USB 2.0 does not work in bootcamp Windows 10
Hello
I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.
Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?
Bravo to all the answers in advance.
the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.
Tags: Windows Software
Similar Questions
-
Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?
You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?
-
USB 3.0 does not work on HP Pavilion 23 g010
USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...
Hello:
Your model has an AMD chipset and processor. Therefore, the Intel chipset driver will not work.
First, install the AMD chipset driver and restart.
You want to download the 49.7 MB file.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.
If there is any other drivers you need for this model, please let me know.
-
Hello buddies, how to solve this problem (code 31)
USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).
How can I solve this problem?
In addition, you can check the following registry key? :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)
Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?
If so, what is 'Data' for these names?
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
original title: Halo 2 for windows vista
Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer. It will not work in single user either...
Hello
Plase make sure you have the latest version of the GFWL Client installed:
http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx
-
Tycoon Zoo 2 does not work on my windows vita it says I do not have enough system memory and I have a lot to run the game, I can't understand what is wrong
---------------
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Hello!
I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?
Thank you!
Hello
You must get the drivers latset for m computer support site.
Delete the "false: entry in Device Manager and install the new drivers."
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one. Are these drivers or another file that I could use DL?
Hi JasonBedgood,
1. Once you get the error message?
2. did you of recent changes on the computer?This error occurs if the required driver is not installed or the driver is damaged.
I suggest that you update the driver for the device and check.
How can I update the driver for network card on the computer
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on network adapters to expand.
4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
5. click on Update driver software.
6. follow the Wizard update software driver to update the driver for NICs .Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIf the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.
Thanx
Hi rui2010,Place your machine in a clean boot State to see if another application is in conflict with the modem.If this fails, I recommend you reach out to the community Hauwei for assistance:Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Windows to this day does not work on my Windows 7.
Original title: windows update
Windows to this day does not work on my windows 7, the new facility. its valid correctly.
Base on any relocation is to disable windows update search ("Never search updates", restart setting). Then install preferably a recent customer of update windows manually, KB3102810. From this point on windows update is used for the initial search.
Best regards, VZ
-
my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why
my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?
You must download and install the appropriate drivers for your version of Win7 from this link.
http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us
I hope this helps.
-
I work in the field environment.Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).but it runs on the Windows XP computer.For example:-Inventory.exe (work), Sales.exe (does not work)Help, please.
Hello
I suggest you to ask your question at the following link.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/
I would also ask you to contact your IT Department for further explanations.
-
my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.
See the help/support site Tosh or their forums.
Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.
Program compatibility test cannot be invoked
Maybe you are looking for
-
I tried the steps listed, but they did not help. But I received a message that my computer is insufficient for other versions of Firefox. I hope that the Mac Air is sufficient. Thanks to you all.
-
When looking for activex solutions point to Moxilla or Asker, but I can't find the download on each site down. Where can I get the activex for Firefox?
-
When I try to play all the pre-installed games that come with VISTA, I'm directred to oneFile Explorer who says PARTIES REGISTERED. This folder is empty. I went to the CONTROL PANELand enabled GAMES, while they play. I rebooted the computer... they d
-
I have mine but never asked for it. What is this for? I have lost my documents and it says "refer to the printed instructions. I have a system of SR5410F
-
cloned drive error message Microsoft Antimalware has encountered an error updating of signatures
I had this 2nd hand computer, I do not have the recovery disk. I added a hard drive, cloning of the o/s old to it but windows do not recognize some of the programs. I used SEAGATE DISC WIZARD for CLONING I continue to have registry errors as follows: