What is this suitcase, looking for symbol in the gray area of Safari

Similar Questions

• I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  Please see this link

  Non profits

  If your institution not-for-profit or charity meets the conditions above, you can browse the education of Adobe software versions. Once you are ready to buy, you will be asked to present evidence or your qualification status when ordering.

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• I'm looking for documentation on the Firefox command line arguments.

  I'm looking for documentation on the Firefox command line arguments. I use Ubuntu.

  http://KB.mozillazine.org/Command_line_arguments

  This doesn't seem to be what you're looking for?

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• SHARED-UNKNOWN-ERROR: 22-What does this mean? can not post the site that this error when I try.

  SHARED-UNKNOWN-ERROR: 22-What does this mean? can not post the site that this error when I try.

  Hello

  Please sign of Muse and identify yourself again and try to publish.

  You have the option of disconnecting help > Sign Out

  In the case that do not fix the issue made me know.

  Concerning

  Vivek

• I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  A scanned document is an image; You can't find a picture.

  If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).

  OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.

  To run OCR inline in a PDF document, you will need Acrobat.

• Looking for help with the motion in still menus of EI.

  Need help to make a menu driven sequelae. can understand the import process in yet. I can't the buttons I did in AE to work. Anyone?

  Read this (but do not have your plan until you read the link at the end of the post):

  http://help.Adobe.com/en_US/Encore/CS/using/WSF49EA5DB-3743-49C2-9831-F66328B192F8.html

  The important part is:

  «The loop point is used first to disable the buttons.» Until the loop is reached, the Viewer cannot select or activate a button. The menu returns to this point on each repetition, so the buttons are disabled when the menu is displayed first. For rehearsals, the duration is shorter and the starting point for all video content in the menu is offset. »

  So in AE, you create a video (the substance of the application) which includes the image of the buttons as they fly in. Still is the addition of highlights. AE for a period of time could also create layers of button, but you will be less confused if you use Photoshop and again for the file menu itself.

  I forgot to give you this link for help, which is the help file to work with AE:

  http://help.Adobe.com/en_US/Encore/CS/using/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

  This method begins with a menu into Encore and creates an AE composition from there. It can only work with AE CS6, since you have EN CS6. I don't remember if it is technically a form of dynamic link, which requires corresponding versions of the applications.

  There are a lot of ways to skin this cat.

• I'm filling out a form to transfer license for Adobe Acrobat Pro XI who is transferred to another employee in our company for me. The instructions are the form indicate to attach to a file number. How can I get a case number?

  I'm filling out a form to transfer license for Adobe Acrobat Pro XI who is transferred to another employee in our company for me. The instructions are the form indicate to attach to a file number. How can I get a case number?

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

• Should what configuration of iMac I look for to achieve the app development?

  Looking for ideas on cost-effective configuration of office people as for application developers.

  Current processors and disk capacity will be OK for pretty much anything - you'll be happier with more memory and large screens.

• Looking for hope in the restoration of my iMac

  My iMac HD has failed, and I took it to Apple to get it replaced. I had a Time Machine backup on an external hard drive Seagate. But my iMac just not see the backup drive Seagate. I don't know if there is a trick to getting the Seagate HD displays. It does not show in Finder or in disk utility. But when the iMac HD was not, and I looked for ways to restore, I saw a Time Machine backup date. Now, I can not see the drive. Even though I have the music and pictures stored in iCloud, all my apps are now gone. I don't know where to start. I was a fool to trust Time Machine? This is literally disastrous for me, and I don't know where to start. What I need, is to see this backup disk somewhere BTW, I plugged on another iMac and he did not see it either. Is there some magic for Seagate HD?

  Some things you can try:

  * Open the Finder preferences (under the Finder menu, top left of your screen). Make sure that on the general tab, the boxes are ticked for hard disks and drives, to show them on your desktop. Otherwise, they won't be visible.

  * Try a new cable. The cable went wrong.

  * Open disk utility when the drive is connected. You can see on the left hand side of the disk utility? If you see an external drive, try to mount in disk utility. If you can ride, the files are available? If this isn't the case, you can run disk utility to try to fix it.

  * Seagate's data recovery services.  http://www.Seagate.com/services-software/recover/ first of all, you can download their software and try it for free. If it can find files on the disk, you can then purchase the license of their recovery software to use to recover your files from the Seagate drive. Alternatively, he can perform the data recovery for you (with supplement). The details are at this link.

  I'm sorry it happened, I wish you good luck.  It seems that your problem could not Time Machine, which is actually a very good backup program; but rather, your external drive seems to have a problem. This happens to all readers subsequently, no last forever and that's why I try to keep at least two backups, each with a different method. For example, one with Time Machine, the other using software such as "clone" (such as SuperDuper, CCC etc.). It is good that you use the cloud at least. I hope that you can recover your files.

• Looking for set up the NI 9233 module, well through which bus?

  I'm a bit new to conducting analysis of vibration at high speed... I see a ton of information on the programming side of things software, although my main concern now is getting the correct 1st place material.

  Right now my apron for the acquisition of data consists of the following: 1) a main office or a laptop with a LabVIEWsoftware platform that integrates a live view of bench test-data acquisition & control, as well as analyses of multiple entries of aircraft during and after the test.  Joined this office/computer laptop peripheral multiples are the following:

  1) dedicated output options control & daq device with 2 semi-PLC data: a) medium... Data USB 1 sample per second... it is for read-only purposes, & b) CAN input/output... 10 samples per second output of data and allows a command input from the desktop/laptop via a CAN of NOR-8473 USB converter.

  (2) NI DAQ hardware entered via MAX configuration.

  My main concern is that I don't want to create a bottleneck for the input of vibration DAQ data.  If I'm looking for a sampling up to 5 000 samples per second max and 200 samples per second minimum for vibration analysis, will I be able to get this amount of data per second using the NI 9233 module through the USB configuration?  I have several USB devices connected to the desktop/laptop PC computer (such as the other USB DAQ modules input/output) will limit these the input of the speed of the NOR-9233 module?

  My next concern is to know how to set up my present VI during the execution taking all the entries data acquisition (which some 1-sample per second, others to 10 samples per second)... when I start taking at a sampling frequency of 5 kHz for the diagnosis of vibration, to, I just average on the other zeros that will be read from other devices?  And then I'll most likely need to add another temporal loop controlled to allow only once 4 / per second output outside remote so no timeout for this device.

  What would be more efficicent this setup for the 9233 module that I could use in a satisfactory manner?  USB, PXI, CRIO?

  Also, is the Sound & Vibration Analysis toolkit useful?  I didn't check yet but it it has a cost of deployment for each executable?

  Thank you.

  I thiink you'll be suprrised with high speed USB features.  For example, when we went out first with CompactDAQ, we put 8 the 9233 modules in a chassis and down them to full (32 channels at 50kSA/sec).

  If you have a laptop dual core, with good USB 2.0 ports, you can use a port for the USB - CAN (which is relatively slower), the PLC is a slow sweep (100 Hz or more) and then a Compact DAQ chassis for all your stuff really high speed, you should be fine.

  It is difficult to reference without having the full application.  My experience suggests all data enter the PC will be the easy part.  How you manage and analyze the data will determine how much control you are able to do.

• CONFUSION ON WHAT IS THIS LAPTOP IN ORDER TO GET THE CORRECT CHIP SOUND DRIVER

  THE BACKGROUND OF THIS LAPTOP SAYSIT IS:

  PRODUCT: HP PAVILION dv 1000

  SN #[personal information]

  PN # PM054UA #ABA

  NOW, WHEN I PUT IN THE PN # IT SHOWS

  HP Pavilion dv1040us PC drivers

  IT IS POSSIBLE THAT IT WAS BUILT AT THE TIME OF THIS CHANGE.  FOR THE 1000 SOUND DRIVER DOES NOT CHANGE AND THERE IS NO SOUND BY HARMAN/KARDON BUILT-IN OR HEADPHONES.

  IT OF MAYBE A BURNED ON THE CHIP AND IF SO WHAT SOFTWARE CAN I USE TO TEST THIS SITUATION?

  I HAVE TRIED EVERYTHING I KNOW AND AM OPEN TO SUGGESTIONS.  I HAVE LUCK, USE THE DRIVERS FOR THE 1040?

  THANK SOMEONE FOR SUGGESTIONS.  J

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/us-en/document/c00247186

  Yes, it's a dv1040us and its product number is PM054UA #ABA. TIS must be very old machine because I can't find more than:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=433749

  For her, please try Conexant CX20468-31 AC97 Audio Driver:

  http://ftp.HP.com/pub/SoftPaq/sp28001-28500/sp28481.exe

  Kind regards.

• Looking for location of the thermal sensors on r61i

  Hi all

  My r61i 7650 (EGG) - previous with win7 as now with ubuntu 10.04 - used to start the fan early and kept running most of the time when I was intense (for example virtulalizing win7 as a guest).

  In order to have less noise, I tried tp fan control and it works great, but I wonder what temperatures to choose to 'wake up' the fan. The problem is that I know the temperature which places and which hardware sensors measure. And, what is more, I don't know, for example how hot that my gpu or anyone is allowed to become.

  In tp, fan control are listed following sensors:

  Sensor 0 - I think it is the cpu (the hottest part)

  Sensor 1

  Sensor 4

  Sensor 6

  Sensor 8

  Sensor 9

  10 sensor

  Of course, I'm looking for sound values to do not risk damage, but I do not accept the fan from when the cpu is at 35 ° C warm... ;-)

  I searched for information at thinkwiki, wiki.ubuntuusers, but did not find so many useful information for a _r_61 and google was not my friend...

  Any help appreciated

  see you soon

  Michael

  Do Lenovo release these figures of thermal tolerance. However, 53 degrees are in the temperature interval. I run my R61 at these temperatures a lot for a few months, when I left it on doing some computation intensive matlab of CPU on my laptop R61.

  Personally do not let the temperature exceeds 60 degrees for too long.

  Lenovo puts a lot of R & D in the thermal management thinkpads and tolerances.

• You are looking for assistance on the use of CSV with InDesign files for merges data...

  Hello

  Please forgive me if this has been discussed in this forum already. If so, please point me to this discussion.

  What I'm trying to do, it's a data merge InDesign with a (CSV) file delimited by commas. I created the CSV file by using the command "SaveAs CSV" with Office Excel 2013. The problem I have is with records that contain multiple lines in the same area. After reviewing the merged InDesign document, I noticed that the results are inaccurate for the rest of this record. When it gets to the record following some fields are filled with the remaining records of the previous record.

  I'm sorry if I'm not explaining this very well, but the results are strange and I hope others have similar results and can offer a solution.

  Thank you

  Greg

  You can't have line breaks in a cell. The solution is to use a code for the break, and then run find/replace after the merger to change the code to break you.