What memory you choose for Satellite P10-304

Similar Questions

• Need drivers for Satellite P10-304

  Hi all

  I was wandering if someone could point me in the right direction.

  I bought a second hand satellite P10-304, had to replace the hard drive and operating system and now need drivers. Unfortunately the P10-304 model doesn't seem to be on the list of drivers.

  If someone could let me know what letter it is or it is a pro, etc, I would be very grateful.

  Thanks in advance

  Steverino

  Hello

  All drivers for older models of laptops you can find under http://eu.computers.toshiba-europe.com > support & downloads. But please, under product type choose ARCHIVE. In the lower corner you can find the label with the exact model number. This model number must be set to download under Model No short option page.

  If you have any other questions please post again.

  Bye and good luck!

• Need new HDD for Satellite P10-304

  Hi guys.

  Does anyone know where I can buy a hard drive for the laptop above to reinstall complete

  Current hard drive is officially dead!

  Concerning

  Paul

  Hello

  I found some info on the HDD on Satellite P10:

  It can be used a 2.5 ", 9.5 mm hard disk with capacity of 30 GB / 40 GB / 60 GB / 80 GB

  -Master - IDE bus
  -9.5 mm, 2.5 HARD drive carrier
  -Support synchronous Ultra DMA 100

  So for your laptop you can buy IDE HDD up to 80 GB of capacity.

  I think you can buy it everywhere. In PC Magazine, online electronic store, eBay...

• What material you choose for a new server

  Hello everyone.

  I intend to set up a new server at home, mainly for use with ESXi 4, but perhaps also use it (with a different, without the use of ESXi HARD disk) as video occasional treatment / game machine.

  My main concern at the moment is the part of the equation ESXi. The plan is to have no more than 10 virtual machines running simultaneously (a mixture of servers windows and linux workstations, windows) for development and testing. I'm not under a Bank, so it is not crucial for the system until 24 x 7, but I need a fast and reliable system to work with (as inexpensive as possible though). I searched around for the material, but I must say that I am a bit confused. I am open to proposals from scratch, but here's what I've found so far and the questions I have.

  1. a single i5 or i7 processor will be enough? How many virtual machines an i7 CPU can manage without the feeling that you are using a 1st generation Pentium? I don't know of virtual machines running large databases and development tools (Visual Studio mainly). It would be best to use a double connector MB Xeon or it's too? My choice would be something between i7 - 930 and dual Xeon 5520 or 5620. Also, I would be able to cover future needs (i.e. it would be nice to not throw the entire system 5 years from now, for having been too slow).

  2. I think using a dedicated raid controller (specifically Adaptec RAID 5805) but with SATA disks (4x1TB in RAID50) or maybe 6x1TB in RAID60. It would be a good solution (in speed)? Should I start looking for solutions SAS?

  As you can imagine, the cost of all these components is a little high then if I have to make this move, I want to be as sure as possible that I have I don't get too small for my needs, but also that I have I don't get too. As I said before, I'm open to any suggestion.

  Thanks for any comment on this case.

  Relative to the CPU, it depends on your loads of comments.  But with SATA RAID, the bottleneck is much more likely to be there IMO.

  FWIW, two quad-core Nehalem servers are sometimes "nominal" to 30 virtual machines, but without knowing the charge is pure speculation.

  If you are looking to deploy 1 vCPU customer, a unique quad will most likely very well.  Using vSMP translates into more physical cores (or at least hyperthreading) being necessary to avoid CPU scheduling delays.

  Re disc - Yes each LUN has a maximum size of (2 TB - 512 bytes).  You can create a very large data warehouses using extensions (or simply use several data warehouses), but the underlying storage MUST be able to present the LUN meets the criteria of 2 TB.  While most of the RAID controllers will provide more than one set of RAID-5 LUN, a lot will not be permitted RAID-10 to split, where my comment.  Of course, you should check the documentation for any controller you choose on this point, but it's something to know.

  HTH

  Please give points for any helpful answer.

• Re: What drivers Vista choose for Satellite L300-19F

  Hello

  First, I'm sorry for the bad English because I'm french.
  My laptop is L300 - 19F with Vista.

  I reinstalled Windows Vista and I downloaded the drivers, but there is a problem:
  on the site, on the page to download the drivers, there are a lot of drivers for a component.

  For example, Firmware Update (2 versions) or Modem Driver (3 versions) or Modem region Select utility (2 versions) or Wireless Lan Driver (2 versions), there are many version and I don't know that I have to take.

  In addition, what are the necessary drivers for proper use?

  Thank you very much!

  Hello!

  Did you install the laptop with the Toshiba Recovery disk? The disk from Toshiba are all the drivers and tools.

  If you need the driver from the Web from Toshiba site, choose always the most recent.

  Good bye

• How and where to order the recovery for Satellite P10-304 CD

  Have a Toshiba sp10-304.

  Hear it is strongly recommended!
  Unfortunetly system requires a complete reinstallation.

  Anyone know where I can acquire discs from factory settings or a phone number for Toshiba!

  Concerning

  All the mobile parts regardless if she s a CD or a HDD, RAM, etc. can be ordered from the local approved maintainer.

  You will need to contact the guy and the technician would be able to help you.

  I think that they can order parts directly from the Toshiba so make a call a request for more details.

  You can find the ASP database on the Europe of Toshiba page:

  http://EU.computers.Toshiba-Europe.com/-> support download &-> find an authorized service provider

  See you soon

• Satellite P10-304 - memory upgrade

  Hello

  could someone tell me where to buy additional memory for my laptop?
  It has 256 MB. At the time were reading autour is better and possible to just buy a 1 GB and remove 256 and put in the same dwelling.

  Thank you any help welcomed.

  Hello

  Satellite P10-304 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * modules.

  It seems that it would be possible to upgrade to 2 GB RAM max and that's why you can use 2 x 1 GB modules.

  Welcome them

• Satellite P10-304 - need driver for "multimedia audio controller".

  Hello

  I had to reinstall the operating system on laptop Satellite P10-304 PSP10E ORCJM-EN, but I do not have the drivers for the hardware. I can't find the drivers for the "multimedia audio controller" on the Toshiba site:
  NES http://UK.Computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 526 & selShortMod = 356

  All suggestions will be welcome.

  Thank you very much
  Mark

  Hello Mark

  I guess what you're missing is driver sound.
  Please also check document Setup Instructions and install all the stuff after this installation order. It is very important.

• What are the cards Wi - Fi are compatible with the Satellite P10-304?

  Hello

  Please can someone tell me what mini-pci Wifi cards are compatible with the laptop Satellite P10-304?

  I tried a broadcom 4318 with no look.
  It installs the material as seen in the Device Manager, but can not find all the networks (think there is a conflict with the motherboard)

  Tried an AW-GM100 Azure that has a conflict as soon as the computer message cell phone messages.

  As in advance

  Mark

  Hello!

  Theoretically, most of the WiFi cards should work, but the best way would be if you take a WiFi card that was delivered with a computer laptop Satellite P10.

  I put t know what cards shipped with this laptop, but I have a little search here in the forum and I have created a thread that might be interesting for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23749

  Good bye

• What internal DVD +/-RW will work with my Satellite P10-304

  Can someone give me an answer to what internal DVD +/-RW will work with my Satellite P10-304.

  I said a CSD-6012 or DVD +/-RW UJ-820 might work.

  Help, please

  Thank you

  Lee

  Hello

  Have you checked the manual of the Satellite P10?
  Sometimes, compatible CD/DVD players are in the user manual that must be installed on your laptop.
  If you n t have the user manual, then you can download from the Toshiba page.

  However, if you don't get the right info in the user's manual then I would recommend contacting the ASP in your country for details.
  Usually, you can order a player taken in charge of these guys here.

  It is important that you know which drives are compatible because of the different master\slave\c-salt settings.

  Bye and good luck

• Satellite P10-304 and recovery procedure

  Hi all
  I have a problem with my Toshiba Satellite P10-304, the problem is that I can't plant recover, it does not boot up to windows xp, so I need to recover it, in any case. When I put in the recovery of 1/2 disc it works fine. recovery comes to ask...

  '1... recover the entire hard disk.
  2... mode Recovery expert
  3... exit ".

  I choose the number one, once I kicked a a similar scree comes up saying...

  "Attention!"
  The contents of the hard drive should be removed
  1... Cotuninue
  2 Cancel... ".

  Yet once I press number one to continue. Now once I have this button the screen goes black and a message reading...

  ' GDISK (E) no Suck disk fixed - 1.
  Status
  GDISK (E) No. suck fixed disk - 1"

  Teh screen turns off again and toshiba screen flashes for less than a second and goes off again, with the words

  "!!!!! ERROR!

  Press a key to continue. "

  Once I press any key, the screen remains black with this message now on the monitor.

  "Date: Fri Aug 1 12:51:36 2005.
  Number of error: (11030)
  Message: Invalid Destination drive

  -------------------------------------
  "[PgUp] / [PgDn] [ESC].

  Once I Press esc, this screen comes up and it's been I can't go any further.

  X:\ >

  X:\ >

  It comes to have I'm stuck and can't get that much. I do not think that when recover what it is supposed to go that far, but there is, y at - it another way to reset the laptop may be a reset button on one of the panels under somewere I'm missing or batch should be thrown in the trash. Any help would be greatly appreciated and well thanks. A response as soon as possible would be great, thanks in advance.

  James

  I am sorry to say that it resembles a discarded HARD drive.

  You can boot from a floppy drive and see the HARD drive at all. If you can, then I suggest trying to format the drive in this way and then tries again.

  If this isn't the case, then you should get a new drive.

• Satellite P10-304: the problem writing and erasing CD - RW discs

  Some need help pls. I own a Toshiba satellite P10-304 with a combo player SD-R2412 installed. When I try to burn a new CD - RW, it does ok, but wouldn't allow no other written on the same CD in another session. The written CD - RW is then recognized as a CD-ROM. In addition, it is not possible to erase the cd - rw usinig this player. When I take the cd written for my laptop office of deletion, as it's done with success and my toshiba can then burn again. Any ideas on what to do?

  Additional information: laptop computer came bundled with "drag n dro cd" but I had to install Roxio and even tried the cd writing software provided with windows XP are done everything to nothing. I checked the 'advanced system info-error log' and the report there is 'the device, \Device\CdRom0, has a bad block'; I don't know what that means.

  Cheers.

  Nthunderbolt

  Hello

  In my opinion, it's probably caused by software. In my opinion, you should remove all burning software and verify all burning functions with windows option. After deleting some software, it can happen that, in the registry editor it is a lot of waste that will not be removed completely.

  In any case, delete all the burning software, and you can also try to remove the device from Device Manager DVD. Restart the laptop and DVD should be detected and installed correctly. Try using the option of engraving of Windows and if there is still problem writing once again please.

• Satellite P10-304 power until now

  Hello

  Got the machine Satellite P10-304, which won't turn on after the 2nd attempt. What happened: -.

  Machine power of cold - booted Windows XP ok start. After 5-10 minutes, the machine screen is dimmed (resembles backlight is gone) and couldn't turn off the machine by pressing button, so had to remove the battery to kill machine power.

  Now machine won't turn on (same battery fully charged), when I pressed the power button, I get a light flashed orange once inside the circle of blue light around power button / stop.
  Leave the machine shut down for about an hour and machine started in the BIOS screen, then after 3 minutes the screen is dimmed. Machine unbootable. Checked AC adapter and get 19.3Volts and 6.1Amp for power unit ok.

  Looks like the motherboard plays up and needs to be replaced? Dose - that someone has encountered this problem before?

  Thank you very much

  Hello

  > Sounds like the motherboard plays up and needs to be replaced?
  Yes, it seems so :(

  Maybe it s not the motherboard, but another part of the material. But to be honest, you should go to an authorized service provider. Technicians can check the laptop to determine what the problem is exactly.
  And here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Welcome them

• To install card WLAN in my Satellite P10-304

  Hello

  I have a Satellite P10-304, this model does not appear to be a car wireless installed. Can you tell me what is the correct for this model card, if I could fit myself and where I could buy a home?

  What about Dave

  Hello

  If your Satellite P10 has PSP10E number, you can use follow the WLAN card:
  PA3212U-4MPC (Agere 802. 11b)
  PA3273U-2MPC (Atheros 802.11ab)
  PA3300U-1MPC (Atheros 802.11 g)
  PA3298U-1MPC (Atheros 802. 11a / g)

  Installing the WLAN card is very simply. The WLAN card slot is placed under the cover of the WLAN (bottom) card and placed between the coverage of the ODD and the modem.

  If do you this alone, you can do it slowly and make sure that the WLAN antenna cable is connected properly. If you need further assistance please write again.

• Satellite P10-304 - update Windows 7 problem

  I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows.

  I reinstalled, deleted the hard drive and reinstalled again. Tried the stop and start the Windows Update utility.
  Downloaded the stand-alone Windows Update.

  Updated the BIOS to V2.0 and downloaded the Toshiba Service Station application (who says no update is necessary).
  All this without success.

  My hopes were raised when I saw that the Station Service for Windows 7 32 bit software was available for the P10 304 but I am now at a loss.

  Anyone know if this laptop can be upgraded to Windows 7 and how to get updates of work?

  Help is welcome.

  Peter

  I'm sure that installation of Windows 7 update problems are not specific to Toshiba problems even if you use the Toshiba laptop.

  From my point of few, you should check the Microsoft support pages to find the solution.
  For example this:
  http://Windows.Microsoft.com/en-us/w...#1TC=Windows-7

  Just a tip: I had some problems in the past to install updates because of the antirust software. He locked the installation of some essential updates and after you disable temporal, updates could be installed...
  Missing Service Packs might concern the single installation of patches.