What is the right workflow for the effect of light in the creation and removal of Grain in After Effects?

Similar Questions

• What is the incoming and outgoing POP3 for AOL?

  What is the incoming and outgoing POP3 for aol?

  Hello

  the servers are:

  for POP3 - pop.aol.com

  for SMTP - smtp.aol.com

  But you need to change the port number in 587 for SMTP .

  You can see here - how to configure Outlook 2002 and Outlook 2003 for SMTP and POP3: click here

  (the last photo is important - you need to check - this server requires an encrypted connection SSL - SMTP and POP3 too)

  LC

• What are the advantage and disadvantage for Standy physical and logical standby

  Hello
  
  What are the advantage and disadvantage for Standy physical and logical standby configuration?
  
  Thank you
  Ken

  Just to add the open text of Vihang Astik that for physical standby, with 11g you can now have the database read write (new features).

• What are the advantages and disadvantages for the largest block size and

  What are the advantages and disadvantages for the largest and the smallest block size block size?

  Smaller size of block

  Benefits
  Relatively large GoodHas air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block, for small lines with a lot of chance of chaining
  access.
  Reduced block contention.
  Disadvantages
  A relatively large air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block of chaining.

  Larger size of block

  Benefits
  Lower overhead, so there is more
  room to store the data.
  Allowed to read a number of lines in
  the buffer with a single I/o cache
  (according to the size of line and block size).
  Good for very large or sequential access
  lines (for example, LOB data).
  Disadvantages
  Waste of space in the buffer cache, if you
  random access to small lines and have a large block
  size. For example, with a size of 8 KB block and 50
  size byte of the line, you will lose 7 950 bytes in the buffer
  When you make a random access cache.
  Not good for the index used in an OLTP blocks
  environment, as they increase the claim to block
  on the leaves of index blocks.

• Small color wheel keeps going in a lot of time and activity stops.  What is the problem and you have to?

  Chromatic wheel keeps going of and activity stops.  What is the problem and the solution?

  You meet the SBBOD (the spinning beachball of death).

  This means your MBP is trying to make his way through some task or tasks that he doesn't have sufficient resources to effectively or if you have a software problem that interferes with the efficient completion of the task (s). Common causes on this discussion:

  1. "antivirus" software from third-party manufacturers
  2. different types of cleaners 'misguided' and other dreck (for example, CleanMyMac, MacKeeper)
  3. trying to run too many processes for the hardware you have.
  4. Insufficient RAM for the processes that you try to run
  5. Hard drive that is too full
  6. CPU or hard drive that is too slow for the software you are trying to run.
  7. hard drive that is running out.

  Download and run Etrecheck http://www.etresoft.com/etrecheck and send the output to an answer here, and we can take a look and see what the problem is.

• What are the issues and how can I put the documents in the files?

  As usual; Oracle is absolutely horrible in providing any kind of basic instructions on the use of the products.

  I need to upload files to a structure (don't care if it's collections, folders, or in mason jars as long as it works) and be able version them and seize those I want.

  I managed to get a variety of things to work with the genericSoapService (cannot use the API in accordance with local policy), but everything I check in goes in (don't know where)

  I don't think I'm even asking the right questions because my web researchers increase irrelevant results.

  What are the issues and how can I put the documents in the files?

  I created a few files like this:

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
     <soapenv:Header/>
     <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="FLD_CREATE_FOLDER">
  <Document>
  <Field name="fParentGUID">C976021E28DD8B26FB2D437B5BF56B7F</Field>
  <Field name="fPath">/RAFT/Appraisals/</Field>
  <Field name="fFolderName">0111234567</Field>
  <Field name="fSecurityGroup">RAFT_ADMINGrp</Field>
  </Document>
  </Service>
  </GenericRequest>
     </soapenv:Body>
  </soapenv:Envelope>
  

  Here's a sample call:

  The virtual path is/Appraisals/0111234567 /.

  The GUID for this folder is CBF8EF9C59F8A6C84EB31C68F0903399

  I see the reference to xCollectionID when I look for answers, but the data is not available for me (see the output below)

  When I run this it stores the file but the file does not appear in the folder.

  <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
       <soapenv:Header/>
  <soapenv:Body>
  <GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
  <Service IdcService="CHECKIN_UNIVERSAL">
  <Document>
  <Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</Field>
  <Field name="dDocType">Document</Field>
  <Field name="dSecurityGroup">Public</Field>
  <Field name="dDocAccount"/>
  <Field name="dSecurityGroup">RAFT_ADMINGrp</Field>
  <Field name="xFHACaseNumber">0111234567</Field>
  <Field name="xFHADocumentType">Appraisal</Field>
  <Field name="dDocTitle">tuesday2document.txt</Field>
  <File name="primaryFile" href="whereami.txt">
  <Contents>dGhpcyBpcyBteSBkb2N1bWVudA==</Contents>
  </File>
  </Document>
  </Service>
  </GenericRequest>
  </soapenv:Body>
  </soapenv:Envelope>
  

  Returns:

  <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header/>
     <env:Body>
        <ns2:GenericResponse xmlns:ns2="http://www.oracle.com/UCM">
           <ns2:Service IdcService="CHECKIN_UNIVERSAL">
              <ns2:Document>
                 <ns2:Field name="reserveLocation">false</ns2:Field>
                 <ns2:Field name="IdcService">CHECKIN_UNIVERSAL</ns2:Field>
                 <ns2:Field name="dSecurityGroup">RAFT_ADMINGrp</ns2:Field>
                 <ns2:Field name="dpTriggerField">xIdcProfile</ns2:Field>
                 <ns2:Field name="dDocType">Document</ns2:Field>
                 <ns2:Field name="scriptableActionErr"/>
                 <ns2:Field name="xPartitionId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xWebFlag"/>
                 <ns2:Field name="dDocCreator">C03999</ns2:Field>
                 <ns2:Field name="dDocAccount"/>
                 <ns2:Field name="xClbraUserList"/>
                 <ns2:Field name="dLocation"/>
                 <ns2:Field name="xWCPageId:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWebExtension">txt</ns2:Field>
                 <ns2:Field name="isNew">1</ns2:Field>
                 <ns2:Field name="IsQueryObjectPersistent"/>
                 <ns2:Field name="xWCTags"/>
                 <ns2:Field name="LockedContents1">dDocName:WCC_Cluster-001208</ns2:Field>
                 <ns2:Field name="dClbraName"/>
                 <ns2:Field name="dCreateDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xClbraAliasList"/>
                 <ns2:Field name="dActionMillis">72487502</ns2:Field>
                 <ns2:Field name="StatusMessage">Successfully checked in content item 'WCC_CLUSTER-001208'.</ns2:Field>
                 <ns2:Field name="dIsPrimary">1</ns2:Field>
                 <ns2:Field name="isInfoOnly"/>
                 <ns2:Field name="dActionDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="xWCPageId"/>
                 <ns2:Field name="xLibraryGUID:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocID">1216</ns2:Field>
                 <ns2:Field name="dPublishState"/>
                 <ns2:Field name="xFHACaseNumber">0111234567</ns2:Field>
                 <ns2:Field name="doSorting">0</ns2:Field>
                 <ns2:Field name="primaryFile">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevisionID">1</ns2:Field>
                 <ns2:Field name="xExternalDataSet"/>
                 <ns2:Field name="scriptableActionFunction">determineCheckin</ns2:Field>
                 <ns2:Field name="UseForwardOnlyCursor"/>
                 <ns2:Field name="noDocLock">1</ns2:Field>
                 <ns2:Field name="dID">1208</ns2:Field>
                 <ns2:Field name="xWCTags:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xPartitionId"/>
                 <ns2:Field name="xComments:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dInDate">10/7/14 8:58 AM</ns2:Field>
                 <ns2:Field name="dDocOwner">C03999</ns2:Field>
                 <ns2:Field name="dUser">C03999</ns2:Field>
                 <ns2:Field name="isDocProfileUsed">true</ns2:Field>
                 <ns2:Field name="scriptableActionParams"/>
                 <ns2:Field name="dpEvent">OnImport</ns2:Field>
                 <ns2:Field name="xExternalDataSet:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifier">C03999</ns2:Field>
                 <ns2:Field name="DocExists"/>
                 <ns2:Field name="dConversion">PassThru</ns2:Field>
                 <ns2:Field name="StatusCode">0</ns2:Field>
                 <ns2:Field name="xStorageRule:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dStatus">DONE</ns2:Field>
                 <ns2:Field name="dOriginalName">whereami.txt</ns2:Field>
                 <ns2:Field name="dRevClassID">1208</ns2:Field>
                 <ns2:Field name="idcToken"/>
                 <ns2:Field name="dRevLabel">1</ns2:Field>
                 <ns2:Field name="dDocName">WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList:isSetDefault">1</ns2:Field>
                 <ns2:Field name="xStorageRule">webasset</ns2:Field>
                 <ns2:Field name="localizedForResponse">1</ns2:Field>
                 <ns2:Field name="dPublishType"/>
                 <ns2:Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</ns2:Field>
                 <ns2:Field name="dFormat">text/plain</ns2:Field>
                 <ns2:Field name="scriptableActionType">3</ns2:Field>
                 <ns2:Field name="dDocTitle">tuesday2document.txt</ns2:Field>
                 <ns2:Field name="dpAction">CheckinNew</ns2:Field>
                 <ns2:Field name="primaryFile:path">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="refreshMonikers"/>
                 <ns2:Field name="xWCWorkflowAssignment"/>
                 <ns2:Field name="isEditMode">1</ns2:Field>
                 <ns2:Field name="refreshSubMonikers"/>
                 <ns2:Field name="xFHADocumentType">Appraisal</ns2:Field>
                 <ns2:Field name="changedMonikers"/>
                 <ns2:Field name="dRevRank">0</ns2:Field>
                 <ns2:Field name="StorageRule">webasset</ns2:Field>
                 <ns2:Field name="xWCWorkflowApproverUserList"/>
                 <ns2:Field name="xComments"/>
                 <ns2:Field name="dAction">Checkin</ns2:Field>
                 <ns2:Field name="isDocProfileDone">1</ns2:Field>
                 <ns2:Field name="xWebFlag:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dRawDocID">1215</ns2:Field>
                 <ns2:Field name="xLibraryGUID"/>
                 <ns2:Field name="StatusMessageKey">!csServiceStatusMessage_checkin,WCC_CLUSTER-001208</ns2:Field>
                 <ns2:Field name="xIdcProfile:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dWorkflowState"/>
                 <ns2:Field name="dProcessingState">Y</ns2:Field>
                 <ns2:Field name="dDocCreatedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dDocAuthor">C03999</ns2:Field>
                 <ns2:Field name="dOutDate"/>
                 <ns2:Field name="dIsWebFormat">0</ns2:Field>
                 <ns2:Field name="scriptableActionFlags">12</ns2:Field>
                 <ns2:Field name="isCheckin">1</ns2:Field>
                 <ns2:Field name="RenditionId">webViewableFile</ns2:Field>
                 <ns2:Field name="dExtension">txt</ns2:Field>
                 <ns2:Field name="VaultfilePath">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
                 <ns2:Field name="prevReleaseState"/>
                 <ns2:Field name="isStatusChanged">1</ns2:Field>
                 <ns2:Field name="dReleaseState">N</ns2:Field>
                 <ns2:Field name="dWebOriginalName">WCC_CLUSTER-001208~1.txt</ns2:Field>
                 <ns2:Field name="xWCWorkflowAssignment:isSetDefault">1</ns2:Field>
                 <ns2:Field name="dDocLastModifiedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
                 <ns2:Field name="dFileSize">19</ns2:Field>
                 <ns2:Field name="xIdcProfile"/>
              </ns2:Document>
           </ns2:Service>
        </ns2:GenericResponse>
     </env:Body>
  </env:Envelope>
  

  CBF8EF9C59F8A6C84EB31C68F0903399

  Replace fFolderGUID by fParentGUID

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• What are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes game against external hard drive, Solid State etc. to store my songs iTunes, playlists, ratings etc?

  First question: what are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes Match against Solid State external hard drive etc to store my songs iTunes, playlists, ratings etc?

  Please let me know what are the alternatives for storage of my songs, playlists, song etc. other than iTunes game ratings ($ 24.99 / year)?  Is there a way to store all my songs with my song ratings, playlists, etc. with a CD song quality? Most of my (currently 130 GB) songs on my computer are CD quality that I prefer to keep as well as my notes of each song (i.e. 5 * vs. 4 * etc.), playlists, groups (music, classical, popular, country etc.).  What are the advantages and disadvantages to store my iTunes songs while CD quality with my personal notes, reading lists, groupings in the cloud?  ICloud of Apple Drive ($ 2.99 per month or $36 / year for 200 GB) would be the best way to automatically update and maintain my rankings iTunes personal including the future editions of the song etc or using Amazon, IBM, Microsoft etc cloud or an external hard drive SSD would work as well and maybe cheaper?  I currently have my iTunes on a PC of 2007 with vista (I use a 1 8T Western Digital external upward by car for my personal info all over HP, songs, photos etc. which is currently close to 170 GB) but also have an Apple i-phone 6 & I Air cushion.  Although I did not need to have all of my music with all their sides, etc. available on all of my devices at all times as iTunes game, I still would have easy access to information on both my PC and my iPhone or iPad?  Thank you.

  In my opinion?

  I back up my data to an external drive for several reasons.  The first is my data - if I put on the cloud, someone else has control over it, they can see what I have and change the preferences to what they see of marketing.

  Almost as important as that - if I had to rely on the cloud whenever I wanted to update my playlists on my phone, I need a better internet connection I have now (working at sea).  To get the best out of the cloud, you need a solid link to home, work or mobile.

  As a spin-off - I hate the fact that Apple take away a feature in their software updates and then allow an app to be sold in their store to replace this feature - or worse still, some features that were available before the updates are now "cloud only."  And Yes - you have to pay for the cloud.  I like most of the people do not appreciate the 'accomplished fact. "

  From the back of the external hard drive ASI downside, is that to be safe, you need to store outside in a separate computer place.  If keep you them together, if one is lost, probably, they are both.  That is to say for me a full backup before you travel, then a new upward as soon as I go home.  Downside is how much data may be lost between the two back ups if I needed to restore.  For me, its worth the risk.  If I was away and say had bought a ton of new music and couldn't go home anytime soon, I can always head to the store and buy a new external drive, they are massively expensive.  Even if my computer has to go for repair and my remote is to halfway around the world - I want to buy a new one.

  Now, some will say that once you buy a new external, you spend more than you would on a cloud subscription.  It's true, but in the 6 years following the purchase of Mac that I've only had to buy a new external once - so with a little luck and planning - it works.

  I left took well - I am not a subscriber of cloud, nor do I want to be.

• Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  We are the WEC2013 portage for a controller ARM. The operating system works very well.
  We have made our development using SYSGEN_FSREGRAM and SYSGEN_FSRAMROM.
  We are now developing driver SD card. We have helped in SYSGEN_SD_MEMORY, SYSGEN_SDBUS, SYSGEN_SDHC_STANDARD, and FAT in the catalog items for SD card.

  We did our sdhc.dll to our platform.

  We get the following error,

  PID:00400002 TID:004 B 0006 + SHC_IOControl (0xa5838f80, 0x00071c24, 0 x 00000000, 0, 0xac67fc70, 16, 0xac67f928)
  PID:00400002 TID:004 B 0006-SHC_IOControl(rc = 0)
  PID:00400002 TID:004 B 0006 FSDMGR! MountStore: Failed to open store "SHC1;: error = 31

  Can we do something else?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  Your keyboard is set to french. To resolve this problem, look at the right hand of the bar at the bottom and you will see a keyboard. Click on it and press U.S..
  I hope this helps.

• What is the stage and the tools I need to make too many database to my project in bbndk10

  I am we will begin to develop natively, I do just the screen and I want to

  What is the stage and the tools I need to make too many database to my project in bbndk10

  You probably want to look at SQLite. There is a tutorial here: http://www.sqlite.org/quickstart.html

  I believe you can right click on the project and choose 'Configure-> Add library' and choose ' SQLite 3 "from there to add to the library and include directories of your project.»

• The screen of my laptop turns off when windows start. What is the cause and how can I fix it?

  Original title: computer failure

  the screen of my laptop turns off when windows start. What is the cause and how can I fix it. Thank you

  You have the screen image out to another monitor (one that is not plugged in fact). How you pass to the internal laptop display varies, but most cell phone companies make a combination of keys, such as Fn + F6 or something.  Looking for a symbol that looks like a monitor.  It is usually color coded and requires activation of a Fn key.

• CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them.

  CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them. Generated the log shows "ERROR: DS015: cannot read the target of the symbolic link to the file source (...)" at the end.

  What am I supposed to do?

  Thank you, Carlo Romano

  Finally, what worked for me was to completely uninstall and reinstall both apps until 2015 for CC.

  Thanks a lot for the quick reply anyway.

  Carlo

• What are the advantages and disadvantages about installing vSphere 5 on USB

  I am having trouble to make the iscsi boot and mused with a temporary workaround.
  I want to install vSphere 5 on a USB key, boot on USB and when all the problems with boot iscsi are resolved, use vMotion to migrate the virtual machine to another ESX host.

  What are the advantages and disadvantages regaring USB-install?

  Maybe it's even better that run start iscsi.

  Hello

  We have no difference between USB install and install ESXi on hard drive. all functions and features are the same. You have following additional configuration on USB Installer if necessary

  -Remote Syslog configuration

  -Netdump configuration or change the coredump on hard drive partition by creating additional VMKcore on hard drive.

  -Try to use the qualified USB key (refer to the hardware vendor documentation).

  Not looking for any specific limitation other than mentioned above.

  Thank you

  Nithin

• I have to re - install acrobat 9 standard because of "impossible to extend the license procedure (148: 3). Where can I download? Or better yet to upgrade to XI (what is the price and how to do this)

  I have to re - install acrobat 9 standard because of "impossible to extend the license procedure (148: 3). Where can I download? Or better yet to upgrade to XI (what is the price and how to do this)

  Hi riffpizcy,

  148: 3 error is a license error.

  Try following the steps in the KB: error "Licensing has stopped working". Windows

  You can download Acrobat 9 standard of: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8

  You can upgrade to Acrobat 9 Acrobat Pro 11 to $199 USD

  Please visit: buying guide | Adobe Acrobat Pro XI for more information.

  Kind regards

  Rave