Bluetooth disconnects after mating - Windows 8.1
After the success of coupling it immediately disconnects again
I use an HP ENVY 15 Notebook PC with Windows 8.1
BT installed driver is Intel Wireless Bluetooth 4.0
Would the Bluetooth Driver software (Ralink) MediaTek
Download HP sp65804.exe solve the problem?
any help most welcome
N ° he wouldn't.
If the installed hardware is Intel, then install a driver for a bluetooth adapter is a futile exercise.
Try installing an updated driver for the device you are trying to connect to. This is usually where the weak point is.
Tags: Notebooks
Similar Questions
-
Z50 - 75 crashes when the charger is disconnected after 10 Windows update
Currently using a laptop Lenovo Z50-75, and after that put to upgrade to Windows 10 my computer will display an error "thread stuck in device driver" as soon as he starts the menu start when my charger is disconnected. So my computer is pretty much rendered unusable. I think that this could be a problem with the charger driver, but I'm not sure. Does anyone have a suggestion on how to fix this?
-
Bluetooth problem after updating windows 8.1
I installed windows 8.1 then my bluetooth get troubled. I have search the forum, but I don't know really where (driver) is compatible for my PC. I use HP Pavilion 14-n003tx Notebook PC. can someone help me find the compatible bluetooth driver?
Hello:
It seems that your model has an Intel wireless card (although I've never heard of a N700)...
It's the Intel Bluetooth Driver for W8.1...
-
Cannot access the HP laptop Bluetooth functionality after upgrading Windows XP to Windows 7
Original title: reinstall the Bluetooth Driver
I have a 32 bit HP under Windows 7 Pro laptop.
My machine originally came with XP but when I upgraded the hard drive, I switched to Win7 Pro.
I can't access the Bluetooth of the machine functionality. It does not appear in Control Panel or Device Manager.
HP broke off my machine, so their drivers are limited to XP versions.
Any suggestions on how to reinstall a driver?
Hey Parker,
As you have upgraded to Windows 7 from your pre-installed Windows XP laptop, as the HP laptop is configured to meet the requirement of Windows XP operating system and it is better you contact HP support for an answer to the question and guide you in the right direction by following the links below.
Contact HP:
http://welcome.HP.com/country/us/en/contact_us.htmlPost your question in the Forums of HP Support:
http://h30434.www3.HP.com/PSG/
I hope that the information above helps you.
-
HP Pavilion: Bluetooth doesn´t work after installing Windows 10
Hello
Doesn´t Bluetooth work after I upgraded my OS to Windows 10.
Can someone help me please?
JimWieder
Thanks for the reply and the information updated. Check the link to your model and you will keep. Thre is no specific driver for Windows 10 for this computer for now, but there is a Bluetooth for Windows 8.1 driver.
I could start with the HP Support Assistant, as I mentioned and see if she can find something for you. It is useful to have, as it will seek new pilots as part of its function. If this does not work for you, then you can try to install the driver Windows 8.1 of the support page. Broadcom Bluetooth driver
Try to install such what, first and then Bluetooth test. If after the test, you still have trouble with the Bluetooth does not, try the method of this other link I posted on how to install a driver using compatibility mode, and then see if it will work for you.
Here are other pages that can be useful for you in troubleshooting and testing, and also that of Microsoft.
HP computers - using devices (Windows, 10, 8)
Connect to Bluetooth devices - windows.microsoft.com
I hope this helps.
-
Satellite L735 - 10 c - Bluetooth not working not not after installing Windows 8
Hello
I do a new install of my Toshiba L735 with 64-bit Windows 8 Ultimate
It works great, the only problem is that Bluetooth doesn't ' work.I can't see it in Device Manager.
I have download all patches from Windows 8, I see only a Bluetooth ACPI.I tried to install the battery Bluetooth, but it takes too long to install, and in Device Manager, they are with an exclamation mark with error 19 (incomplete or corrupt registry settings).
How can I do?
Thank you very much...One way: don t create several threads on the same topic.
No one will respond to each thread and it is difficult to follow this discussion in different threads.Back to your question:
Check this box:
[Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm] -
Windows home server disconnects after 5 minutes
Windows Home Server disconnects after 5 minutes and there is no way to get there otherwise than to restart the device. Any thoughts?
Hello
1 - is the home server that is unplug or is it the client?
2. what happens when you do an ipconfig / renew? Which will renew the connection?
I suggest you to try the steps below and check if they help to resolve the issue.
Method 1: Try to perform the boot minimum troubleshooting to find the root cause of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: Make sure that return you the computer to a normal startup mode once it's done.
I hope this helps. Let us know the result.
-
HP ENVY tx1215 m6: after downloading Windows 10 bluetooth does not.
Seen above Notebook, previous bluetooth not working properly. HP service authentic carloss replaced recently the same thing. After downloading Windows 10, bluetooth does not work. Please help in this regard.
Aashrita Dule
Hello:
It is very unlikely that the Ralink bluetooth radio that has your model is compatible with Windows 10.
The only suggestion I can offer would be to try the bluetooth W10 Ralink driver and see if it works.
-
My Mic Bluetooth disconnects when I close the window settings Bluetooth =)
Hello Microsoft =)
For some strange reason, which I do not know... whenever I close my Bluetooth settings... window my micro disconnects-_ -
My adapter had windows 7 find it of own drivers... you know, plug & play. So it's using the basic drivers... which is fine. the meaning of the use of does ' t Bluetooth adapter it's own software. So I'll tell you exactly what I'm doing...
First... I take my Bluetooth headset... Secondly, I right click on the Bluetooth icon in the status bar. Then I click on show settings. Then I click on the Audio tab, go to my bluetooth headset in the list... Highlight it... and I click on connect... 3 or 6 seconds... wa... connected. now I have a... OK button and a Cancel button. I click ok and my Bluetooth headset will beep... I will come back and it is disconnected = (I also on Skype or any other audio software like that... and it won't work. no sound of it. of course.)
So, I'm sure you can see my problem... and I hope you understand my "entourage" with what is happening here. Let me know, thanks.
SSPS, also I'm not the only one... these people too need help:
Thank you, Kim. Of course, this problem has been occurring for some time in Windows 7 and continues to persist to this day. I tried your above corrections, and the first didn't work. However, I changed the Startup Type to automatic as you suggest. It doesn't have an effect at first. Your second explanation does not specify which Bluetooth driver to uninstall. So, I tried to remove the headset from the list of devices, put it back. My sound settings configuration has not changed, and the helmet device was still attached to the default playback and recording device, it was when I first set up the bluetooth headset. When I reinstalled the helmet, it connected automatically this time without having to open the checking of helmet and do it manually. Before I followed these steps, it wouldn't connect and the headset is not found in the sound control window. I had to open the box to control the headset and connect manually. Then, when I was closing the command window, the headset to disconnect, and it disappears from the sound settings window. Now, it connects just when I turn on the headset and put in Bluetooth mode. So, my suggestion for someone else who has this problem would be to follow step 1, and then lift the helmet of devices, then add it to devices. Then restart the computer, and it should work. It did for me. Thank you!
-
Hardware: Dell laptop with adapter Bluetooth 375 Dell running Windows 8
Problem: after Microsoft Windows 8 update, all Bluetooth devices stopped working. Moreover, they could is more to be discovered to pair them up. Device Manager showed all works very well.
Failure of attempts to repair:
-Uninstall all components of Bluetooth in the Device Manager and analysis of the material changes.
-Uninstall Dell 375 in programs & features (WIDCOMM Bluetooth Software) in order to reinstall (R296919). The installation was quickly blocked by the program compatibility Wizard.
-With the Dell software uninstalled, I thought that perhaps that it was no longer necessary, and so Microsoft software would work. Yet once, I uninstalled all Bluetooth components in the Device Manager and analysis of the material changes. Still could not pair.
-Check in Bluetooth services and services were running.What worked:
-Run GPEdit and go to the compatibility of the components/Application Computer Configuration / Administrative Templates/Windows /.
-Enable the following:
Remove Program Compatibility Property Page
Turn off Application compatibility engine
Disable the program compatibility Wizard
-Run services.msc and stop the process of Bluetooth
-Extract the R296919 in a directory
-on R296919.exe and select run as administrator
-For me, the installation failed the first time. Then I repeated it, and it was installed fine, but required reset, which I did.
-At this point, I was able to pair Bluetooth devices again.
-Open Device Manager and go to the Bluetooth Module Bluetooth/Dell Wireless 375.and select Properties. Click the power management tab, and uncheck "Allow the computer to turn off the device to save power" and press OK. If you do not perform this step, you will have all kinds of problems with Bluetooth devices, including keyboards and mice.
-Reverse changes in GPEdit to not configured.
-RebootHow to avoid the problem:
Microsoft has an updated driver that States it is for the adapter Bluetooth of Dell 375.on the update and select Hide update. Microsoft has had quite a few black Tuesday lately, and this update is just another example. The above post started as a question. While typing what has not worked, I developed the answer.
-
"Bluetooth adapter", there is no driver installed for the SM Bus controller ' and "there is no installed driver for network controller" Please help!
I downloaded all the drivers I could from dell.com and install, still nothing. Troubleshooting Microsoft, nothing.
Hello
Have you received an error code?
Method 1:
I suggest you run the Microsoft fixit tool and check.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/
Method 2:
See the following links for more information:
Bluetooth devices do not work correctly on a computer that is running Windows 7
http://support.Microsoft.com/kb/980396
Method 3:
I suggest you to see the links and check.
Add a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerConnect to Bluetooth and other wireless or network devices
http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devicesChange settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-deviceSee also:
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
-
Lumia 520 bluetooth disconect after 5 seconds
Hello, when I connect my 520 Lumia by bluetooth, the device disconnects after 5 seconds by itself. I installed the latest version of the bluetooth driver, but the problem persists.
What should I do?
It's normal if you do not use the link. Windows Phone does this to save battery power. It will automatically reconnect as it appears the traffic.
-
Satellite L510 - WLAN disconnects after having ejected the disk USB
Hey.
I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.
What's happening:
After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.
HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.
I would really appreciate if someone could provide any kind of fix for this.
My laptop:
-Satellite L510
-Windows 7 64-bit OS
-pentium (R) dual-core CPU T4500 2.30 GHz
-2 GB of ramHi captainmarvel,
Just a simple question: have you tried to update the driver WLAN?
New driver WLAN, you can find on the official website of Toshiba in order to check this!Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not? -
Y70 70 Lenovo touch guard disconnecting after 5 seconds
Can someone help me? I have this problem where my laptop lenovo keeps disconnecting after a few seconds. This happens about 3-5 times up to the stop, then I can reuse my laptop.
As soon as the computer goes to the log in page, I type my password in and then after a few seconds, the screen becomes white a bit and it goes back to the log in page where I need to connect again. I don't know why this happens and there is a program that appears with a white border called followed RT_Driver of face. The program does not display anything and is to see through with a white border and my laptop then goes to the page, sign in again.
I am running windows 8.1 and I've updated the windows software when it said install updates, but this problem still occurs.
Please can someone help me. I find this very annoying problem and I've had this laptop for about 1 month. I also have Mcaffee installed on this laptop, so I doubt that it is a virus.
Hello
you have the same problem here. Solved by rebooting the machine in safe mode (hold down the SHIFT key while clicking on restart, and then select problems, options, advanced startup options). After the reboot, log into windows. Once connected, start the Task Manager, Startup tab select, right click on the RTFTrack and select Disable. After that, restart normally, and you should be fine.
My guess is, that Win update had realtek face recognition application in trouble.
It could be useful, good luck.
-
IOS 9.2 Bluetooth disconnects on Apple music
After the 9.2 ios updated my Bluetooth disconnects when I skip a song of Apple's music software. Is anyone having this problem? And it also happens to look like my ipad 2.
I have an iPhone 6 and an iPad Mini 2 and use them with JayBirds BlueBuds X and only them tried for you. No disconnect - if jump using the buttons on the Atria or the screen of the device. Also tried a playlist on each that I had downloaded and another list of reading which has been streaming without any problem.
You don't mention what device are you trying to use?
Maybe you are looking for
-
Qosmio F55-Q502 - charging icon says: plugged in, not charging
I recently had my Qosmio F55-Q502 repaired by Toshiba.Two issues have been addressed, and one is fixed. However, the second attempted to decide without success. When I try to play multimedia games such as call of duty IV, even if the system is comple
-
If I restore the computer to an earlier date, it will restore my password expired?
I use Vista. My main account on the computer (private) is also the administrator account. The password has expired. I saw a warning a week previously, but not once since and completely forgotten. I can access the other user account, but not my ma
-
I finally got a replacement drive and ran the upgrade (to repair) several times. Whenever it says "Windows cannot configure some components" and restart, then try again. I tried to run this safe mode, but apparently you cannot. I tried to turn off
-
Card mother Dell T110II PERC S100 S300 RAID SERVERS2003 integrated use.
Hello world! I'm not Moren help me, my DELL PowerEdge T110 II serverbecause the use of a test software, you must install the SEVER2003 32-bit system, using the onboard RAID, two 500 G SATA hard drives, I know not what method of installation to make t
-
Photosmart C4400 all-in-one printing problem
My C4400 faithful is not print properly, don't give me indications of levels of low ink and Solution Center says it is not connected. I have replaced the ink (black) cartridge, but still only get a gray print, lineage. I tried alignment heads and cle