:-http://hemantoracledba.blogspot.com/2010/07/vdatabasecreated-is-this-database.html

• Cannot find the user name and password

  I tried to download firefox, but when I open the page he asks me a username and password. I tried everything, but insofar as cannot access the internet.

  ID it by default user name and password, or am, I sent one, if this is not how to solve this problem?

  Download Firefox from this page:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• Photosmart HP 5510 invites to indicate the user name and password

  Hi people,

  I put a static IP address for the Photosmart HP 5510. When I navigate to , I get a pop-up dialog box requesting a user name and password.
  
  Does anyone know how to reset it on the Photosmart HP 5510?

  Thank you very much

  concerning

  Hey Joe,

  Try the following steps below.

  1. press the button on the control panel wireless

  2. tap on settings

  3. scroll down to the network by default, then press Ok

  You should be able to access the security settings in the built-in Web server now. Let me know what you find?

• Windows mail, user name and password

  I forgot the username and password for windows mail, when I send the CV to jobs the pop-up window asking to connect to the POP Gmail com username and password as my default email w / windows, how can I recover or change the user name and password, thx.

  Hi Mark4561,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  Method 1:

  Try to add or remove the account in Windows Mail and check.

   

  Add or remove a Windows Mail account

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Method 2: Disable the anti-virus software if installed some and check.

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See also:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Hope this information helps. Please reply back with the State so that we can help you.

• I'm trying to restore the Vista system on a Dell computer. It restores to the point where I have to put in the user name and password, but it does not type in the username areas. Help. Thank you

  I use the recovery disks, restore the Visat OS on a dell laptop.  After the OS system, it displays the screen that requires the user name and password.  I can change the image associated with the user name, I can move the box around the screen, but it won't let me type in the username and password box.  Without putting the usernane and the password it will not go further, and I can not restore.  Help, please.  Thank you.

  Hello

  This is the Information from Dell to reinstall using disks:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  For any problem using it, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or post in the Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• 'The specified network folder is currently mapped using a different user name and password'.

  "The specified network folder is currently mapped using a.
  another user name and password.
  Connect using a different user name and password
  First, disconnect any existing mappings to this network
  share '.
  I got this message when trying to access a laptop on my home network. It's a laptop which came for years. The only change that occurred was the removal of a few videos to Windows Media Player. In fact, I was sitting near the laptop (laptop 1) that stores the video & audio files that I share on my network for years and an additional (cell 2) laptop computer on my network. I was simply remove a playlist via WMP and I witnessed portable 2 lose access to files I had shared for years with my home network. I don't even use WMP, I had just open trying to access the laptop 1 video/audio files to my PS3 system. I was clear an old list of video of WMP so I could add the extra avi files to the list that I had collected over the years. I wanted to not double many videos so I removed the videos in WMP list. Since then, I'm not able to share anything of my laptop 1 to the rest of my network. I did not like WMP before, now I really despise WMP. When I try to share a folder, right click, share with & click on homegroup (read/write), the option is not selected. Any solution would be greatly appreciated. Thank you

  Hello

  The link below talking about a similar problem that should help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/the-network-folder-specified-is-currently-mapped/928f6313-fe2c-4d2D-A247-152ec022e062

• Request user name and password when you try to load Windows 7

  We try to load Windows 7 on our office - he was moving along and then stopped to ask username and password - we have never set a user name and password on our machine and can't go back or forward, the machine is blocked.  What do we do?

  After you have created a username, you should be asked to create a password and confirm it.

  Just for clarication, you are in what we call the page Out of Box Experience, here are the simple steps to complete:

  Choose your country or region, time and currency and keyboard and click Next.

  1 type the name you want to use for the user name that is created locally on the client and click Next.

  2 across your account, a password page, type a password (twice) and an indication of password and click Next.

  3. on the Type of your Windows product keys page, enter your product key. If you do not fill this field, you will have 30 days to provide the product key. (I leave the product key white on test machines). The automatically activate Windows when I'm online checkbox is selected by default. If you choose not to enter your product key, clear this check box and click Next.

  4. the Please read the license terms page requires that you select the I have the license terms box, and then click Next.

  5 to protect your computer and improve Windows automatically page, there are three choices: use recommended settings (download and install all OS patches, drivers from Windows Update and Windows Defender updates, IE filter phishing and other updates when they are available), install important updates only (downloads and installs updates only) and ask me later (updated Automatic turning off the power). Choose the setting that suits you and click Next.

  6 set your time zone, the date and time on the review your page, settings of date and time and then click Next.

  7. the current position of your computer setting determines how secure your new customer. If you are on a home network of trust (which has a firewall between the client and the internet), choose home network. If the client is on a network of trust at work (once again, when there is a current firewall) choose work network. If you are in a coffee shop or any other public place with no known between the client and the Internet firewall, choose the network audience.
   
  8. you will see prepare your computer, then the Windows 7 desktop.
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Why my firewall only use the domain user name and password for login and enable passwords, not a different password enable as do it my switches? RADIUS config looks the same...

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Question:

  Firewalls Cisco requires that one level of password, i.e. the domain user name and password are used for logging as that to reach the global configuration mode.

  Background:

  We have several network devices Cisco, put in place who authenticate to our Windows using NPS (Windows 2008 R2) DC. Switches we have implemented the function exactly as we would wish that they need your domain user name and password to connect to the device. Then they require a separate password when you use the enable command, it is stored in Active Directory:

  Switches:

  User name:domain-username

  Password:password-field

  SWITCH >Activate

  Password:Enable-password - to-Active Directory

  SWITCH #.

  Firewalls (as they are now):

  User name:domain-username

  Password:password-field

  Firewall >enable

  Password:password-field

  FIREWALL #.

  With the firewall, however, they require your domain user name and password first and then your domain password again when you use the enable command. I want to reuse the firewall to use the level that currently switches enable password rather than the password of domain. The appearance of the current configuration as follows:

  Current configuration of the switch:

  AAA new-model

  AAA authentication login default local radius group

  AAA authentication enable default group enable RADIUS

  AAA authorization exec default local radius group

  AAA - the id of the joint session

  ACCT-port of 1645 auth-port host 192.168.0.1 Server RADIUS 1646

  Server RADIUS ports source-1645-1646

  RADIUS server key 7 1234abcd

  Current configuration of the firewall:

  RADIUS protocol AAA-server DC01

  AAA-server DC01 (outside) host 192.168.0.1

  authentication AAA ssh console LOCAL DC01

  Console to enable AAA authentication LOCAL DC01

  1234abcd keys

  Any help would be great, thanks!

  You must use GANYMEDE + instead of RADIUS for this.

  Here, you can use command sets in the results section of the policy.

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,