What line has been activated in a (updated report) SQL query?

Similar Questions

• (Updated report) SQL query - may not know how to make one

  Hi people,
  
  Can someone tell me how to make a report where the data can be updated? Not an interactive report, SQL report that selects a single row. The only options in the menu dropdown I see are "SQL query" and 'SQL Query (body of function from PL/SQL returning SQL query)', but I have a report elsewhere that says: this type are "SQL Query (updated report)", but I do not remember how :(
  
  Thank you very much
  
  -Adam

  Hi Adam,.

  An updated report is a 'tabular form' - see: http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/frm_tabular.htm#CHDFBHDB

  Andy

• (Updated report) SQL query

  Is it possible to convert an existing SQL query report area to an "application SQL (editable report)? If not, where should we do to create a SQL (editable report) region?

  I had the same problem.

  The way I ended up converting my sql to a (editable report) SQL query was:

  Create a new page with the type of form and tabular presentation, run through all the steps required Wizard.

  Once done, you can go back and modify the report and paste in your original sql code.

  Worked for me.

  It will be useful.

  Jen

  Published by: munsej on August 7, 2009 08:42

• I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  I noticed that my remote access has been activated twice in a week but I did not. no way to verify when, what, who activated via the event log,...?

  Hi dewthisnow,

  The information office for remote access must be in the security log.

  For more information, see:

  To disable remote desktop

  To view the logs in Event Viewer, see:

  Using the event viewer        

  Procedure to view and manage event logs in Event Viewer in Windows XP

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• How will I know if a product key for xp has been activated yet

  Hi I recently bought a copy of windows xp pro and what he was going to install on my laptop that I'm on vista, it is an authentic copy from what I understand, but before starting the installation, I need to know if the product key has been activated yet, is it possible to tell? Thank you all

  Simply call Microsoft on the toll free number: 1800-936-5700.

  Give them the product key, and they will tell you if it has been used for activation aldready and if it has been blocked.

  Also give them the part number of the Windows XP disk and they will tell you if what drive it is. (OEM, retail). and they can also tell you if the product key will match and work with the disk.

  Do that before you start the installation, train them if the disk and product key do not match, you will be stuck.

• How do I know when my computer sercurity as compromised and what attempt has been made to the hac, a system?

  How do I know when my computer sercurity as compromised and what attempt has been made to the hac, a system?

  Hello.

  You know when you have been infected by malware:

  1. your security programs will not open either, will not scan or will not update.

  2. When you are in your Web browser, you are redirected either or you receive a lot of pop ups.

  3. your computer may slow down or freeze.

  4. you can not access the Internet.

  5 and follow the advice of Richard G. Harper:

  http://www.bing.com/
  http://www.Google.com/

  Or see your lesson, manual materials or other resources in the classroom.

  Examples of Google:

  http://answers.Yahoo.com/question/index?QID=20080405053727AAdKagd

  http://www.computerhope.com/issues/ch001296.htm

  http://www.ehow.com/how_4851647_computer-hacked.html

  http://www.WikiHow.com/know-if-your-computer-has-been-tracked

  See you soon.

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista... It has been activated?

  Before windows 7 came out, there was an offer of full OEM Vista + windows upgrade 7.  I upgraded to 7 directly from XP and installed vista a few hours one afternoon.  I don't think I've enabled, but is it possible to check whether it has been activated or not?

  You need to install an operating system if the license has been activated.

  Here are the terms of the offer to upgrade to Windows 7.
  This offer was made to those who bought and had Vista installed.

  "

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to the editions of Windows Vista Home Premium, Business and Ultimate. Update your Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option. »

  Mick Murphy - Microsoft partner

• How do I know if my windows has been activated

  I installed my copy of windows 7.i have also received message "your windows has been activated successfully" when I was reviewing. Tell me what are the other ways to know that my windows is genuine and active? Another allows my fraudulantly product key?

  Astrid

  How to tell if Windows is activated?
  http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-Windows-is-activated

  Not so much a do not give it/post to any forum or send it by e-mail. Anyone who uses your computer can also see your product key.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Can I find out if a prepaid Xbox Live card has been activated or is used?

  Separated from this thread.

  is there anyway you can find out if paid a Xbox live card has been activated or is used? Need help

  Sorry, Xbox only is not supported here in the community.

  Try Xbox support

  https://support.Xbox.com/en-us/

  or

  The Xbox community forums

  http://forums.Xbox.com/default.aspx

  Don

• Windows defender is stopped. whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  Windows Defender is disabled whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  If you have Microsoft Security Essentials or AVG installed, you don't have to do a thing. These 2 are supposed to disable Windows Defender, because they have their own "defender". Running two defenders would conflict on the other and redundant.

  If you have not installed 2 above. Try this...
  Start bittun > in the search box, type services > press ENTER > uac prompt > scroll down and look for Windows Defender...
  under the State ; It must be said Started
  under Startup type : must say automatic
  If this isn't the case, right click on Windows Defender > properties >
  under the change of automatic startup type to
  under service status to start editing
  Click OK.

  t-4-2

• I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I do not think that information... Adobe titles represent the only link I know following your accounts, but not where the programs are installed

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

• How do I know what swf has been loaded?

  I'm trying to load an external SWF files piles in a tile list. Once sovereign wealth funds have been loaded I'm adding them to a dataprovider I have then sort and add to the tilelist. As follows:

  dp.addItem ({label: e.currentTarget.content.getLabel (), path:e.currentTarget.content.getPath (), source: e.currentTarget.content, cost:e.currentTarget.content.getCost (), category:e.currentTarget.content.getCategory()});})

  It works fine except that the way that I do, I have to add a bunch of functions for each swf to know who is responsible and send the correct information for the dataprovider. Is there another way to say what swf has been loaded? Something like that. URLRequest. If I could say something about that I could compare this to my original xml and discover all of the other information that I need for my dataprovider.

  If you use the loader to load SWF files, you may check e.contentLoaderInfo.url to see what swf's

• How to make reference to what has been activated in a TileList using an ItemRenderer

  Hello

  I have a Tilelist component and I use an ItemRenderer, which is a button.

  I do not understand how to refer to what the user has clicked. So, if the first tile (which is the first Explorer) is checked, how can I know that that an individual has been clicked.

  < mx:TileList

      id ="myTL"

  dataProvider="{myAC}"

  Width="400"

  Height="400"

  ='2' columnCount

  number of lines='2' / >

  < mx:ArrayCollection id="myAC">

  < mx:Array >

      <mx:Object id="first" label="1" />

      < mx:Object label="2" / >

      < mx:Object label="3" / >

      < mx:Object label="4" / >

  < / mx:Array >

  < / mx:ArrayCollection >

  ItemRenderer:

  "" < mx:Button xmlns:mx = "http://www.adobe.com/2006/mxml"

  Click = "Alert.Show ("this was clicked') '> "

  < mx:Script >

  <! [CDATA]

  import mx.controls.Alert;

  ]]>

  < / mx:Script >

  < / mx:Button >

  Thank you.
  -Laxmidi

  Hi Laxmidi,

  Using the itemClick event you can do this by using the event object. See the code example below:

  <>

  xmlns:MX ="http://www.adobe.com/2006/mxml" > ".

  Import mx.events.ListEvent;

  Import mx.controls.List;

  Import mx.controls.Alert;

  Import mx.events.ItemClickEvent;

  private function onItemClick(event:ListEvent):void

  {

  var strAlert:String = "line of the Index Clicked element:" + event.rowIndex + "\n"; "."

  strAlert +=

  ' Column Index Clicked element: " + event.columnIndex + "\n";". "

  Alert.Show (strAlert);

  }

  ]]>

  Click = "http://www.adobe.com/2006/MXML Alert.show" ( 'It was clicked') ">"

  Import mx.controls.Alert;

  ]]>

  You can also try this by writing the Click event on the button in the TileList as itemRenderer where you can easily access the itemClicked data easily using the data object.

  Thank you

  Jean Claude