What kind of pl sql questions can you expect for a customer technical interview

Similar Questions

• What kind of Web services we can consume using Oracle integrated SOA gateway (REST/SOAP).

  Hello

  Someone can let me know what kind of Web services, we can consume using bridge Oracle SOA that is integrated (type Type REST or SOAP).

  Thank you

  -Vijay G

  Hello
  Using the Version of the EBS: R12.1.3

  .

  I found also that before R12.2.4 it only supports SOAP Web services and R12.2.4 supports both SOAP and REST.

  Thank you

  -Vijay

• What kind of virus won't prevent you to connect to the internet and how do I get rid of him?

  Having been on my computer for hours very well, I left to pick up my girls from school, and my window was open to yahoo.  When I came back, the computer was off.  I tried to turn it back on and it wouldn't do anything.  the fire came, but it never came.  After you play with it for a bit, I finally managed to do turn it on, but it does nothing else.  I can't get into all programs and I can't connect to the internet.  After a few fault-finding with cox for more than an hour, they determined that I have a virus.  What kind of virus can put your computer completely out of use and how do I get rid of him?

  Hello

  stops a lot of malware connect to the net

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I used to have "app tabs" and it has now disappeared. I recently upgraded to Firefox & I also changed the skin. What can you suggest for me?

  How can I get that back?

  You could try story ('Alt + S') > "Restore preivous session", then also of the story then 'restore Windows' > 'restore all windows.

  You get back them or re-create them, I would suggest that you save all in a folder of bookmarks for your restore them immediately and pin them each, or altogether if you have the extension «Multiple Tab Handler»

  Although I don't have a problem with them disappear when I run Firefox, they have always seemed like a potential problem over time. I use them, but I often start their from a folder Favorites so are 'clean' only one page by app - tab.

  • App-tabs https://support.mozilla.com/questions/837562
  • App-tabs https://support.mozilla.com/questions/840004
  • App-tabs closing bad use history to restore
    https://support.Mozilla.com/questions/840583

• Extra-debutant Question: Can you get a PrintLn program?

  In other words, can I get a program for the release of its status in real time, like this:
  http://img269.imageshack.us/img269/4354/outputexample.PNG
  
  I know you can do this with Netbeans, but my thin client doesn't have enough room for it. Y at - it a simple java utility that does the same thing?
  
  Thanks for reading.

  NetBeans just past (Apache) Ant (3 MB or so if you do not include the documentation) so you can try see if that fits and run it from the command line. If it isn't you need to run javac/java from the command line yourself.

• Web Architecture Question - can you do this?

  I have an application that uses cookies and client variable for process/track user activity in a cluster server environment. Basically, a user is able to see a client at a time and each client has its own database.  I know that if you have multiple accouts email Hotmail, Yahoo, etc., you can access time in the same way.

  BUT I wonder if there is a way for the user to access several customers at the "same time", which means, a browser page customer is A, a browser page customer is B, a browser page customer is C, etc.  If the user has access to the right to all clients, logically he can open any two or more customers and its CRUD.

  Can this be achieved?

  Thank you

  There are two ways you could do this:

  1. Or you pass the CFID and CFTOKEN autour in the URL instead of the cookie and specify the instance of 'customer' in the CUSTOMER or SESSION scope. I wouldn't want to, recommend this method because it makes so much so much so much easier hijacking sessions.
  2. Keep the CFID and CFTOKEN in the cookie are they belong.  Pass around a variable in the URL specifying the instance of the client.  Then you should also encrypt the variable or pass around a hash with it. (hash and use the CFID and a secret key in the form of salt)

• Server Windows 2008 R2 - can you use for a single user remote desktop after the initial 120-day grace period?

  I installed Windows Server 2008 R2.  During the 1st 120 days, remote desktop worked for multiple users.  Now that the 120 days are up, it is necessary to purchase client access licenses.  However, is it possible to activate the remote desktop for one user without having to purchase client access licenses?  If so, I would like to ask for details.  I've been everywhere in the server options and can't seem to find the right combination.  Thank you!

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps.

• Application for Managing Director - question when you register for the first time

  Dear support team,

  I would kindly ask help you with the following problem, then registration application Managing Director first appears.

  CCO ID dtekaccount10

  Contract 95266947

  Serial number FOX1415GLAZ

  Problem illustrated - encountered us an error while processing your request... (screenshot attached).

  CCO ID has the access rights to the 95266947 contract. Contract is valid. Serial number is covered by this contract. So, I'm not all questions why this issue may occur.

  Please help what to do in order to get the registered delegate administrator.

  Hello

  This problem should be solved. Kindly try to re-register and to reply to this message if you are still having problems.

  Thank you!

• What kind of micro sd card should I buy for an android Tablet?

  The class is important, (2,4,6 or 10)?  I'm looking to get a 32 GB. I know that this question does not apply to windows, but I always answer that I need here. Thank you

  Depends on what your computers card reader can read if you want one that you can insert into an existing card slot.

• With the help of a Bank of questions can I ask for a new attempt to a question if the user gets hurt first time

  What I want to do is-

  The learner is asked a question from a Bank of questions - the questions are all the short answer questions (all are numeric responses only)

  If the learner type the right answer - all good and learning proceeds to the next question in the question Bank and is awarded 1 point.

  If the learner Gets the wrong answer, I want the learner to be presented at the same issue, but now the learner has a multiple choice question/answer.  This response has 1/2 a point if it is correct. Learner proceeds to the question in the question bank.

  If the learner chooses the wrong multiple choice answer as they are reset to 0 (zero) points and proceed to the next question in the question bank.

  Is the highest possible or am I being too adventurous, with a Bank of questions?

  I guess I'm looking to give to the student a second chance and try again the question however provide a different format for their response

  I am using Captivate 8

  Thank you

  Question banks do not give you this level of control.  If your questions were NOT in a Bank of questions you can use advanced Actions to redirect your learners to a slide of specific question based on their response.  But you can't do that with question pools.

• How can you "Invisible", for example "System Volume Information", or "Content.IE5", files be read?

  I have entered in Options files and "Show the hidden files and folders", the value erased "Hide protected operating system files" (and confirmed the potential danger in the pop - up window by changing the files of this type). The problem is, all the programs and questionable scripts see have no problem modifying files that are located in these folders, or using them as a repository for their own excrement.

  I suspect that, because even the unsophisticated malware infections can bypass this 'protection', it is not a block of real access to NTFS.  It's just an arbitrary thing to prevent "the user", which certainly is not always the best judgment. (They buy and place important information about a system designed to be as open to the 'hacking' than that of Windows.)

  Utilities offline, as in recovery, will be able to view them?

  The System Volume Information folder is where system restore points are saved.  As a general rule, you can erase it by disabling the function system restore, reboot, then turn it back on again.
  (Right click on 'My Computer'-> properties-> tab "System Restore").

  If you absolutely have to dwell there, see the following article:

  "Access to the System Volume Information folder"
    <>http://support.Microsoft.com/kb/309531 >

  but do not forget that the locker room apply here (i.e. watch all you want, but do not touch anything).

  -JW

• In your own words, can you describe for me how networks work at home.

  need help on a project for school.

  A home network is basically a method for multiple computers to communicate with each other. If you have two or more computers in your home, a network can let share files, an internet connection, printers, scanner and other devices. Different network types use different hardware, but they have all the same essential components: more than a computer, the hardware (like a router( ) and the software (either built the operating system or as a separate application) to coordinate the exchange of information and path for information to follow from one computer to another

  ­

  ­

  ­­­

• Can you pay for 2 apps in CC I just want of AE and Premiere Pro

  I just want to use AE and Premiere Pro with adobe CC and didn't really care about the other applications. I was wondering if I could pay just for those and not other applications. Thank you!

  Yes, you can get two subscriptions for individual applications.  Choose individuals-> unique App and every product in the menu drop-down to see the price for each of them in your local currency / price...

  Creative cloud plans

  https://creative.Adobe.com/plans

• Can you record for an object of TYPE input COLLECTION and use it as a table?

  My PL/SQL stored procedure creates a list of employee number and phone record numbers. I don't want to store them in a table. I will pass this list from one procedure to another in my package.
  
  I created the type (folder) and type of collection (table) using this statement.
  

  CREATE TYPE obj_emp_phone_rec AS OBJECT
    (
       emp_number   NUMBER,
       emp_phone    VARCHAR2(100)
    )
  /
  
  CREATE TYPE obj_emp_phone_recs_table AS TABLE OF obj_emp_phone_rec
  /

  Thing is, can I use the obj_emp_phone_recs_table 'table type' as an array?
  
  I.e. can I insert records that in the procedure of package and pass reference to him in called secondary procedures.
  
  that is something like that
  

  PACKAGE BODY abc IS
  
    PROCEDURE kdkddk IS
    BEGIN
      -- Insert records to the  obj_emp_phone_recs_table 
      obj_emp_phone_recs_table(1).emp_number := '1';
      obj_emp_phone_recs_table(1).emp_phone   := '0774949494';
  
      obj_emp_phone_recs_table(2).emp_number := '234';
      obj_emp_phone_recs_table(2).emp_phone   := '285494';
  
      -- Pass the table to the sub procedure
      xyx(obj_emp_phone_recs_table);
  
      ........
      ......    
     
    END kdkddk;
  
  END abc;

  If yes how to insert the obj_emp_phone_recs_table?
  
  Nothing on the net. In the Net I found only where u set normal column of a table as an object type and then insert records him.
  
  Any help would be greatly appreciated.
  
  Published by: user12240205 on October 6, 2011 02:08

  mhouri > drop type obj_emp_phone_recs_table;
  
  Type dropped.
  
  mhouri > drop type obj_emp_phone_rec ;
  
  Type dropped.
  
  mhouri > CREATE TYPE obj_emp_phone_rec AS OBJECT
    2    (
    3       emp_number   NUMBER,
    4       emp_phone    VARCHAR2(100)
    5    )
    6  /
  
  Type created.
  
  mhouri > CREATE TYPE obj_emp_phone_recs_table AS TABLE OF obj_emp_phone_rec
    2  /
  
  Type created.
  
  mhouri > create or replace procedure p1(pin_tab IN obj_emp_phone_recs_table)
    2  is
    3   begin
    4     for j in 1..pin_tab.count
    5     loop
    6      dbms_output.put_line('record number '||j ||'-- emp number --'||pin_tab(j).emp_number);
    7     end loop;
    8
    9  end p1;
   10  /
  
  Procedure created.
  
  mhouri > create or replace procedure p2
    2  is
    3  lin_tab  obj_emp_phone_recs_table := obj_emp_phone_recs_table();
    4  begin
    5  FOR i IN 1 .. 5
    6     LOOP
    7        lin_tab.extend;
    8        lin_tab(i) := obj_emp_phone_rec(i, 'i-i-i');
    9     END LOOP;
   10
   11    p1(lin_tab);
   12
   13  end p2;
   14  /
  
  Procedure created.
  
  mhouri > set serveroutput on
  mhouri > exec p2
  record number 1-- emp number -- 1
  record number 2-- emp number --2
  record number 3-- emp number --3
  record number 4-- emp number --4
  record number 5-- emp number --5                                                                                                                                                                                                                          
  
  PL/SQL procedure successfully completed.
  

  Best regards

  Mohamed Houri

• What the DPI value is used when you export for the screen?

  I understand the role of PPI for export of images that could be used for printing (in applications other than Lightroom).  But the value does nothing for the images you want to export to display on computer screens?  Lightroom apply sharpening differently according to what the PPI came in, even for the exports of the screen?

  Nothing.