What is the unknown user with a red question mark next to it.

Similar Questions

• R310 Dell: What do the unknown fans with PCIe cards?

  Hello

  I'm looking to replace my aging modified PE2950 gen 3 with a server that is more effective, while maintaining 2 power PCIe slots.

  My use case is not particularly normal in that it's for a home installation and the server will be install re-usable to serve my ad and TVServer for home.  Therefore, I need to be able to add two DVB - S2 cards on the chassis to receive satellite service.

  I know that with some other manufacturers, installation unknown PCIe cards cause their fans go nuts as they assume that the maps are overheated.  How Dell servers in this situation, in particular the R310?  The R310 seems to satisfy all my needs and I think it would be perfect.

  In addition, until I removed the Perc 6 / I of my R410 it was quite noisy, how the R310 Dell price for the fan noise?  The system, with all remains will be in the basement in a rack Assembly away from the living areas. I think I could deal with what up to all about 60dba but especially because it would be too noisy... I understand that 1u rack systems are not designed to be quiet around but a few real comments here would be great.

  Any help that you can provide, or direction is appreciated.

  Thank you very much

  Chris

  Hello

  Bernos

  I know that with some other manufacturers, installation unknown PCIe cards cause their fans go nuts as they assume that the maps are overheated.  How Dell servers in this situation, in particular the R310?

  PCIe cards unknown/3 rd party causes servers 13 g and likely all generations run fans to its maximum SPEED, regardless of the temperature. To my knowledge, it is new with our servers to 13g. I don't think previous generations like 11g detected what exactly was settled in the PCIe slots. They changed fan thresholds based on whether or not the slots have been filled not based not what was in the slot.

  I can't say with certainty what will be the decibels. We do not have a list of all the possible configurations and the decibels. The highest specified configuration in my Datasheet does not include additional PCIe cards, but the dBA listed under stress with this population is 43. I can't guarantee that the system will operate less than 60 dBA, but I suspect that it will do so.

  Thank you

• What is the unknown file with lots of letters and numbers. I get access denied.

  I spent my files on my computer and I came across a folder that has a bunch of letters and numbers... I tried to open it to see what it was and he repeated access is denied. Why does say his refusal so im the administrator?

  However, you are an administrator, but you have not all permissions to access some or record system. To do this, you will need to take ownership of the file or folder to access this topic. Do not forget that the change or deletion of records that are denied access may cause problems on your computer.

• Why the unknown user accounts

  What are the unknown user accounts? I want to give them all the permissions on my computer?

  Hello

  Please contact Microsoft Community.

  Please confirm where you can see this unknown user account?

  Where is it ask permission?

  What is the exact message you get?

  A user account is a collection of information that tells Windows the files and folders you can access, what changes you can make to your computer, and your personal preferences, such as your desktop background or screen saver. User accounts let you share a computer with several people while having your own files and settings. Each person accesses his user account with a user name and password.

  Refer to:

  http://Windows.Microsoft.com/en-us/Windows/user-accounts-FAQ#1TC=Windows-7

  Get back to us with the required information and we will be happy to help you.

  Kind regards
  Anusha

• What are the costs associated with the synchronization

  What are the costs associated with the synchronization

  Simple answer is: No. Cost zero.

• What is the file brayhs with size zero?

  Original title: brayhs

  What is the file brayhs with size zero?
  How can I clean my system (windows Server 2003) this?

  Run a full scan of the system and set your PC to show hidden and system files and the folder and check if there is any suspicious element or just try to delete.

• I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection.

  Original title: Weird problem.

  My computer says it is connected to the network and the network is connected to the internet, but I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection. I have reset the router and the computer many times and the problem is still there. Any ideas on how to solve this problem?

  Very strange that this issue has been raised suddenly and even system restore back the working time is not solve it.  At this point, I suspect something mischievous because restoration of return must be a guaranteed fix.  If it worked on Friday, it should work if restore you backup on Friday.

  I ask you to check if your network card has got an update which could have features broke, but that can't be the problem because the restoration of return would be handed over the old version.

  Indeed, using restore in a working time essentially says that this isn't a configuration problem, because configuration is in a known-to-be-working state (because he worked at the restored time).

  I would therefore start at this stage, verification of hardware, antenna, connections, equipment devices.

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• What happened with my CC of Photoshop and it's Plug - ins, all disappeared... There where the Photoshop logo was in the dock is now a big question mark...?

  What happened with my CC of Photoshop and it's Plug - ins, all disappeared... There where the Photoshop logo was in the dock is now a big question mark...?

  Please see: cannot install Add Ons for the Creative Cloud 2015 products

  You can also check: the basics of the Mac: the Dock holds your favorite applications, documents and more - Apple Support

  Let us know if that helps.

• Red question mark on the road to navigation network system process

  Hi all
  I correctly mapped network drives that I can view, browse and select using the API "GetOpenFileName().
  Everything works well for all applications running on my XP system. My user has administrator access.
  I also put in place a print (part of the spooler process) using the API "GetOpenFileName()" even driver.
  In this case, the network drive (each net disk) on navigation Gets a red question mark on it.
  Also, by selecting "MyMachine" tab does NOT display my network, only the Local drives (C:\).
  I can go by selecting the files on the network drive, marked in red, but access to files (open + reading) subsequently cause errors.
  Anyone who has an idea why this happens on the process system (spooler) only?
  Thank you very much!

  Hi WalterXS,

  Your computer is connected to a server?

  If the Windows XP computer is in the domain, I recommend you to ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Red question mark on the desktop for inadmissible USB Ext HD icon

  My new WD 1 t ext HD works on other computers.  On mine, after downloading an update of windows XP is no longer is recognized.  Works fine before that for backup, etc. After update of windows, the desktop icon remains, but there is a red question mark on it.  I can't find the drive letter or device in my computer and other suggested methods. The power supply to the hard drive light stays on. But restarting, restoring the system, change the location of the usb connector, plug the cables all tried without success.  Sometimes it is his own. Not lately.

  By trial and error, discovered what is not clearly described elsewhere.

  Windows Update is the culprit. Proven by repeating its use.

  But there is something to "unplug" and "reconnect" the HD position to have your PC "recognize" after the problem occurs.

  All the following must be done AFTER PC IS SHUT DOWN:

  1. Remove and reconnect the power cord HD

  2. Remove and then reconnect the USB cable to the HD connector.

  3. pull out and then plug the other end of the USB cable to a USB port.

  THEN RESTART your PC.

  MS should explain that more clearly - and should recognize this problem of Windows Update.

  From my experience, Windows Update causes many problems still unrecognized in XP SP3 and possibly other versions of Windows.

  Only hope it helps others in the meantime.

• I'm new to lightroom. I downloaded a bunch of folders FRO my Mac HD. There is a question mark next to each one. What does that mean?

  I'm new to lightroom. I downloaded a bunch of files from my Mac HD. There is a question mark next to each one. What does that mean?

  Thanks for the update.

  Question mark on these files means that you must be moved/renamed/deleted files on your hard drive where they were originally.

  When you import an image in Lightroom, it does not matter the original copy of the image instead it saves to the original location when you import or where you copy the image using Lightroom and it always refers to this place.

  So if you want to move or rename these images, you should do it in Lightroom instead of outside of Lightroom.

  Now, if you know the current location of these images on your hard drive, you must move them into Lightroom.

  See this article for instructions: How to find missing photos in Photoshop Lightroom

• Synchronize the Table Users with user Table SFDC Eloqua... has anyone done it?

  We can now use autosync integration to new downloads and update existing users of Eloqua that exist in the Salesforce.com user Table. I built a proof of concept to do this, so that SFDC is the system of registration of data of rep because I've been in a situation where marketing updates users eloqua for customization and data does not match what exists in salesforce, duplicate efforts...

  In any case, here are some of the complications that I find so far:

  The key identifier Unique to the Eloqua user Table is the 'User name' field and cannot be changed (his knowledge actually not yet public, I had to find out the hard way) that it should really be, e-mail address. According to Eloqua, the username is "firstname.lastname", "Nick.McGirr" would be my username Eloqua.

  1 Salesforce.com User Table does not have a username like that field. Your team of DEV SFDC will probably have to invent one that will take the first name and family name and create "first.last" on a new field to map to for your autosync.

  2. here's the real question, what does Eloqua if the company of enterprise-level and has a handful of John Smith of sellers? Do I need to say to the SFDC DEV team to make 'John.Smith1', 'John Smith2' and 'John Smith3'? What is the convention of naming of duplicates?

  I've referenced that a certain time before being published as a feature that there could be a possibility to do this type of synchronization, here. Some might find this information useful to this topic: http://topliners.eloqua.com/message/1795

  Hi Nick,

  We have done that... and implemented the exact logic you mentioned... with minor twist... take the first name, last name and add the ID unique company Emp in a field and operate as username for Eloqua. You can even add

  I hope this helps.

  Thank you

  Amit

• What is the icon associated with a graphic symbol?

  Hello.

  as a beginner in animation and using animate CC, I find a lot of things confused, so I decided to go slowly and carefully through the Adobe Help documentation in order to understand things.

  An example of what I find confusing is the icon associated with a graphic symbol such as illustrated on page 373 of the Adobe animate help PDF is different from the icon that appears in the Animate library panel.

  

  For example. I've attached a screenshot of the graphical symbol icon, as shown on page 373 of Adobe animate PDF User Guide, and I have attached a screenshot of the library panel, displaying a symbol graphic icon named "symbol 1", after the bitmap imported PSD has been converted to a graphic symbol.

  You can see that the graphic symbol in the library Panel icon is different from the symbol icon graphic on page 373 of Adobe PDF animate. -each icon consists of a triangle, a circle and a square, but in the PDF version the three forms are arranged differently to the icon displayed in the library panel. that is to say that they are not the same icon.

  Could someone explain to me why the icons are different?

  Thank you.

  I'm guessing a sloppy editing tutorials is at fault. Both icons for graphic symbol and key have changed in CC of Flash versions for icons used in previous versions of CS. I have no idea why this change was made. The only advantage I see is confusing for users.

• What is the yellow square with a question mark on the page OPTIONS of FireFox? Have a peak.

  There is a yellow square with a question mark on the FireFox OPTIONS / settings page.
  If the mouse enters it, it reacts like it is something to click, but no indication that it is.
  Is it supposed to be there and if so, why?
  He has a POINT of MARK BLACK inside the small SQUARE of YELLOW.
  Any help is appreciated.

  This is the help screen. Press the key.