What permission to assign to the user

Similar Questions

• Clarification about the office pool (Type, assignment of the user,...)

  Hello

  It is extract from ViewPlannerRules_3.0.1_.2014 - 02-05 is creation of desktop VMs.

  Use the view to set up a Pool of Clones related Office

  Follow the documentation view to provide as many clones of the virtual machine of model office like you

  you want to test.

  I'm puzzled what type of pool exactly what I need to create?

  Type-> automated pool (more likely)?

  The assignment of the user-> dedicated or floating?

  Best regards

  Automated with floating assignment pool

• IOM Lotus Notes target reconciliation - Recon events assigned to the user

  Hello
  
  I have configured the Lotus Notes in IOM connector and I executed the reconciliation of the target for a certain user exists in Lotus Notes, which does not exist in the IOM. During reconciliation, a reconciliation event is created indicating he was assigned to the XELSYSADM user. The next step, I would like to perform is the creation of this user to the IOM, so I opened the IOM system administrator and I connect you as the user XELSYSADM. At this point I opens task list and search for approvals pending or open tasks associated with this event of reconciliation, but there aren't any. Can anyone help? How can I fill this event of reconciliation? How can I create this user?
  
  Thank you very much in advance

  If you want that for no match found, he should go to XELSYSADM then, it must decide what to do whther that the user should be created or not. Then, you can simply run Trusted Recon and change the rule of no match to assigned to XELSYSADM.

  Whenever there is no match then he attributes to XELSYSADM then XELSYSADM can create user if he wants to with the help of the button to create a user.

  But it has a disadvantage as users of Xellerate is used everywhere when we talk about Trsuted Recon, then it will change the rule for scope adapter. You can create dummy resource for recon trust with certain fields even as Xellerate users and return this RO in the HS task attribute. You are finished with your condition.

• How do I know what value to assign to the EMDROOT variable?

  How do I know what value to assign to the EMDROOT variable?

  Hello

  To know what value you must set the EMDROOT environment variable, you must run:

  getemhome emctl $

  Of the command that precedes the exit, EMHOME = $ORACLE_HOME
  Then set the environment variable EMDROOT with value recovered to EMHOME.

  Thank you
  Vincent

• BPM 11.1.1.5 dynamic task assignment to the user

  Hello
  I work with BPM 11.1.1.5 (without feature pack). I have a requirement to assign a task to a user dynamically, based on the data that I pull from a DB query. If the task expires, I will assign it to another user, once more based on a DB query.
  
  I was not able to find a way to do this. I tried to create the list of participants "by"Expression", where the expression is: /task:task / task: systemAttributes / task: assignees: the task id, where I already assigned one LDAP user ID to a TaskExecutionData input variable. It does not work!
  I have read a number of forum posts where people try to do this, but they are not answered or responded inadequately.
  I have read a number of posts where people talk of doing so using bpws:getVariableData() where the dynamic list of users is stored in a variable. Would be great, if it worked for BPM, because that is exactly what I would do. However, it is a BPEL solution I see! I could not find a way to access a variable declared in the form of expression in BPM Builder.
  
  Anyone has a solution to do this, please?
  Any help would be greatly appreciated. Is this something that is easier to do in PS5?
  
  Thank you very much
  Brian.

  Hi Brian,.

  Not sure if this is what you need, but to give the BPM work item instance from one of information read from a database table, one approach is to:

  1. read the table and returns the Userid to a variable process the data upstream from the interactive object.
  2 pass the variable with the user id in the interactive human task.
  3 open the human task, click on the assignment tab-> double-click the icon of the performer in the Center-> change the dropdown to "Build a list of participants to help" for "names and Expressions"-> click the 'more'-> click 'Add a user'-> change 'Data Type' drop-down list selection to "by the Expression"-> click on the button «...» "in virtue of the 'value'-> expand the 'task'-> expand" task: payload "-> select the variable that you set the user id.

  I think that there is probably more to your question that, but I hope this is a beginning.

  Dan

• Assigned to the user of the script is not running

  Hello

  I have a problem with running scripts assigned to Quest Console (7.6). In resources/Scripts, I have 2 scripts (a VBS and other CMD). The scripts are located on a UNC resource that is accessible by all users. Script executed manually works perfectly. But not automatically runs in desktop computers running with Windows 7 SP1 VDI.

  Any ideas?

  Hi Carlos,

  I saw a similar problem before, in my case the script run perfectly when I run manually but not happen the result when running via a GPO.

  I did some research and learned that it could be caused by settings on the system UAC, you test the policy. With active UAC will be running all scripts that are run from a policy, but in a different security context of the user. When this OPTION is enabled, logon session/logoff scripts are executed by an administrative user, the office can load it later as the user.

  A suggestion to solve the problem was first to apply this registry setting:

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\

  EnableLinkedConnections = (dword) 1

  Scripts Google UAC and logon and you will find more information and proposed solutions.

  I hope this helps

  David

• What provision I should give the user access to applications through Smartview?

  Should what I give to the user to access applications via Smartview Shared Services. ?
  
  Access to the server would do? Or I have to give something else?
  
  Requirement is tht the user should be able to retrieve and send data via Smartview.

  You need access to the user with access to the server - this will give the user the possibility to connect to the Essbase server in Smart View only. The user sees all the applications listed.

  Then implement the user as write on each application that you want to see them and to present data.

  Kind regards
  Robb Salzmann

• 'Group membership' does not get assigned to the user

  Hello
  
  Currently, we are implementing the authentication of the external table through single sign-on (SSO) as part of our security.
  In our portal, we have columns username, groupname and businessunit.
  
  As part of the implementation, I created the initialization of authentication block so that it stores the user name in the USER session variable.
  
  Select the username from usertable where upper (username) = upper(':USER');
  
  Then, I created a block of initialization of authorization in order to set the groupname. For this I used
  
  Select "group", groupname from usertable where upper (username) = upper(':USER');
  
  Now, when a user opens a session in SSO mode the user is redirected to the dashboard and initialization authentication block seems to work very well the USER session variable displays the corresponding username. Now when the user clicks on 'My account' and see his membership in a group, may not see his name of group that has been defined in the groupname column in the userstable. My scenario is similar to
  
  username GroupName businessunit
  
  x users with power Marketing
  Users are financial Mega
  
  
  
  For example, when the user opens a session x, it should be able to see its membership in the power users group. In this case I could assign privileges to these groups through the administration screen and my security.
  
  Can you get it someone please let me know where I am going wrong?
  
  Thank you

  Hello

  Try the debugging session.
  When you log on to the dashboard checks if the value stored in the GROUP session variable. If there is no value, I think that the user permissions are overridden. Normally users defined in the repository are priority to those coming from authentication to the external table. Make sure that the user you logged in with is not part of the repository (DPR) and comes via authentication external table.

  Let me know if you have any other questions.

  Thank you

• No visible responsibility by the user in the list of the responsibilities assigned to the user

  Hi all

  I don't am not able to view the that have been attributed to the user

  I tried the below but nothing helps:

  Run the query "Syn", given in the WF of role responsibility table

  Run the query "Synchronize WF LOCAL tables" enter the system settings-Orig: All Process: 0 - parallel Mode Logging: LOGGING (logging enabled) - Tablespace temporary: Blank-Riase errors: Yes

  Run the query "Workflow Directory service/user role Validation" enter the parameters - p_BatchSize:10000 - Fix swinging users/roles: Yes - add missing user role assignments /: Yes - updated which columns in the tables WF: Yes

  disconnected and logged in... but still, I'm not able to see, please help me with this

  see if these headphones are up

  Workflow delayed Notification Agent listener

  Workflow Agent listener error

  Workflow Java delayed Agent listener

  Workflow Java error Agent listener

  If that isn't the problem then

  Try end from the user and then delete the end date... then re connect and control

• What trigger is fired when the user closes a Web via cross sign which is in the upper right

  Dear all,

  I have a form that requires a separate canvas. Please tell me what trigger is fired when user close a canvas via cross sign that exists in the upper right (the sign of the cross appear as the corresponding window contains the property of: close the permit YES).

  Concerning

  Rajat

  Never heard of a trigger key to closing.

  As they said above, when you close a window, CLOSING of WINDOW-WHEN trigger fires.

  There you can examine the value of the: system.event_window, which bears the name of the window that fired the trigger.

  A typical use of this must publish a Do_Key ('EXIT_FORM') in your when relaxation window closed

  You don't need to check the: system.event_window, you can have several KEY-RELEASE triggers at various levels if necessary and they will attack the function of closing the window.

• What happens when I add the user?

  Hello

  I want to add a user. I think with administrator privileges.

  How is the Admin differs from the standard?

  It will have access to everything in the two? Fine.

  Nothing will change in appearance in adding a user?

  Excuse my stupidity, but it indicates a base folder will be created with his name. Is that mean a home folder as average with separate applications, desktop, Documents, films, records, etc.?

  best,

  Elmer

  It's for Yosemite, but the same information applies to El Capitan-> OS X Yosemite: Configure users on your Mac will explain the differences between accounts.

• delete the user assignment

  try to remove the assignment of the user for one of my view offices

  tried to use the command line with the following syntax:

  vdmadmin.exe-L vdi-12 - d - r

  This resulted in an error "invalid syntax".

  tried to use instead:

  vdmadmin.exe-L d 12 - vdi vdi - 12 m - r

  This resulted in an error "unable to locate centralizes information."

  can someone point me in the right direction?

  The - d is supposed to be the name of pool of offices and the m - is the name of the computer.   Your values are correct?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Revoke ROLE on the user table

  Hi team,

  I'm trying to revoke grant on the user table

  The Sub statement gives error saying

  [code]

  REVOKE < role_nm > on < a.table_nm > to < b.user_nm >

  Error: ORA 00990: missing or invalid privilege

  [/ code]

  But the following works fine

  [code]

  REVOKE ALL ON < a.table_nm > to < b.user_nm >

  [/ code]

  Please suggest me to revoke the grant on the user table

  Smile says:

  [code]

  REVOKE on of

  Error: ORA-00990: missing or invalid privilege

  [/ code]

  A GRANT on table is assigned to a ROLE and that ROLE is assigned to the USER. So when you want to REVOKE a specific GRANT what is assigned to a user by ROLE. You must REVOKE any ROLE to the user or REVOKE the GRANTING OF THE ROLE.

• capture by the user program in the report window

  Hello

  I am trying to build an interface that allows a user to perform a more in-depth, based on what he sees on a report, and for that I need to be able to get the information of what part of my report, the user is clicking on. I looked almost everywhere, assistance from tiara to wider Internet forums and was surprised to find absolutely nothing on the subject. So I wonder if it can be done at all, and if it is, what am I missing?

  Thank you very much in advance for any information you can provide

  Hello MaxLek,

  It is possible to get information about the objects selected in the REPORT. Here is an example.

  Dim iLoop, oCurrSelection
  
  Set oCurrSelection = Report.SelectedObjects
  
  iLoop = 1 to oCurrSelection.Count
  
    Select oCurrSelection (iLoop) case. ObjectType
  
      box 0
  
        MsgBox "2D - axis".
  
      case 1
  
        MsgBox "the Table 2D.
  
      case 2
  
        MsgBox "Polar".
  
      case 3
  
        MsgBox "3D-Axis.
  
      case 4
  
        MsgBox "the Table 3D.
  
      other cases
  
        MsgBox "all others."
  
    select end
  
  next
  
  

  I hope this helps.

  Greetings

  Walter

• WebVPN/RADIUS - assign to the Group - Concentrator3005

  Client configuration of a Cisco Concentrator3005 using IPSEC on PC and who authenticate via radius w / ranking in a group is a breeze - more I'm not configure an individual user - and won't.

  But I'm banging my head trying to configure Webvpn to authenticate via radius and assign the user to a group.  The default user is always itself to the core group.  I want to find a way to create a user in a group.

  Everyone dealing with this before?

  THX.

  Robert

  Robert,

  First of all, you must make sure that the Radius Server is your first authentication method configured on the VPN3000, WEBVPN reads the list of servers for authentication from top to bottom and the first on the list is to be chosen, second to assign the user to a group, you must set up the value of the class on your radius server, this value must be equal to the webvpn group you must assign to the user.