What is the difference between ip direct-broadcast

Similar Questions

• Hi, I can not find the cuda switch in my PowerMac dual g4 in the opposite direction, what is the difference between reset pram by touch or cuda?

  Hello

  I can't find the switch cuda in my PowerMac g4 dual mirrored, 1.00

  What is the difference between reset pram by touch or cuda?

  Switching on the open Mac I can see a small red light and I listen to the classic sound

  but nothing on the monitor.

  FireWire connection with my mac Mini, I can view and save the hd PowerMac

  The battery was completed in December 2012 (it's weird, cause I bought the double

  years before and never changed)

  Thanks for your attention and sorry for my English...

  First of all, I have to warn. G4 MDD don't have a CUDA button and old Macs - it has a PMU reset button. The difference is that, for a computer with the PMU system like yours, you give the key ONLY a short thrust, not longer than a second.

  If treat you it as if it was a CUDA button and hold for 20 seconds, you will seriously damage your computer. That said, this image shows the location of the PMU reset in a G4 MDD:

  

  What is the difference between reset pram by keyboard or cuda?

  Since your G4 has no CUDA reset ability, this becomes a moot point. In the old Mac (G3 Beige and more - the "Old world ROM" Macs) reset PRAM via the keyboard is not completely zero everything; the CUDA reset did.

• What is the difference between NB200, NB205?

  Hello, I'm in the UK! I am wanting to know what is the difference between NB200 and NB205? Thank you

  I am in the United States, but generally for Toshiba, which ends with '0' are ordered directly from Toshiba and those ending in "5" are sold at retail...

  The f

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• Acer H236HL 23 "monitors - what is the difference between UNIFIED Messaging. VH6AA.003 et.004

  Acer H236HL 23 "monitors - what is the difference between the SKU:886541901255 / regulation. Manufacturer: UM. VH6AA.003 and SKU:887899490491 / MFR. manufacturer UM. VH6AA. OO4?
  Thanking you in advance.
  Gary Simpkins / [under the direction of privacy]

  Hello

  1. UM. VH6AA.003 -H236HL offers:
     Cables: 1xVGA Cable - power cable - cable 1xDVI - 1 x HDMI cable
  2. UM. VH6AA.004 -H236L
     Cables: 1xHDMI Cable - cable 1xVGA - power cord

• What is the difference between Unicast RPF and Reverse Path Forwarding?

  I am confused between Unicast RPF and Reverse Path Forwarding function.

  What is the difference between Unicast RPF and Reverse Path Forwarding?

  Because they have all two please check the address of the source of each package before sending it to the destination too?

  Reverse Path Forwarding is used only when the network want to build a tree shared multicast communication and then we must use Unicast RPF after creation of the shared tree?

  The mechanism of the RPF is mainly used to ensure no loop of routing traffic.

  As you probably already read, it does by ensuring that his route to the source address of a packet received is accessible via the same interface that the packet is entered in the. Think of the notion of "root port" in STP. all root ports are similar to the root, sunflower follow the Sun. Therefore, it is naturally a loop prevention mechanism.

  With multicast traffic, it is quite likely to create multiple loops of routing the nature of 'destination' traffic. For this reason, using a mechanism as the RPF to ensure you are on the "road to the root" (to say) to the source originating multicast traffic. Otherwise if you're not then you either receive this traffic route in a loop, or a suboptimal path.

  uRPF works essentially the same way, except that it is done for unicast traffic instead. Now with unicast traffic your flow is from a source and directs to a single destination. Given that, as the fact that you are using a dynamic routing algorithm (which allows to select the path to a destination), you can have loops of your network for unicast traffic flow routing; of course there may be exceptions to pitfalls of configuration route redistribution.

  However RPF when it is applied to traffic unicast can add another advantage, and it's verification IP source. That's why we can use it as a security mechanism to ensure that data are from where it is supposed to come.

  On the limit of the L2, you then have mechanisms such as guard source IP to ensure that the correct host is not usurpation of their IP address.

  By analogy RPF can be used for checking at source for multicast traffic, and it is intrinsically that however, the most important role is so that it can be used to guarantee without loop routing of multicast traffic.

  I hope that helped clear things upwards and not confused you any more with all this.

• What is the difference between OCÉ and (OCP and OCS)

  What is the difference between ECAS and (OCP or OCS).

  For example, I heard that OCS helps with the language

  and the marketing of a product.

  Could this be true as ECAS focuses on how to do things.

  and not so much things to a much higher level.

  For example, how do you set up, how you use it, how do you start, etc.

  Thank you Roger

  Roger,

  OCÉ Doghouse more. These certifications can be more CERT of intermediate or high level certificates. These were specifically developed for the gaps in the certification that did not match our OCA, OCP, hierarchy of the CMO.

  Generally, the CERT of the OCS tend to focus more on implementation. These certificates have been developed for the Oracle PartnerNetwork for areas of certification which specifically serve Oracle partners and qualify them for levels of specialization. These certifications are available for all candidates, but are directed towards members of OPN.

  I hope this helps.

  Kind regards
  Brandye Barrington

  Oracle Certification program

• What is the difference between the Test send, batch send and send quickly in e-mail?

  Hello

  What is the difference between the Test send, batch send and send quickly in e-mail?

  Thank you

  Rahul Bhambri

  Hi Rahul

  Shipping of lots: the option to send batch to create a campaign and send an email directly from the email editor.

  Fast-track dispatch: does not give rise to statement and when you send in a test by sending e-mail quick option its look like live image.

  Test send: sending e-mails to test that this function allows you to send a test email and validate the email to make sure that there is no problem with him before his deployment.

  Thank you

  edynamic expert Eloqua

• Is someone can you please tell me what the "ESD" means to Acrobat Pro Win ESD XI? What is the difference between 'Acrobat Pro XI' and "Acrobat XI Pro Win ESD"?

  Is someone can you please tell me what the "ESD" means to Acrobat Pro Win ESD XI? What is the difference between 'Acrobat Pro XI' and "Acrobat XI Pro Win ESD"?

  Hi pattiparrish,

  ESD stands for electronic Software Distribution. Acrobat XI provided compact disc of thought which included installation CD, on the other hand it was also provided by ESD, which included the direct download for Acrobat link XI products download Adobe Acrobat | Standard, Pro | DC, XI, X.

  There is no difference in the application, the difference, it's just that how it is provided to the customer.

  Kind regards
  Nicos

• What is the difference between the payment organization method and mode of payment transfer?

  What is the difference between the payment organization method and mode of payment transfer?

  As I am a new bie, I'm curious as to what it may seem a silly question.

  Thank you

  Jean

  Hi John,.

  Just to add to the comments of Avinash-

  You create methods of payment organization - say in cash, cheque, Direct deposit.

  You assign to a payroll (on the screen of definition of payroll)

  Now for assignments with this payroll, you can set payment methods Org (only those you have assigned to the level of payroll)

  The assignments may have one or more payment methods, with different percentages adding up to 100%.

  Hope that helps,

  See you soon,.

  Vignesh

• What is the difference between creative Cloud ENT 'SN EDFUL V15' and 'SN EDFUL N15'?

  What is the difference between creative Cloud ENT 'SN EDFUL V15' and 'SN EDFUL N15'?

  Moving to this discussion on the Adobe Creative Cloud forum.

  ESI valladolid, please contact our support team directly to contact customer service for more details on the plans available to your organization creative cloud.

• What is the difference between associative arrays and nested tables?

  Hello
  What is the difference between associative arrays and nested tables?
  
  nested tables cannot be indexed by other than pls_integer and unlike nested tables table associative cananot be declared at the schema level.
  
  is there any other difference set apart from the diff above 2?

  user13710379 wrote:
  What is the difference between associative arrays and nested tables?

  Name-value pairs (associative) against a list of values (table standard/nested table).

  nested tables cannot be indexed by other than pls_integer

  They are not "indexed" the way in which an associative array is indexed. A standard table is referenced by the position of the cell in the table. This position is essentially the offset of the memory of the cell from the start address of the table.

  Can not solve a cell in an associative array directly via a memory offset index. You place a cell reference value it by his 'name' (a search in the linked list/hash table).

  The following example shows the difference between the pairs of name / value and a list of core values.

  SQL> declare
    2          --// associative arrays are NAME-VALUE pairs
    3          type TArr1 is table of varchar2(10) index by pls_integer;
    4          type TArr2 is table of varchar2(10) index by varchar2(10);
    5
    6          arr1    TArr1;
    7          arr2    TArr2;
    8  begin
    9          arr1(100) := '1st entry';
   10          arr1(1) := '2nd entry';
   11          arr1(5) := '3rd entry';
   12
   13          arr2('john') := 'New York';
   14          arr2('jane') := 'Paris';
   15          arr2('jack') := 'London';
   16
   17  end;
   18  /
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL>
  SQL> declare
    2          --// standard arrays are lists
    3          type TArr3 is table of varchar2(10);
    4          type TArr4 is table of number;
    5
    6          arr3    TArr3;
    7          arr4    TArr4;
    8  begin
    9          arr3 := new TArr3( '1st entry', '2nd entry', '3rd entry' );
   10
   11          arr4 := new TArr4( 100, 1, 5 );
   12  end;
   13  /
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

• What is the difference between SLR vs digital SLT?

  What are the differences between LOVE & DSLRS?
  Thank you

  Single lens translucent (SLT) cameras have a fixed translucent mirror inside the camera body. Without moving, the translucent mirror directs light to both the image sensor and the sensor for the auto focus of the camera Phase detection at the same time. Because the mirror does not move, it makes the camera maintain a constant focus on your subject and select burst mode high speed, such as video recording.

  Camera Digital Single Lens Reflex (DSLR), on the other hand, have a mirror that allows to invert vertically inside the camera body. With the mirror flipped down, light travels from the source to the optical viewfinder. With the mirror flipped down, light travels to the camera's image sensor.

  Instead of an optical viewfinder, SLT cameras use an electronic viewfinder.

  If my post answered your question, please mark it as "accept as a Solution.

• What is the difference between the following methods to display the...?

  What is the difference between the following methods to display the plan to explain it?
  PLAN of EXPLAIN for SQL statements
  package dbms.xplan
  
  Thank you

  You are mistaken in thinking that they are alternatives.

  EXPLAIN the PLAN meets the PLAN_TABLE.
  Only after that can you use either of
  SELECT... FROM PLAN_TABLE
  or
  SELECT * FROM TABLE (DBMS_XPLAN. DISPLAY);

  Unless you are using DBMS_XPLAN. DISPLAY_CURSOR directly on a present cursor in the shared pool, the PLAN to EXPLAIN is still a sine qua non for DBMS_XPLAN. DISPLAY.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• What is the difference between a Apple Watch Series II and the Nike Apple Watch?

  I am interested in buying an Apple Watch, but I don't really understand what are the difference between the two.

  Hello

  Information about the models of series 2 Apple Watch (including Apple Watch Nike +) are available here:

  https://www.Apple.com/watch/