What is the new way to include a url (or link) in my e-mail address?

Similar Questions

• What is the best way to inform your contacts of a change of e-mail address?

  I must say my contacts my email address is changing. How can I do that without sending an individual message to each contact? But also I would avoid sending a list of all my contacts to everyone?

  Open a window of writing
  Turn on the sidebar of Contact, if not already on. Press F9 to turn on
  Select a contact group and use the Add button to the BCC at the bottom of the sidebar
  BCC = blind carbon copy = does not reveal the e-mail addresses in the email received

  You may need to do in small groups depending on whether your provider limits how big the group mail, you can send and how big is your address book.

  On the computer standard selection methods allows you to select more than one contact.

  control + a = select all

  Click a contact to select, move lower multiple contacts and hold down the CTRL key while clicking on a second contact = select the two contacts clicked on and everything in between

  Hold down the control key while randomly clicking contacts = SΘlectionner contact clicked

  Hold down the CTRL key while clicking on a selected contact = deselect this contact

• How can I include a url (or link) in my e-mail address

  In previous versions of thunderbird, I could just go to "include" and then "link", and in the drop-down list just paste in the url I wanted to include in the field address link.
  If I try to do that now I tells me something on what there is «no knowledge anchor...» "
  Now, I have to type the url again. By using the paste does not work! WHY?

  As a work around I just paste the url in text form in the mail, but then it does not appear as a link (underlined in blue), so that the person who receives the mail just copy and paste my link instead of power just to click on it.

  Hormazdyar-Kutar said

  In previous versions of thunderbird, I could just go to "include" and then "link", and in the drop-down list just paste in the url I wanted to include in the field address link.
  If I try to do that now I tells me something on what there is «no knowledge anchor...» "
  Now, I have to type the url again. By using the paste does not work! WHY?

  As a work around I just paste the url in text form in the mail, but then it does not appear as a link (underlined in blue), so that the person who receives the mail just copy and paste my link instead of power just to click on it.

  Yes it does, that the conversion is part of the shipping process. If you look in your sent mail they will be links.

• With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way t

  With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way to do this?

  This is the command key, not the control key for a Mac that you use on the layer.

  Gene

• What is the right way to include search terms in your page

  Whether you have a web page that is on a certain subject and holds information displayed on the page.  What is the right way to include terms that you would like this page to see the place looking for but don't want necessarily to display on the page?

  I didn't know if including the key words of research down in small characters with invisible color was the right way.

  I didn't know if including the key words of research down in small characters with invisible color was the right way.

  ABSOLUTELY NOT!  This practice will get your site banned or blacklisted from search engines.  It is considered to be a Black Hat tactics to try to trick the engine of research in order to generate results of traffic to your site.

  Use rather a lot of rich and relevant keyword text and good semantics (h1, h2, h3) supplement in the body of your pages.   At the time, search engines you will find.

  Some excellent links on Search Engine Optimization:

  Google SEO Starter Guide (PDF)

  http://www.google.com/webmasters/docs/search-engine-optimization-starter-guide.pdf.

  Can better accessibility of the Web: better search ranking?

  http://ALT-Web.blogspot.com/2007/07/can-better-Web-accessibility-mean.html

  High rankings Advisor

  http://www.highrankings.com/newsletter/

  SEOmoz.org - Guide from beginners to SEO (1 html page)

  http://www.SEOmoz.org/article/beginners-1-page

  SEO Chat

  http://www.SEOChat.com/

  Submit site maps to 4 major search engines

  http://ALT-Web.blogspot.com/2008/11/submit-sitemaps-to-4-major-search.html

  Nancy O.

  ALT-Web Design & Publishing

  www.Alt-Web.com

  www.Twitter.com/ALTWEB

  www.Alt-Web.blogspot.com/

• Any transfer on a drive hard new - what is the best way?

  Here's a question simple and straightforward, I hope. I currently have two internal hard drives:

  • C (IDE): OS (Win7), programs
  • F (about three times larger than C, faster, SATA): for most of the multimedia stuff

  (And some external and a dvd burner, which should not be relevant to this question.)

  I ordered a new hard drive, which will take over old job of the F drive. Once I have install and F empty on it, I want to move everything that is currently on C for which is now F and the new C drive I start and run Windows from. (C would also get a new drive letter and would only be used for backup purposes).

  I much prefer this without having to reinstall Windows and all my other programs, and without investing in expensive software of type Ghost I would probably use only once every two years or more. I also prefer not to have to partition F, although I'll do it if necessary.

  What is the best way to do it?

  Windows 7 image and move it to the new hard drive

  The only way to avoid reinstalling programs is in the image of the player. Connect the new drive as a slave (if IDE), then partition the new drive, so it has two partitions (or more if you want) - the last partition being slightly larger, then the amount of data on your current hard drive. Also, make sure that the partition you are moving that Windows 7 is greater, then the current partition is.

  Make now a picture of your current hard drive with either programs below and save it to the last partition on your new drive. If you have the recovery of 100MB partition do not forget to include that. Then restore the image of the partition that you want Windows 7 installed-you put in place the same as long as your current drive, and you may need to remove/change the partitions that you have done.

  Both programs are offered free of charge:

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Remove the old hard drive and see if a new start, if it is not:

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Space - increase free hard drive space

  Before taking the free picture of space hard drive if you want.
  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "system properties? window, click the tab "System Protection".
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the slider to the left to reduce the amount of disk space, that System Protection can use.
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• What is the best way to copy the 700 lots of e-mail files to a new computer?

  I'm moving my wife and an old (Thunderbird, Win XP) computer to a new computer (Thunderbird Win 7). It has about 700 local folders with thousands of emails in them. What is the best way to copy to the new computer?

  The easiest is just to copy the whole profile.

  Menu help > troubleshooting information

  Close Thunderbird

  In windows Explorer, select all and copy.
  just stick on a thumb or other portable media to read/write (not the CD or the DVD)

  on the new Machine to repeat the troubleshooting and close the steps to get the current profile folder

  This time all the portable media stick in the profile to replace what is there

  Open Thunderbird, your additions of e-mail contacts does it all

• What is the best way to replace an Appasure Agent with hardware new and new computer name?

  What is the best way to replace an Appasure Agent with hardware new and new computer name?

  Thank you that's what I needed

• What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  What is the best way to transfer pictures from an old computer to a flash drive or a drive back then to a new computer?

  The easiest and most reliable I've found is to make the direct drag-and-drop method.

  (1) on the old computer, open your Windows Explorer and go to your photos.

  (2) open another Windows Explorer window and access your 'Computer' folder and in your flash drive

  (3) drag the photos to the flash drive.

  (4) take the flash drive on the new computer and drag them into your images folder

• What is the best way to transfer the file to a new larger internal drive?

  I am running win 7 ultimate.  I had two hard drives of 500 GB.  C is partitioned to 120 GB (not enough) I just installed a 1.5 terabyte drive.  What is the best way to transfer my data? I would keep the 500 GB (now C: and D :) and add the 1.5 to, I also have a 2 external to that I tried to move my libraries at, but I'm confused my system.)  I don't know much about indexing or mapping.

  \

  Consider transferring all the files that are currently in the second partition of 500 GB drive that is hosting the C: drive (you have referred to as D :) on the new drive.

  Once you have done this, you can then delete the D: partition since this 1 hard drive. This would then extend the C: drive to actually use all the 500 GB drive. Finally change the drive letter for the 1.5 terabyte disk d: it in disk management ( Diskmgmt.mscRun)

  So in the end you have a 500 GB C drive and a 1.5 TB drive D.

  When it comes to move libraries Windows has a utility to do it for you. If you click on your username at the top right of the menu start all your user profile directories are displayed. If you right-click on each one and select Properties, those that support this feature will have a tab 'location '. In this tab, it displays the current location of the file, but has a button "move". You move the folder and all its files and subfolders in a new location and update the references, the system uses for this folder.

  So if you created a folder on the D drive say 'Juli-year' and you right-click on Favorites, some properties, then on location you can move this summary folder in C:\Users\username\Favourites to D:\Juli-An\Favourites. Not all folders in the user profile supports this but all the c library files and a few others.

  Of course if you did as I suggested and ended with a 500 GB C drive you may need.

• What are the new features included in ESXi Hypervisor improvement?

  What are the new features included in ESXi Hypervisor improvement?

  Refer to the technical white paper VMware for what's new in 6.0

  https://www.VMware.com/files/PDF/vSphere/VMW-WP-vSPHR-whats-new-6-0-PLTFRM.PDF

• What is the best way to get certificate of secure Channel, including CCNA, expensive etc. without training?

  Currently, what is the best way to get certificate of secure Channel, including CCNA, etc.?

  In the past, there is a way to get VCP using CCNA without expensive training

  Path 2 on this page: VCP6-NV Certification

  There was already an expiration date on the possibility of using a Cisco certification have the implemented training obligation, but the expiration date has been removed.

• I bought Lightroom Version 3.0 in 2009. Now, I want to install Version 6.3. on a new laptop. What is the right way?

  My older Version 3.2. is to install on PC with Windows XP. The new book has 10 Windows.

  First I got trey to install 3.2. in Notepad. I hope that the serial number will be displayed. Then, I want to do the upgrade 6.3. by a download.

  What is the right way?

  Thanks for the reply.

  Please Install Photoshop Lightroom from here. You can check: How to download, install and activate Adobe applications here.

• Just ordered new MacBook Pro. What is the best way to transfer Photoshop, InDesign

  I just ordered new MacBook Pro. I need to transfer files and applications from my old to my new MacBook.  What is the best way to do this with the least time involved? I have our serial numbers for Photoshop and InDesign available group license.

  Thank you

  Please see CS5 download products

  Hope that helps!

• What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?

  What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?  Recovery of previous PSE6 (Wxp) after a HD failure gave rise to images showing, but not not opening due to connection problems.  Had to restore backup images and rebuild the catalog and albums.  Found a fix to third later that has no support spent PSE8.  Try to make this migration to painless PSE11.

  William47 wrote:

  What is the best way to migrate PSE6 catalogue (Wxp) to new computer W7, PSE11?  Recovery of previous PSE6 (Wxp) after a HD failure gave rise to images showing, but not not opening due to connection problems.  Had to restore backup images and rebuild the catalog and albums.  Found a fix to third later that has no support spent PSE8.  Try to make this migration to painless PSE11.

  This is a very common and classic situation:

  http://helpx.Adobe.com/Photoshop-elements/KB/backup-restore-move-catalog-Photoshop.html

  Just make sure that your backup on the external drive is ok: you should find a "backup.tly" file in the folder.

  Use the organizer of PSE11 to restore the backup of the PSE7: the first step restores all your multimedia files, the second automatically performs a conversion of catalogue in format PSE11.

  Read the note in the link above on the restoration of XP to the ulterior Win operating system. You can also restore to a location 'custom '. For example in a "C:\My new library" folder. Make sure the main folder is accessible to all users, and if you wish, you can move the catalog (database), itself from this location to the default location: Catalog Manager, ability to move catalogs in location that is accessible to all users.