What is the wheel yellow in the left margin of the subject field of the thread pane?

Similar Questions

• What is the banner that comes down from the top of good windows support for?

  Whenever I scroll down to read a page on the Apple forums, a banner comes down from the top of the window. The banner has the question on what started the thread.

  I don't see any use it serves unless you have a VERY short attention span. It's boring and covers a text (reduces the size of the window), so it's worse then 'not useful' - it is harmful.

  Yes, I see the 'X' which I can click to close the banner - but is it possible that I can turn off this feature altogether?

  Turn it off, no.. Guests sometimes read the posts here and see if all goes well your comment.

  Alternatively, you can provide direct feedback here:

  https://www.Apple.com/support/feedback/?ref=contact-us

  Barry

• Small color wheel keeps going in a lot of time and activity stops.  What is the problem and you have to?

  Chromatic wheel keeps going of and activity stops.  What is the problem and the solution?

  You meet the SBBOD (the spinning beachball of death).

  This means your MBP is trying to make his way through some task or tasks that he doesn't have sufficient resources to effectively or if you have a software problem that interferes with the efficient completion of the task (s). Common causes on this discussion:

  1. "antivirus" software from third-party manufacturers
  2. different types of cleaners 'misguided' and other dreck (for example, CleanMyMac, MacKeeper)
  3. trying to run too many processes for the hardware you have.
  4. Insufficient RAM for the processes that you try to run
  5. Hard drive that is too full
  6. CPU or hard drive that is too slow for the software you are trying to run.
  7. hard drive that is running out.

  Download and run Etrecheck http://www.etresoft.com/etrecheck and send the output to an answer here, and we can take a look and see what the problem is.

• What is the small black gauge at the top left of the desktop?

  What is the small black gauge at the top left of the desktop?  I just got my 10 Omni and put in place today. The screen (office) has this stupid black bar (gauge) on what reads 100. I can't move, close or to understand what it does. Can someone help?

  Thank you... sometimes we old guys are a little slower to learn new things

  FayetteTerry

  I spotted your request when it was 1st posted, but I have not experienced the 'phenomenon' myself so I waited for someone who had to post a fix - might save you a few troubleshooting steps...

  If you have already found a solution, update your original post could help direct others to this solution in the future. On the other hand, we can proceed to try a few things to narrow down what is causing this burning "black beast" on the screen of your Tablet:

  Right of sending, no matter the cause - just shut down and then restart your tablet can correct the problem. If the bar persists after that, you can check via the Task Manager to identify a suspect probably under Startup items. Your description suggests a battery gadget or an application that uses the built-in microphone shows the sensitivity of the MIC's setting - possibly Skype or other software 'social media '.

  Please update this thread with your status current re. This issue...

• What is the form of Sun Circle in the upper left corner of the image my friend just send to me?

  What is the form of Sun Circle in the upper left corner of the image my friend just send to me?

  It can refer to live photos. Can you post a screenshot? -AJ

• 2710 m monitor, what is the small circle on the left side of the screen?

  Hey,.

  I was wondering what is the small circle on the left side of the screen? It looks like a light sensor or device or something, its really small. I couldn't find any mention of it in the manual or on the internet, don't know why they wouldn't announce it.

  Here is a picture, the sound at the top left, on the border of the screen.

  http://content.Etilize.com/original/1013714977.jpg

  This is probably a sensor of ambient light that is available on some models. If you put your finger on the monitor changes the brightness? Alternatively, put a flashlight on him the monitor brightness change?

  You should be able to disable the light sensor in the monitor Panel if you want to.

• What does the gold padlock at bottom left of the average of a file icon?

  What does the gold padlock at bottom left of the average of a file icon?

  I found the answer, not obvious at all.

  As above the possession and the permanent don't always hack.

  Here's HOW

  RT-click the folder
  Properties
  Securities
  Advanced (bottom) button

  I assume that you already have around the House - your account name must be it Iif not, do it)

  Highlight the name of your account, for example Chris

  At the bottom of the box there is an option under silence (in all these multiple responses of others)

  CLICK REPLACE ALL PERMISSIONS OBJECT CHILD WITH PERMISSIONS INHERITABLE FROM THIS OBJECT

  It ticks

  Click OK

  and under your eyes, all the gold padlock disappear and the thumbnail of the file becomes visible instead of a white icon.

  VOILA

  I have a great graphics, but can't see a way to download it here, rats!

  Archie
  Scientific fella

• What is the html code to make the horizontal boxes, I need to get some boxes left to right, but all I can find is above the other

  What is the html code to make the horizontal boxes that I do some boxes go from left to right, but all I can find is above the other, you can see an example here car insurance quotes where the boxes are next to each other, and will this affect the page width on my site. Someone told me use DIV tags but how do i put this in HTML code?

  You might be better off using a Table element.  See http://www.w3.org/TR/html401/struct/tables.html

  Steve

• What is the purpose of the checkbox on the left of a section in a form Documaker?

  The migration process of 11.4 Documaker to12.4 and just saw the boxes to the left of the sections listed in a form.

  What is the reason for them?  What are?  What happens if it is not checked?  Once disabled, the section is not displayed in the Studio, but he is out?

  I've highlighted the relevant sections of the Studio Guide documentation below.

  

  

• What is the key for (right arrow) (left arrow) and in hierarchyViewer

  Hello
  11.1.1.5 jdev
  I whant to edit the text in the hierarchy Viewer count
  What is the key for (right arrow), (Arrow), (End) left and (at home) in the Viewer for the counting hierarchy nodes?
  Thank you

  Try

    af_dvt_hv.latNavFirstTooltip = {0}-{1} (Home)
    af_dvt_hv.latNavPrevTooltip = {0}-{1} ({2} Arrow)
    af_dvt_hv.latNavLastTooltip = {0}-{1} (End)
    af_dvt_hv.left = Left
    af_dvt_hv.right = Right
  

  Timo

• What are the two icons to the left of the indicator in the mac mail (arrows and circle)?

  What are the two icons next to the flag in the mail from mac (arrows and circle)?

  I can't understand what they're doing. Thanks for any help!

  If you are referring to the registration of the preview, the arrows appear when you Replied (curved) or transferred (right arrow) by e-mail.

  The circle, when rempli filled in blue, indicates you have not yet opened / read the email.

• What is the red button... "IHELP" surrounded by blue, green, red and yellow in the bottom right of the browser window all about?

  What is the purpose of the red button... "IHELP" in the lower right corner of the browser window? Is there any purpose? So then what? There is no answer if clicked.

  This has happened

  Each time Firefox opened

  No button does not exist by default. This looks like an extension installed in your Firefox, view/disable tools-> Add-ons, Extensions

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• What are the definitions of colors that are triangles of histogram in Lightroom?

  What are the definitions of colors that are triangles of histogram in Lightroom?

  I just got working with the histogram in Lightroom.
  I understand the basic principles and how to apply the settings to eliminate the white triangle and get it to gray when the triangle lights up.

  I notice that the Triangle will both light up in different colors such as:
  Yellow, white, red.
  What do the colours mean?
  Finally, I get to have the gray triangle Tower.
  However: I do the right setting to get to the gray color where one white color other then lights?

  In other words:
  If I change the whites/highlights is that the correct change or should it be exhibition based on a color then other white indicating in the triangle.

  I hope I explained my question properly, ask any follow-up questions if I failed to make the case for the question.
  Thank you

  Greg

  Triangles indicate that one or more channel was cut in the shade (left) or (right) highlights.

  When a channel has been cut, there is no color of this channel - i.e. the value is 0 or 255.

  Edit: Lightroom uses % instead of levels for color values, so are the number 0 or 100%

  red = red channel cut

  Green = green channel cut

  Blue = Blue channel cut

  cyan = green, and blue channels cut

  Magenta = red and blue channels cut

  yellow = the red and green channels cuts

  Gray = all clipped channels

  dark gray only = no Cup channel

  Unless you are working with images for scientific use, I had put the dark and light tones for the most part looking at the picture itself, rather than using the histogram. The histogram tells you a lot about the image in the blink of an eye, but there is no such thing as a histogram "perfect."

  What I usually do is hold the ALT key while dragging the cursor highlights and blacks, which show the cutting in the image itself. I'd rather not have reflections clipped (except for specular highlights) and usually have a little black clipping som real black in the picture.

  How the shadows and highlights of an image depend a lot on the nature of the image and your personal preferences.

  Some images look better without blacks or whites, like the one below.

  

• Our time capsule will blink a light amber and utilities said that it is overheating. What is the problem?

  We had a problem with our (less than 2 years) time capsule - the light yellow flashing, the fan runs often and looking in "utility" on my mac, it says that it is overheating. What is the cause of this?

  The Time Capsule fan runs constantly, so you shouldn't be aware of the fan running on the time Capsule 'often'.

  If you receive a message that the Time Capsule is overheating, there is probably a problem with the internal power supply on the Time Capsule.

  If you have an Apple Store near you, it would be wise to take the time Capsule to let the experts check the issue and discuss your options.