What is the difference in coverage and coverage before holes?
Hi all
Anyone know what is the difference in coverage and coverage before holes?
I can find the doc of Cisco is:
«cover holes are displayed as alarms, coverage before holes are displayed as events»
"The gaps or the 'holes' in coverage of radio access point are the main cause of poor audio. Detected on the client before hole events coverage provides continuous monitoring to ensure that the customer is informed about the existence of these cover holes. »
It seems to cover before the hole is detected customer, cover hole is detected AP? However, I'm not sure.
Another question is what trap includes alarm coverage before hole in the dictionary of alarm and event of WCS 7.0? I can only find several cover traps:
LRADIF_COVERAGE_PROFILE_FAILED
LRADIF_COVERAGE_PROFILE_PASSED
However, two of them have no say if for hole cover or the front cover. Don't know what trap will be sent by the WCS to a notification receiver configured to indicate an event coverage before hole, for example:
Minor - X - 13: 27:52 16/09/10 cisco-WCS WCS SNMP <$2>0x07 da 09 10 0d 1 b 2 c b 05 2-0 at 00: 10.1.1.12: coverage before hole reported by 00:1f:3 c: cd:c8:2 detected by 10.1.1.12: coverage before hole reported by ' 00:1f:3 c: cd:c8:2 has ' found on the controller
Your valuable contribution is very much appreciated!
Hello!
A front cover is when a client remains for 5 seconds in a coverage hole. In other words, when a customer is heard for a while to wrong signal and is not roaming, it must mean that this area is a coverage hole. This event is informational
A coverage hole event is when several clients are pasted into the same hole in coverage. Then the AP will increase its power if possible.
WLC waits for several clients before trigger power avoids crazy behaviors of increasine/reduction/increase/decrease.
The settings for cover hole events can be configured on the part of MRR of WLC (number of customers, etc...)
Nothing is configurable for cover before hole because it's just '1 customer only reached the hole in coverage thresholds '.
Hope that clarifies.
Nicolas
$2>
Tags: Cisco Wireless
Similar Questions
-
What is the difference between extensions and Plugins and Add-ons?
I'm sorry if here is not the right place for this post.
What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.
Kind regards
DaneshHi Danesh,
You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.
Hope this helps!
-
What is the difference between Firefox and Namoroka 64-bit?
I have a 64-bit computer. Which should I use?The officially supported only is Firefox - which is your best choice, unless you want to test the new features...
-
What is the difference between dawn and the beta?
What is the difference between dawn and the beta?
Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.
-
I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.
AWR estimated AXIEM most powerful plan EM Simulator around. AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws. Here is a summary of the differences:
Mesh
- EMSight must mesh the nearest grid drivers using rectangles. This causes the mesh to have more elements mesh when there are small and large geometries. The grid should be small enough to capture the small geometry but then causes large geometries to mesh more. In addition, angled or curved structures causes inefficiencies mesh.
- AXIEM STS forms, rather than a grid. In addition, the mesh can be rectangle or triangle. This allows a much more efficient mesh. AXIEM generally have a much more efficient
- AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh. EMSight does not have this feature.
- AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)
Ports
- The ports are for the most part similar, but parasites due on AXIEM ports are less. In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
- Ports can be added to most any place in geometry with AXIEM. For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.
Problem solvers
- EMSight does not have a low frequency Solver. Stop low-frequency and then extrapolate to DC. This usually works well, but you must take into account if the extrapolation is accurate. AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
- Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment. It has a special algorithm to break the question of memory, but the question of time is the killer. AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn). In other words, AXIEM can solve a lot of bigger problems than EMSight.
- Several AXIEM processes are multithreaded as EMSight.
Speaker
- EMSight is inside a perfect driver side wall. This works well if you the circuit is in the same cavity. If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes. AXIEM is not here. AXIEM does not currently have to simulate a perfect driver side wall.
I don't know that I missed a few aspects of the tools. From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.
-
What is the difference between tear and Brüning cd
What is the difference between tear and Brüning a cd.
Hi SirNickLong,
Here are a few links to explain the difference:
http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD
http://Windows.Microsoft.com/en-us/Windows-Vista/demo-burn-a-CD-or-DVD
hope this helps,
Eddie B. -
What is the difference between nc6320 and nx6320 laptops?
What is the difference between nc6320 and nx6320 laptops?
Can I use the same drivers for each of them?
Hello:
There is not much difference.
If you want to compare all the details you can check this link:
http://h18000.www1.HP.com/products/QuickSpecs/12428_div/12428_div.PDF
You can probably use the same drivers for either, but they all have both their own support pages and separate driver.
nc6320:
NX 6320:
Paul
-
What is the difference between containers and hyper-v server windows?
Hello
What is the difference between containers and hyper-v server windows?
Thank you
PS: Where's your homework due?
-
What is the difference between upgrade and custom installation options?
* Original title: windows 7
What is the difference between upgrade and custom installation options?
Hello
How to do a clean install:
http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html
Sometimes the only way to upgrade is to do a clean install,
" Upgrade Windows XP to Windows 7 "
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7#T1=tab01
To upgrade your Windows XP computer to Windows 7, you will need to select custom during installation of Windows 7. A custom installation keeps your programs, files or settings. It is sometimes called a 'clean' for this reason installation.
"Upgrading from Windows Vista to Windows 7"
http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7#T1=tab01
You then have the repair facility, which is an In = Place Upgrade.
"How to do a repair installation to repair Windows 7"
http://www.SevenForums.com/tutorials/3413-repair-install.html
See you soon.
-
What is the difference between RP1 and RP2 in ASR1006
Hi can anyone tell what is the difference between RP1 and RP2 in ASR1006? Thank you
Read all about here: Cisco ASR 1000 processors data sheet series road
-
6921 ip phones. What is the difference between 'Standard' and 'Slimline '.
Hello
I am looking to buy some new 6921 charcoal IP phones and I am confronted with 2 options:
CP-6921-C-K9 = Cisco Unified IP Phone 6921, combined with coal, Standard
CP-6921-CL-K9 = Cisco Unified IP Phone 6921, charcoal, combined Slimline
What is the difference between standard and slimline. Maybe it's simple but English is not native for me and found no difference anywhere.
Thank you
Mario
Fix. Some people think that these are more modern, or they like just better.
-
What is the difference between ipv4 and ipv6?
original title: Internet connectivity
What is the difference between ipv4 and ipv6 connectivity connectivity and which one should I use?
IPv4 - https://en.wikipedia.org/wiki/IPv4
IPv6 - https://en.wikipedia.org/wiki/IPv6
IPv6 deployment - https://en.wikipedia.org/wiki/IPv6_deployment
-
What are the differences between RT and Win 8 Pro?
RTWhat are the differences between RT and Win 8 Pro?
Windows 8 - this runs on processors traditional x 86 - x 64 for Intel and AMD, and the same apps that runs on Windows 7, Vista, and Windows XP.
Windows RT - built on the same basis as Windows 8, it works on a different processor called ARM and not running programs in Windows 7, Vista, or Windows XP. In addition, it comes with Microsoft Office 2013 while Windows 8 does not work. It only comes on the new devices, in contrast to Windows 8 you can buy a license for an existing computer.
-
What is the difference between Mutipoint and Multiway video calls?
What is the difference between Mutipoint and Multiway video calls?
They are both multi-point calls, however, Multiway is a feature that you can activate with the correct infrastructure and MCU in place, which will allow the ends without a telepresence MCU Office and integrated JabberVideo customers of degenerate transparently a point-to-point call in a multipoint call on the relevant MCU.
See the relevant Multiway Deployment Guide corresponding to the version of software that you run on your VCS - C for more information; http://www.Cisco.com/c/en/us/support/unified-communications/Telepresence-video-communication-server-VCs/products-installation-and-configuration-guides-list.html
/Jens
Please note the answers and score the questions as "answered" as appropriate.
-
What is the difference between OCÉ and (OCP and OCS)
What is the difference between ECAS and (OCP or OCS).
For example, I heard that OCS helps with the language
and the marketing of a product.
Could this be true as ECAS focuses on how to do things.
and not so much things to a much higher level.
For example, how do you set up, how you use it, how do you start, etc.
Thank you Roger
Roger,
OCÉ Doghouse more. These certifications can be more CERT of intermediate or high level certificates. These were specifically developed for the gaps in the certification that did not match our OCA, OCP, hierarchy of the CMO.
Generally, the CERT of the OCS tend to focus more on implementation. These certificates have been developed for the Oracle PartnerNetwork for areas of certification which specifically serve Oracle partners and qualify them for levels of specialization. These certifications are available for all candidates, but are directed towards members of OPN.
I hope this helps.
Kind regards
Brandye BarringtonOracle Certification program
Maybe you are looking for
-
Receiver fake spam on Thunderbird myself.
Turned on my computer at work and I get an avalanche of spam from my own email every minute Thunderbird checks for new emails. Each message is titled "MyFax message 'unknown' from - 3 page (s)" with at: [email protected]. It doesn't make sense as to w
-
Satellite Pro U200 - speakers not working not
Help, please. My u200 speakers do not work and neither will be taken for the speaker in the front. Check all volume levels and they seem ok.Checked the drivers and they say they work but still have no sound! What do I need do have execution of ideas.
-
HP2000-2b10NR: hard drive imaging Options
Hello I was able to repair the bad sectors of a hard drive that I thought was not. I suspect that this is always a failure, so would like to as quickly as possible to keep the information about this and to migrate to a new disk image. Someone at - it
-
I received this error - 0 x 80070570 on my Windows 7 x 86 computer. It stops at 70%
-
Just got U460 (i5), plug a cable HDMI to HDTV, nothing comes out. Do I need any configuration or is a default unit.