Zoom office.  Help, please.

Similar Questions

• My video is zoomed/cropped; Help, please!

  My video is slightly zoomed in, cropping of important documents, despite a setup my sequence to match the resolution and the dimensions of the video settings. In the image below, the video on the left is what I want my project to look like video. The video on the right, what it actually looks like. Any ideas on how to solve this problem? I spent many hours editing this project, and that's the last thing in my way! If you can solve this problem, I will send you a video of me trying to do a backflip and give you $10 via paypal.

  Chances are defective obtained settings during this copy of a copy of a copy, etc.

  Open the timeline is a form of clip in the effect controls panel and look what it says for the scale.

  If its more than 100 then select all clips on the timeline, right-click and hit set to Framesize.

  Edit:

  I think the trouble starts here:

  How to make my images occupy the entire screen in my video?

• Start bar and icons Office GONE! Help please!

  Not very well why, but after having turned on my laptop in a day has more no tools start toolbar or the desktop icons! I am having access to internet through CTRL + ALT + DELETE and then running a new program from the Task Manager. Does anyone know how to get back them, because I can't even in the start bar to perform a system restore. HELP PLEASE! Thank you very much!!

  Hi jade,.

  The office layout is normally stored as part of your user profile in the Windows.

  You have any other ID user defined on you laptop you can use? They should be defined with administrator access (assuming you are using XP) in order to correct your own id.

  Default you could boot into safe mode and log on to the identification of the ADMINISTRATOR who would then let lets redefine you own ID.

  HTH

• My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files. Help, please.

  My Windows XP Professional cannot update SP3 because of lack of PRO11. Or the MSI files and I have the original MS Office 2003 CD to locate its files.  Help, please.

  Hello

  1. when exactly you get this error message? While trying to install service pack 3 or while trying to install a windows update?
  2. What is the full and exact error message?

  Please answer these questions and tell us more about the issue, it could help us help you better.

  See the bottom of the articles that might help you.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

• Office a half is white, someone help please...

  Office a half is white, someone help please... tried to restore and properties. Thank you

  Hello Tp6012,

  Thanks for your post.  Have you tried to connect another monitor to see if this problem is related to the computer, or if you may have a faulty monitor?  You can also try to go to your computer manufacturer's website and download / install the latest video driver for your computer.

  See you soon

• My lightroom says that my trial has expired, but I have never had a trial. I bought Lightroom 6 (CD version only, office) and installed on my computer. Now I can't import pictures and it'e telling me my trial happened to expire. Help, please.

  My lightroom says that my trial has expired, but I have never had a trial. I bought Lightroom 6 (CD version only, office) and installed on my computer. Now I can't import pictures and it'e telling me my trial happened to expire. Help, please.

  License with the serial number of the disk, which is usually inside the box.

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• HP 280GI: I am looking for a firewire which works with mirror of HP280GI PC Tower. Help, please

  I'm looking for a FIREWIRE port for my new HP280GI OFFICE. Please update me

  Deredman, welcome to the forum.

  Here is a card that should work with your computer.  It requires a vacant PCI Express x 1 slot on the motherboard.

  Here is the computer Service and Maintenance Guide .  It shows available on P. 1.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Operating system not found. Help, please!

  I used a recovery disk for the factory restore my vgcjs210j office. Now when I turn on my computer, I get the operating system not found. My hard drive is listed, but I can't restore the default settings. Help, please.

  Hi Cjenkins1989,

  It is possible that the partition that contains your recovery is corrupt. Error message after you use the recovery disk or have you been able to use the computer without a problem before the error message?

  -MarkC

• Cannot change the screen resolution. Help, please

  I recently reinstalled Windows XP (service Pack2) on my computer and restored the office to the factory settings. Now, the screen resolution is stuck at 640 x 480 and 16-bit color quality as this was not a problem before. The screen that appears under 'type of screen' in the advanced settings menu says "default monitor" and the properties button is not clickable. I tried to connect another monitor to the PC, but it doesn't help. Can someone help please I really need to change the resolution of the screen to a higher quality? Also, the PC has an internet connection if that makes a difference. Any help is greatly appreciated. Thank you.

  ... What other drivers in addition to the graphics card and network card should I try to install?

  In fact, those who are newer than your current drivers.

  I understand your reasoning for installing the monitor driver, however, I'd personally chipset (motherboard), video, audio and network (LAN) first. After updating the video driver, there is a chance that it recognises so the screen correctly.

  I don't know if you have reinstalled Windows XP from floppy disks to install Windows or Dell installation/recovery disks or partition restore hidden, but nevertheless, the drivers that were installed during installation is as new as the installation media. Given that the media are at least 5 years and more (maybe 8 years and more), there is an excellent chance that all the material and device drivers have been updated.

  If you know the serial number or the Express Service Code on your machine, you can enter the page linked below and it should display all the downloads available for your computer. Otherwise, you may need to select one of the options under No., for example to choose from a list of all Dell products (it does not list a Dimension 1100/B110 that has many drivers/downloads available).

  Driver downloads &
  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  The page linked below contains a lot of good informaiton, including a list of drivers and downloads that may be available. I think that Section 3: how to determine the components in my computer? and Section 4: how to download and install a driver will help you get the correct drivers for the hardware devices in your computer.

  How to use drivers and downloads website
   http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_324722&isLegacy=true

  The page linked below describes the order in which Dell recommend for installing drivers.

  How to download and install drivers in the correct order
   http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_1A0C0937D62A8739E0401E0A55174744&isLegacy=true

  Kind regards

• When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  Can someone help me please, I don't know how to use a computer I was googlen 4 days! When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  From what you say, you are probably unable to start Windows.

  In this case, when you start the computer, keep tapping the key "F8" on the keyboard until the Advanced menu comes up. Then choose "Safe Mode".

  You will see something like your ordinary, here to enter office "chkdsk volume: /f" (replace with your hard drive volume, in most cases, it's 'c') at the command prompt.

  For reference:

  http://support.Microsoft.com/kb/315265

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Drive hard keeps fills, using CC Cleaner & Deffrag for a few weeks now. I do go down, & then it fills again! Help, please.

  I'm running Vista 64, SP2 and my hard drive keeps filling.

  I used CC Cleaner and Deffrag program for a few weeks now.

  (just the CC Cleaner on its own takes me awhile because I don't want to delete everything I shouldn't)

  I have moved away from home to the office and checked to see if there are "too many connections (?)" just in case it's something in the process.  Honestly, I can't say if there are too many?

  I know that I don't want to lose the ability to remote into my office... so I leave them alone.

  I wanted to delete some 'hidden' files $Recycle... but am concerned that my operation files original files are mixed in the files?

  Is there a way to return to the top... few of the restoration copies?

  AND... How can I stop this from happening?  I spent hours trying to manage it.

  It comes down, then it fills again!

  Help, please.

  Hello MetisLight,

  Here is a link to another user having the same problem.  Have you tried to try the steps listed?  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/harddrive-filling-up/e9b60b0c-6b9d-4e12-85d9-9a875cc1aa8a

• Cannot upgrade vista since December. Help, please.

  Since December 23 last year I have not received updates vista and now the program fails to work properly. I have to restart at least twice a day. Host Windows fails and then I can't use the windows Explorer, and then the office, then I can't open word. etc, etc, etc. The software seems naturally escalate if I do not receive the updates. Help, please...

  Hi Michael Gilwood,

  Since you have tried all the troubleshooting steps and still faced problems, I suggest you do an InPlace upgrade.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.
  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD

  Note Run a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot. To perform an upgrade in-place, follow these steps.
  a. close all running applications.

  b. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  c. in the settings window, click install now.

   

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  a. click go online to get the latest updates for installation (recommended).

  b. type the CD key if you are prompted to do so.

  c. in the "Windows Installer" page select the operating system you want to update or Inplace.

  d. click Yes to accept the Microsoft software license agreement.

  e. on the which type of installation you want? of the screen, click upgrade.

  f. when the installation is complete, restart your computer.

  For more information, please see the link:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Once the upgrade has completed, you must activate your copy of Windows Vista.

  For more information about how to activate Windows Vista, see the following article:

  How to activate Windows Vista.

  http://support.Microsoft.com/kb/940315/

  Hope this information is useful.

• 80070663 windows error/can't open Excel or Word or Outlook. Help, please

  80070663 windows error is coming when the computer is to install microsoft updates.  I am now unable to open Excel or Word or Outlook because it trys to prepare the windows installation program and then returns with a fatal message.  I am using windows vista with professional 2010 package.  Help, please.

  Hello Andybvat,

  Thank you for your message.  See this article for a possible solution to your problem:

  You receive an error message when you install an Office program or you open an Office program or a document

  We can't wait to hear back on your part.

  See you soon

• Help please! ... No UPDATE of VICTORY since * 2011 *! Win 7, 32 bit, the ASUS Eee netbook

  Hello world

  I know some basics, but can't seem to understand this one!

  ASUS Eee PC 1011PX, Intel Atom N570, Windows Starter, Service Pack 1, 32-bit, @1. 66 GHz 1.67 GHz, 1 GB ram... (netbook)

  Does not at all, update... .last updated 2011!

  Sitting in an office that is not used for 3 years.

  Says "updates more recent audit for 2014' and the last installed 2011." .... 134 important updates available (409,7 MB).

  Said to Windows is activated, and the general system is ok...

  * (slow system, but it was always like that because only 1 GB of ram, or so that's my guess)

  As a first step:

  I have re-uploaded (free editions of their sites) Ccleaner, Malwarebytes, and Superantispyware... then double checked versions for my 2 other laptops (HP win8 and an even older Acer with Vista) where I have these 3 tools also.

  Updated program of Avast and definitions.

  * has no re - download Avast *.

  CCleaner.

  -scan analysed then main to remove.

  -analysis of the registry. says it fixes stuff, but I note he's sorry.

  Malw.

  -hyper scan

  -analysis of the threat. found a few away from browser... wjam/yahoo stuff and a few others.

  Superantisp.

  -analysis of critical points. Ok

  -quick scan. typical minor stuff, nothing to note.

  -full scan. even

  Avast.

  -smart scan

  -quick scan. Ok

  -full scan. Ok

  -Start scan. Ok

  -After above scans, always had prob, so I changed to high sensitivities/heuristics, and made sure that all of the scans scanned all drives including system and rootkits player... then back above scans.

  I tried Microsoft Fixit suggested troubleshooting tool... said it fixed 1 corrupted registry.

  ++ FINALLY ++ Rebooted in safe MODE and above repeated scans. (with the exception of Avast, it is not designed for safe mode more)

  ALL OF THESE PROCEDURES WAS NOT ABLE TO REPAIR WINDOWS UPDATE :(

  * Maybe I have to investigate my diary of the events/spectator, looking for the exact time that it update?

  * Maybe tweaking avancΘs (which I do not fully understand)... and create analyses in all of the above tools?

  * I don't have any method of restoration again, but do not know if it is available as too far behind. AND I have no boot disks/Win to start to update my system.

  Help, please!

  See you soon,.

  -

  Have you tried:

  https://support.Microsoft.com/en-us/KB/971058

  Automatically reset the Windows Update components.  There is also a very detailed manual procedure there that looks like it could help.  It's not clear no dialogue on this page that the automatic procedure does the same thing.  Worth a try!

• BlackBerry Smartphones Blackberry RIM 7280 - Need help, please!

  Hello, everyone.  I hope you can help me!

  I bought a used 7280 on eBay.  I have all the accessories and the data plan from my supplier of wireless.  I can access internet on it, but I want to register my address e-mail and IM on it.  For some reason, it isn't recognizing anything.  I get error messages when I try to download, & Office Manager said that my account is not configured correctly.

  I entered addresses POP3 and SMTP provided by Yahoo for me, and it still does not.

  Help, please!  Thanks in advance!

  Hello and welcome to the Forums of Support BlackBerry.com.

  You have registed the device with your operator, by logging into your BIS account and affecting the e-mail account, he?

  http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3F

  http://www.BlackBerryFAQ.com/index.php/How_to_add_/_delete_email_addresses

• BlackBerry Smartphones later Software Update for Bold 9700 PROBLEMS! Help, please!

  I know there is already a post on this topic, but this problem requires immediate attention.  Received an email this morning telling me there was an update of software available.  Plugged into the Desktop Manager and installed.  Went well until that right after the restart.  A frozen everything in closing the restart and from the restoration.  Now, all my data disappeared from my phone, I have no e-mail capabilities, no internet access, etc.  Now when I plug in the Office Manager he's just here saying that it connects to the phone, so now I can't even use a restore point to just run.  Right now I have a phone that has nothing of my data and can only make calls and send texts... might as well have a nokia from the old school!  I use this phone every day to work.  I need to work and so far no feedback of any type for a solution.  And of course you can not contact Blackberry via phone or chat to get help, who don't pee at all!  Between my phone freezing and having need of a hard reboot every day or so for the past month and now the matter today, I'm ready to think about Android.  That I hate because I love my blackberry.  Did someone's Blackberry out there listen to/read such things?  Need to get this fixed fast number.  Help, please!

  Sorry for the mixture to the top. It is under the common files, reasearch of movement, RIMdevice manager or AppLoader (I don't remember which folder). Anyway it must single .exe file and it is one that should be deleted. There is not any other .exe files in another folder. After that, I was able to connect to the Desktop Manager. Here's the adresse_web of a forum, I also found that may be useful. http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  I hope this helps.