What is the Kingdom of multi site profile

Similar Questions

• What is the model of this site?

  http://www.tamarindrestaurant.com/

  What is the model of this site called and can it be done in muse?

  Looks just like a standard (unsigned) Jquery site... you could do something like that in the same page with Dreamweaver or Muse.

  I think it's a crap me that loads very slowly and does not require half as being undesirable site but this isn't really the point.

• What is the standard width of site Web

  What is the standard width of site Web

  I created a site on my site created 1903 px is wide and when I have the consultation on the browser width is ok

  but when I look at a link created site on another computer, then I have to scroll to the right or the left

  If you go to file > new in Muse, you'll see the width of the default site Office is 960.  One of my friends who is a web designer has recently helped me get up and running in Muse, so I could build my own site - I'm a photographer, not a web person.  It states 1200 px as the width of my new site, and that works very well.  This is the version of office.  Versions of the Tablet and phone are narrower, of course.

  Googling your question, it seems that there is no "standard" here.

  John

• What is the setting point in v2 profile us Web Coated Swop of gain?

  Hey guys,.

  This may seem a bit of a n00b question, but I really can't find that info all what I Googled it.

  What is the point of setting default in v2 profile us Web Coated SWOP of gain?

  Let me explain my dilemma:

  My printer told me to use the US Web Coated SWOP v2 this profile for a catalog that we will print. 4/4 on gloss 100 # book stock. However, I have used this profile in the past and the prints came out darker as I expected. I don't have a printer of high enough quality to be able to test this in-house, but I am sure that my monitor is too bright or set a contrast too high level. They told me that their standard mast is approximately 10-15%

  I assumed the SWOP v2 profile 20% fattening as seems to be the default for most of the other color settings, but I've never known with certainty. I am trying to decide if I need to use a custom profile with a highest point gain setting.

  Thanks for any help!

  Kenzier

  Hello Kenzier,

  the U.S. Web Coated SWOP ICC profile contains a reproduction of the tones (CRT) curve

  which can only be described accurately by Dot Gain or Gamma.

  For entry into the color settings > Gray we can proceed as follows:

  Color settings > Gray > grey load > (click on) USWebCoatedSWOP.icc > save gray

  This saves a 'black-ink-profile' with a similar name, which replaces the Dot Gain

  or Gamma settings.

  This profile can be interpreted by the ICC profile Inspector (free) program:

  Here we have kTRC (shades of black ink reproduction curve), the red line.

  With the diagonal black auxiliary, it reads 20% efficient fattening,

  the blue line.

  

  The printer should tell you a representative profile (a good approximation)

  for its actual process.

  Cordially - Gernot Hoffmann

• Extend the L2 VLAN multi-site WAN

  Hello

  I have several sites connected over a MPLS network provider, everything works as expected, have full connectivity L3 in all these sites.

  I now need to establish layer 2 connectivity (VLAN) on the 21 sites. Ideally, I would intend to attach additional routers behind routers of THIS (don't have no access to these suppliers or PEs, but provider may re - configure BGP on the CE peer with our device) and use a port on these routers as port Lan Layer 2, but do not know which technology to use

  1. L2TPv3 comes to mind, but can L2TPv3 works in a multipoint configuration? Can I have a site as a hub and others like rays and talk through the hub? Traditional using L2TPV3 config, how do I use multiple Xconnects for the same VLAN on the same interface?
  2. Worse, I can run on (also our new routers VPLS PEs) MPLS VPLS, but seems like overkill.

  What you guys say is the most simple/more elegant solution for this puzzle?

  L2TPv3 does not support multitouch.  It can perform point to point.

  VPLS does support multitouch, but you need much more expensive kit to do.

  I have just a brainwave!  You only use the IP protocol for this network of layer 2?  If so, use LISP.  It works on the same lower end kit of Cisco.  I would like to convert your entire network to him.

  In particular, you must activate the LISP mobility.

  General information of LISP:

  http://Lisp.Cisco.com/

  An example of an extension of the continuous complex layer 2 using LISP with full redundancy.  You don't want something this complex, but it shows what you want to do, and the massive power that LISP has.

  http://www.Cisco.com/c/en/us/TD/docs/solutions/Enterprise/Data_Center/DCI/5-0/LISPmobility/DCI_LISP_Host_Mobility/LISPmobile_4.html

• What is the origin of flash sites do not have to work?

  After upgrade to 8.0 FF I can no longer view YouTube or flash Web sites. I have the latest updates of Adobe for all the programs they offer. I have all my updated modules to date.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Commissioning for lack of Exchange because of the latency in Multi Site domain controllers

  Hi all

  I use using the OIM 11 g R2 PS2 BP04 with AD-connector version (11.1.1.6.0 & AD 2010) and the Version of the Exchange Connector (11.1.1.6.0 & Exchange 2010) and its installed on RHEL 6.5. We have 20:00 domain controllers and each of them is in a different site. Here is the list of domain controllers:

  DC-host1,DC-HOST2,DC-site2-host1,DC-SITE3-host1,DC-SITE4-host1...etc

  We use automatic configuration AD access strategies and resources the user Exchange and configured as domain controllers in AD IT resource:

  DC-HOST1 - primary

  DC-HOST2 - secondary

  AD resource provisioning works fine however when IOM tries to configure exchange to the user, its failure due to the latency issue b & w AD different Site of the domain controller. For example, "PRODTESTUSER12" is implemented successfully in AD and when IOM tries to configure exchange for this user, exchange server search for any available domain controller search for the user. It randomly selects an AD domain controller, I say DC-SITE2-HOST1 to search for the user. Since this domain contorller is on another site and it is latency, its not able to find the user of this domain controller, this is why available exchange fails for this user. See the below error:

  Target class = oracle.iam.connectors.icfcommon.prov.ICProvisioningManager

  < 21 may 2015 23:10:06 CEST > < error > < ORACLE. IAM. CONNECTORS. ICFCOMMON. Prov. ICPROVISIONINGMANAGER > < BEA-000000 > < oracle.iam.connectors.icfcommon.prov.ICProvisioningManager: createObject: error while creating user

  java.lang.RuntimeException: the operation could not be performed because the object 'PRODTESTUSER12' could not be found on 'anc-dc2k8 - 01.wssc.ad.root'.

  We have not specified this domain either under AD controller or Exchange resources.

  n Connector logs, I can see below: 22/05/2015-10:55:19 < INFORMATION >: class-> Org.IdentityConnectors.Exchange.RemoteRunspaceInstance-> InvokeScript method, Message-> enter the method

  
  22/05/2015-10:55:19 < VERBOSE >: class-> Org.IdentityConnectors.Exchange.RemoteRunspaceInstance,-> InvokeScript method, Message-> Script: Set-ADServerSettings - ViewEntireForest: $true; Get-User "PRODTESTUSER21" - ReadFromDomainController

  I think, because of this script, Exchange Server recovers first of any domain controller available to search for the user. Yes, is there a way to restrict or put domain controller's favorite?

  

  There is a hotfix available for this problem. Here are the details:

  Patch 19692488: APPLICATION of MERGER on top of 11.1.1.6.0 FOR the BUGS 18310438 19478076

  Bugs resolved by this fix

  UPDATED EXCHANGE CONNECTOR SMTP PRIMARY ADDRESS 16813315 PROBLEM

  17949931 DELAY IN EXCHANGE / COMMISSIONING

  19478076 WITH REGARD TO THE EXCHANGE OF SUPPLY FAILURES.

  Concerning

  Suren

• How does the option of multi site

  I realize that Muse is not true "adapted" and you need to create a version for each platform, so how this work?

  Lets say I created a desktop, Tablet, and the mobile version of my site. How to publish the project so that all three versions are active and how he treats people visiting the site on these platforms. Typo www.acme.com via mobile phone, for example, will take me to the correct version or is at - it a transmission, a code injection should be done to take the visitor to the correct site or are the three versions actually three completely separate versions?

  Hi Christian,

  Versions for desktop, phone and Tablet for a single site will be in the same file of muse. So, if the site will be accessible on any device, it will be automatically identified and appropriate version will be displayed.

  Is attached a screenshot of the plan view to add the phone and tablet on the site.

  

  Kind regards

  Neha

• If known, what are the main components, or variables that make unnecessary Netflix streaming when Silverlight is to work on other Web sites?

  I uninstalled it, reinstalled, reset all default values, bought new equipment, contacted Netflix, Microsoft, sampled through Silverlight video other sites sampled through my laptop and pc turn to my roommate, but to enjoy.

  What are the other options to get Silverlight to work on my Tower, despite the fact that the application works well on it and for a long time before the current state?

  Hello

  Check in the SilverLight Forums:

  SilverLight - Forums
  http://forums.Silverlight.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What is the disadvantage of savings WITHOUT color profile for the web?

  I have discussed this issue in another thread and a clear argument against saving jpg files * without * a color profile must be performed.

  I'm very annoyed with how much more red and saturated, all my jpg files appear in IE (which does not read the sRGB embedded profile) compared to FF (which is the case).

  I tried to save the image even with the inclusion of unchecked color profile, and of course, IE and FF are showing the same image.

  It seems to me that including color profiles with jpg are just an invitation for different browsers interpret the image differently.

  Why not just save them all, WITHOUT color profiles?

  The downside to this, what exactly?

  mjyeager wrote:

  Emil, please do not confuse what follows for stubbornness...

  No worries, I never had such thoughts

  mjyeager wrote:

  ... IE does not read color profiles. The fact of FF. ERGO, in situations where a color profile is involved, the JPG will be different in each browser.

  True, without color managed programs and management the colors may not display an image in the same way. Except in the situation where the color profile describing the color of the image or the color values of an image without a color profile, by an extraordinary chance match the display capabilities of color of the device used by the program managed without colors.

  One of the problems that the addresses of color management is that all monitors will display the same color differently. Color management will make colors appear the same or as close as possible.

  A color managed program will send the RGB values of the color of the video card corrected to compensate for the differences between how your monitor displays color values and how they are perceived.

  For example, to help my Monitor wide gamut, when I create an image in Photoshop, with a red color pure R = 255, G = 0 and B = 0 and then do a screen capture, I can check how Photoshop sends these values to the video card. The result is R = 222, G = 65, B = 0 when I'm simulating an ideal sRGB display. So I can see how my colors appear on the screens of ideal sRGB. However, in reality, it is very likely to have a monitor displaying space sRGB color ideal without a color management, so to complete the color management chain, the other monitors that display my image must also have the appropriate color management to compensate for the differences in screen and display correctly RGB numbers representing the color that I see on my screen.

  mjyeager wrote:

  ... However, if the JPG has no color profile, image shows exactly the same way in both browsers...

  Who will most likely be a bad smell, which means not repoducing the expected color which is always the case with the browsers managed without colors.

  mjyeager wrote:

  ... Now, let's say this image - which looks the same in both browsers - is too hot. I can load it in Photoshop, change its hue and re-save is more what I'm looking for. The resulting image will then out - in the two browsers identically - the way I want to...

  Yes, the image will be the same in both browsers on your and any other monitor but the colors that you create (edit) will examine the way which only see you them on your monitor.

  mjyeager wrote:

  ... Now, what I think you are trying to do, is that I have no control on what are the conditions of viewing on the OTHER end (i.e., visitors to the site). They could range wide monitors, cheaper monitors, running MAC or PC, etc...

  I don't remember talking about this earlier, but yes, it's true.

  mjyeager wrote:

  ... It's true. I have no control over that. However, how including the color profile sRGB with the JPG would give me more control over these things I would not include? Unless you had to tell me that browsers arbitrarily apply a random color profile when in the absence of one, I am simply not understand how including the color with the JPG profile performs one another act that ensure that the picture is completely different in FF it does in Internet Explorer.

  You who are absolutely wrong. Color management is not to have any control over how other devices are setup, calibrated, etc.. As I said earlier make sure you communicate the colors scheduled correctly or as close as possible, as long as you and the destination use the proper color management. This means that the embedded profile FF will display correctly the planned colors while IE will not. If you do not include a color profile with your image both FF and IE will not display correctly the planned colors but they will be equal in that.

  mjyeager wrote:

  ... I understand the need for color profiles to print. In fact, my printer insists on the details when it comes to color profiles.

  But for the web? I'm still not understand where the downside is to omit the color profile. It's not like the browsers get CONFUSED when it is not included. Or that the colors will start randomly from refreshing one page to another.

  I am really trying to understand what you are saying here, but still haven't.

  In addition to what Marian said:

  If you create the colors using an sRGB display ideal (given the color management on your system works properly, it can be simulated by color of Photoshop on your range management widescreen when you assign the profile sRGB color to the image) and then on any ideal sRGB display, it will look the same you see on your screen regardless if it's with or without embedded sRGB color profile. However, in reality, it is unlikely to have a monitor, sRGB, display of the ideal space of sRGB color without color management. Now what does this mean in practice? Assume that users interested in, using the IE managed without colors on a PC with the Windows default color management. In other words, color management programs are told by the system monitor displays the ideal sRGB space, which is very likely to be the truth. Then users with this configuration with sRGB monitors will not see a difference between IE and FF when viewing your image with or without sRGB profile, the colors are not very likely to be the same that you see on the screen, but with the difference that is more likely to be accepted depending on how close to the ideal color space sRGB these monitors are. If some of these users with this configuration have wide range monitors, then the image will always be the same with or without sRGB profile, but with a very unacceptable difference of how you see it on your space to sRGB sumulated - strongly supersaturated.

  For users that have the color correctly managed systems, when the image is saved with a sRGB profile, it appears color managed programs such as FF the same or as close as possible to the way in which you can see on your monitor. Programs run without colors the case remains the same as that described above.

  A little history on how standard sRGB was created. It is a standard, including more things, but above all defining an abstract color space. It was created sometime after that the market was already flooded with computer monitors, and the creation of ideal sRGB color space was based on an average PC monitor display capabilities over time. After that the manufacturers used this standard sRGB as a target to create monitors.

  UN-color of programs run on PC have been created and tested using sRGB monitors so that they can't be considered reliable for showing intended to display colors if the images they use have been created using an sRGB they will be in the stadium of this range of sRGB.

• What is the best practice to remove the IMAPMail folder Thunderbird profiles files?

  I removed some old IMAP accounts via the account settings > account to delete. But I see that the IMAP folders (Inbox, drafts, sent, .msf, .sbd, etc.) for accounts are always in Library/Thunderbird/Profiles/*.default/ImapMail. What is the proper way to delete these old files from account?

  Simply delete them.

• I thought WWDC 2016 TEU June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  I thought WWDC 2016 was just June 13 at 10 am PDT. Some sites say that the event is from 13 to 17 June. What is the date on which they will announce if there are new products coming out. What is 13?

  WWDC is the 13th week, not a single day. However, at 10:00 13 will be the speech. It's what you want to watch. You can download the application to your computer via: Developer Apple WWDC Watch - WWDC -. You can download the app for iPhone, iPad, or contact via the iTunes Store.

• The multi site bookmark

  Is it possible to insert a bookmark of the multi site? For example, a click opens 8 sites/tabs. If so, how is this installer?

  To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java

  {Ctrl + click} works like the Middle-click.

• I can't click on the icons at the top of a site. What is the cause?

  I have firefox and is having a strange problem today. When I'm on facebook, I can't click on the icons at the top. I do not click on the message, friend notifications, location, profile icons and do not click on the one that allows to disconnect. So I can't log out yet. I mean do not click on it is when I put the cursor over these icons, it does not change in the finger. When I left click it in any case, nothing happens. This does not occur in internet explorer, but I want to continue to use firefox. What is the cause? I also noticed that this happens not just on facebook. I uninstalled and reinstalled firefox. I restarted the PC. It did not help.

  The extension of the Yahoo! toolbar reported that causes this problem.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Yahoo mail and yahoo Web sites not be loading not on safari April 10, 2916. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Yahoo mail and yahoo Web sites not to load not on safari as of April 10, 2016. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click on: Remove all data from the Web site

  If this does not help, you can have this Yahoo pages preventing to open a Safari extension or third party plugin installed.

  In the Safari menu, click Safari > Preferences , and select the tab ' Extensions '. If there are installed extensions, one at a time uninstall and exit then restart Safari to test.

  If it is not a question of extensions, try troubleshooting third-party plug-ins.

  Back to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.