Cursor blinking on startup

Similar Questions

• CURSOR BLINKING WINDOWS XP PROBLEMS

  I have Windows XP Office. I have a master & slave to hard drives. When I start my computer, it displays a black screen with a cursor blinking in the corner. I would normally just re - install XP but I have VERY important information and don't want to lose him. I started it upward and went to recovery but still can not get it back. Y at - it a program or software that I can buy to recover my files? I was told to buy a "cable" that would eliminate the use of the crossing of riders (something that I don't know). Help, please! I'm not a computer pro, then you can use plain English (I know how to cut it on and turn it off)

  Hello

  ·        Remember to make changes to the system?

  ·        Have what measures you tried to solve your problem?

  ·         Have you tried to start in safe mode and check?

  I suggest you to check if the material physical connections are fine and if they are detected in the BIOS.

  I suggest you follow the methods mentioned below.

  Method 1:

  Start in safe mode and check if you are able to see the desktop. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Check if you are able to see the desktop.

  Method 2:

  Check in last known good configuration. Follow the steps mentioned below.

  a. restart the system and then keep tapping F8 until you reach the start menu.

  b. Select last good known in the list and press ENTER.

  Check if you are able to see the desktop.

  Method 3:

  I suggest you follow the steps mentioned in the article below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 4:

  If this does not help, then I suggest do you a system restore recovery and audit. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I have no cursor blinking in the box where I type

  I have no cursor blinking in the box where I type. If I start typing the whole box moves to the top of the page and you can tap into it then.

  Post a URL to the site, thanks.

• Cursor blinks so bad that it is very difficult to choose anything

  On each web page, the cursor blinks in and out so bad that it is difficult and sometimes impossible to choose anything - button, checkbox, no matter.

  And, with regard to the information pasted below, I doesn't not change or update your preferences. I just had 2 modules disabled during the installation of the new version of the browser.

  Thank you very much! I closed Firefox and then reopened and the flicker is no longer here. However, I'm featuring your email in case it happens again and is not easily resolved.

• I know not how, but in recent weeks, I can see the "cursor" blink when ever I click on the Web page... I tried to reinstall did not help!

  the cursor blink

  Press F7 to disable the keyboard navigation.

  http://KB.mozillazine.org/accessibility.browsewithcaret

• Satellite Pro C660 - black screen and a cursor flashing during startup

  When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

  The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

  Need help. Thank you.

  I think that your HARD drive is dead.
  You need to replace the HARD drive with a new 2.5 SATA HDD.
  Replace the HARD drive and install the OS by using Toshiba recovery disc.
  I hope you ve created one in the past

• How can I change the cursor blink rate? Firefox 3.6.10 on Ubuntu.

  How can I change the cursor blink rate? Firefox 3.6.10 on Ubuntu.

  See this old thread forum mozillaZine on this subject:

  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 865895

  (please don't post in these old threads)

  See also:

  • http://KB.mozillazine.org/about:config

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Qosmio G10-166 - the cursor blink, but I can't do anything

  I received a G10-166 with a broken power connector. The laptop had no disks or a battery, I made a temporary solution and the portable lights only problem is that after the load screen where its Qosmio, then said to the screen where the icons are the following has letters everywhere. I can see the cursor blinking, but I can't do anything with it.

  I tried to access the page of the BIOS pressing F1 but nothing just this screen with the strange letters on it. Also I don't know the history of the laptop so any ideas what is wrong I want to get the job of the laptop?

  Hello

  You can access the BIOS if you press ESC I n know why you try F1?

  You have installed a new HARD drive now? If so, you should check if the HARD drive is recognized correctly in the BIOS. If so, you can start with the installation of the driver because the new hard drives are empty then the cursor blinks and nothing happens.

  Simplest is that you use the Toshiba recovery disc because it contains an image of the settings from the factory with all the drivers and tools. Just follow the instructions of scree and Windows will be reinstalled.
  Alternative, you can also take a Microsoft Windows disk, but you will need to download and install all the drivers step by step.

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Black screen with cursor blinking on HP Pavilion dv6z-3100 CTO Entertainment Notebook PC

  I have a HP Pavilion dv6z-3100 CTO Entertainment Notebook PC that I bought in 2010 and recently my brother was messing around with it and wiped the whole pc now im unable to use it because when I turn it on after one so that it displays a black screen with a cursor blinking (the typing cursor) and I don't have any recovery disk is a drive that I can use it to restore my computer for example a windows 7 64 b + supp 2 recovery?

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• The constant cursor blink

  Separated from this thread.

  I tried the fixes that have been listed for this problem (mainly involving changing default printer) and no permit.  I have a 4 1/2 years, Fujitsu lifebook and Windows 7 with Office 2013.  The cursor blink is constant.  Happens no matter what program I am. It happens on the desktop. Happens to the word & Powerpoint. Right now, I'm watching come in Firefox. My default printer is about to OneNote.  Changing default printers has not helped at all.  I even deleted all other printers and restarted. Always the same.

  Is there a chance that this is caused by a Windows Update?  It seemed to start after that I not let install some automatic updates.

  Help!

  [Moderator note: divided from a thread of Microsoft Office; moved to Windows]

  I tried the fixes that have been listed for this problem (mainly involving changing default printer) and no permit.  I have a 4 1/2 years, Fujitsu lifebook and Windows 7 with Office 2013.  The cursor blink is constant.  Happens no matter what program I am. It happens on the desktop. Happens to the word & Powerpoint. Right now, I'm watching come in Firefox. My default printer is about to OneNote.  Changing default printers has not helped at all.  I even deleted all other printers and restarted. Always the same.

  Is there a chance that this is caused by a Windows Update?  It seemed to start after that I not let install some automatic updates.

  You see that in any document, it is unlikely to be related to Office. Try to go back to a previous restore point and see if that helps.

• Crash suddenly and cursor flashing at startup...

  I have a R4 Aurora and was playing a game when it turns off suddenly and seem stuck in trying to restart. I disconnected and after a little plugged back in and tried to restart. The screen will display the Alienware logo and then switch to a blank screen with a cursor blinking in the upper left. The lights will turn on using the theme I chose.

  Any help will be very appreciated!

  Hey Naomi.

  I am very happy to say after rerun the test of HARD drive he came back OK.  Then followed all the instructions on the conduct of a pure install video drivers and install the video drivers Alienware. Computer nice race!

  I also discovered after using Sestem Detect I was behind on a few other drivers, chipset and others and will update this weekend.

  I really appreciate all the time and you provided a huge hug to help me! 

  Take care...

  WISPR

• Cursor missing at startup

  Currently running OS X El Capitan, and have noticed recently that from time to time at startup that my mouse cursor disappears completely – making it impossible to click on anything whatsoever

  Any ideas on how to solve this problem? The keyboard works fine and the connection, the cursor jumps back as usual.

  in some rare cases, I have the same problem on the logon screen.

  Try to select your personal account with the arrow keys, and then click the back button.

  When I do that, finally on the desktop, the mouse cursor appears.

  Greetings from the Germany

  Chris

• Black screen with cursor during windows startup

  Hello

  After a recent McAfee virus scan update, it asked me to restart my computer. After restarting, I can't have a black screen with the cursor in the middle.

  I have tried pressing F8 on startup to the top:

  Repair your computer (System or Startup Repair restoration) - this does not seem to solve the problem

  I tried pressing ctrl-alt-del and SHIFT 5 times on the black screen. This does nothing.

  The laptop does not work in safe mode.

  You have any ideas how I might solve this problem?

  Thank you

  Chris

  After a recent McAfee virus scan update, it asked me to restart my computer. After restarting, I can't have a black screen with the cursor in the middle.

  First of all, see http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Because the phenomenon is associated with an update of McAfee, not a Windows Update, contact technical support of McAfee or post in the appropriate forum of community McAfee for assistance: http://community.mcafee.com/community/home ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft