What protocol used when we use "forms servlet listener" (jserv)?

Similar Questions

• This protocol uses Agent to communicate with the Service

  Hello everyone, this is my first post in this forum and I want to shoot a question if someone could help me.
  
  I guessed that the communication between the api and the server at the time where the user will put api HQAPi = new HQApi (...) is with the http or https protocol, depends on the value introduced in the conf file.
  
  I would like to know what protocol uses agent to communicate with the service. I would like your ideas.
  
  Thanks in advance.

  Hello

  Welcome to the forums!

  Could you clarify your question a bit more? Looking for agent-> server HQ communication or agent-> communication monitored service?

  If this is an agent-> HQ server then they communicate with each other using foam which is a specific HQ communication protocol.

  If he's an agent-> monitored service it depends on the service.

• I used to write in two languages (English and Italan). When I use my Mac, it's easy: I just change the language, and my keyboard is the same (i.e., International English). What I use my iPad pro, instead, he also spends my hardware keyboard.

  I used to write in two languages (English and Italan). When I use my Mac, it's easy: I just change the language, and my keyboard is the same (i.e., International English). What I use my iPad pro, instead, he also spends my physical keyboard, so that for example if I type [keyboard I get an e. It is very annoying and makes the keyboard quite useless. Keeping fixed language I would get bad suggested words.

  You will need to define your physical layout being the same for English and Italian in settings > general > keyboard > keyboard > keyboard material

• What ODI protocol uses to communicate over the network?

  We need to open ports in the firewall to allow the ODI to connect to another instance, but we want it open only for the protocol used by ODI. It would be something like SQLNet or HTTP.

  In general, communication purposes with an agent of the ODI for invocation (i.e. perform scenarios etc.) is performed via the HTTP protocol on port defined by the user, as far as I know - TCP port 20910 is often used. If the communication with the agent of ODI is protected with SSL / TLS, then the initial communication would take place over HTTP on port defined by the user in front of an encrypted tunnel is set up by using the SSL / TLS protocol.

  Database connectivity is also at the level of the network as you say properly and according to the particular database that you are using a different application level protocol will be used by the JDBC driver. For example, database connections Oracle would use the TNS (the TCP port default 1521) Protocol while MS SQL uses the Protocol (TCP port 1433 by default) TDS, but these ports can be customized. If you use tools such as SCP in ODI while you need to open ports between the agent and the target computers so that for example you can access SSH on the target (TCP 22 for SSH default port) machine and so on.

  What this really means to however, it is exactly that you need to open TCP ports would depend on what tools you use in ODI and what technologies are, you connect from / to. It depends also to some extent how smart is your firewall and if it can detect the level protocols such as HTTP application with inspection packages rather than having to allows you to configure ports specific TCP rather than application-level protocols, for example TCP 20910 port.

  I hope that you started Gets

• out of use form mail script

  I have a page of e-mail form which works fine. It is hosted by godaddy.
  
  The problem I have is when I received the email that all the fields are NOT in the same order that they are on the Web page.
  According to GoDaddy, they will be in alphabetical order.
  
  States of GoDaddy help page:
  NOTE: Don't forget that our form Mailing script sort alphabetically the names of your form elements when he composed the e-mail message. This is the order of precedence: uppercase, lowercase, numbers, letters.
  
  Here is my code to the page:
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  test form 2 < title > < /title >
  < style type = "text/css" >
  <!--
  . Style4 {make-size: 9px}
  {.style5}
  color: #FFFFFF;
  do-family: Verdana, Arial, Helvetica, without serif.
  make-weight: bold;
  }
  {.style6}
  do-size: 9px;
  Color: #666666;
  do-family: Verdana, Arial, Helvetica, without serif.
  make-weight: bold;
  }
  {.style12}
  do-family: Verdana, Arial, Helvetica, without serif.
  Color: #666666;
  }
  .style17 {do-size: 9px; do-family: Verdana, Arial, Helvetica, without serif ;}}
  {.style18}
  do-size: 9px;
  Color: #666666;
  }
  .style19 {make-weight: bold; do-family: Verdana, Arial, Helvetica, without serif ;}}
  .style20 {color: #666666}
  {.style22}
  do-size: 14px;
  do-family: Verdana, Arial, Helvetica, without serif.
  make-weight: bold;
  color: #0065B 2;
  }
  {.style24}
  Color: #FF0000;
  font size: 15px;
  do-family: Arial, Helvetica, without serif.
  }
  .style25 {do-size: 12px}
  .style27 {color: #000000}
  ->
  < / style >
  < / head >
  
  < body >
  < table width = "761" height = "907" border = "1" cellpadding = "3" >
  < b >
  < td width = "257" height = "65" > < table >
  < td width = "260" > < table >
  < td width = "210" > < table >
  < /tr >
  < b >
  < td height = "267" align = "right" > < table >
  < td > < table >
  < td > < table >
  < /tr >
  < b >
  < td align = "right" valign = "top" bgcolor = "c5deef" > < form action = "gdform.asp" method = "post" > "
  < p >
  < input type = "hidden" name = "subject" value = "Send form" / >
  < input type = "hidden" name = "redirect" value = "thankyou.html" / > "
  < br / >
  < span class = "style22" > < span class = "style27" > </span > your scenario for pricing Submit < br / >
  < span class = "style25" > and receive a < / span > < span class = "style24" > ANSWER QUICK </span > < / span > < br / >
  < /p >
  < class p = 'style5 style1' > < span class = "style4" >
  < label > < span class = "style20" > type of property
  < input type = "text" name = "property Type" id = "Property Type" / >
  < br / >
  Value of the property
  < input type = "text" name = "property value" id = "property value" / >
  < br / >
  Amount of the loan
  < input type = "text" name = "Loan amount" id = "Loan amount" / >
  < br / >
  LT(N)
  < input type = "text" name = "LTV" id = "LTV" / >
  < br / >
  in foreclosure
  < input type = "text" name = "in foreclosure" id = "in foreclosure" / >
  < br / >
  State
  < input type = "text" name = "State" id = "State" / >
  < br / >
  </span > < span class = "style27" > credit score
  </span >
  < input type = "text" name = "Credit score" id = "Credit score" / >
  < span class = "style20" > < br / >
  </span > < / label >
  </span > < / p >
  < table width = "234" >
  < b >
  < td bgcolor = "#FFCCFF" class = "style20" > < span class = "style17" >
  < label >
  < input type = "radio" name = "status" value = "120 days late mtg ' id = 'RadioGroup1_0' / >
  < strong > 120 < facilities > day late MTG < / label >
  </span > < table >
  < /tr >
  < b >
  < td bgcolor = "#FFCCFF" class = "style20" > < span class = "style17" >
  < label >
  < input type = "radio" name = "status" value = "NOD" id = "RadioGroup1_1" / >
  NOD < strong > < facilities > - < strong > N < facilities > < strong > view < facilities > f o D < strong > < facilities > class efault < / label >
  </span > < table >
  < /tr >
  < b >
  < td bgcolor = "#FFCCFF" class = "style20" > < span class = "style17" >
  < label >
  < input type = "radio" name = "status" value = "OUR" id = "RadioGroup1_2" / >
  < strong > OUR < facilities > - < strong > N < facilities > < strong > view < facilities > f o S < strong > < facilities > FTA - FORECLOSURE < strong > < / strong > < / label >
  </span > < table >
  < /tr >
  < /table >
  < span class = "style12" >
  < class label 'style4' = > date of foreclosure sale
  < input name = "Date2 foreclosure sale" type = "text", id = "sale foreclosure date2" size = "15" maxlength = "10" / >
  < / label >
  </span > < span class = "style20" > < br / >
  < label > < / label >
  </span >
  < class p = 'style5 style20 style1' > < span class = "style4" >
  < label > < br / >
  < / label >
  </span > < / p >
  < class p = "style6" > name of Broker:
  < input type = "text" name = "Name" / >
  < /p >
  < class p = "style6" >
  Phone < label > broker
  < input type = "text" name = "phone broker' id ="broker phone"/ >
  < / label >
  < /p >
  < class p = "style6" > email:
  < input type = "text" name = "email" / >
  < /p >
  < p align = "left" class = "style18" > < span class = 'style19' > comments:
  </span >
  < = cols 'comments' textarea name = "40" rows = "5" >
  type FORECLOSURE here info...
  < / textarea >
  < /p >
  < input type = "submit" name = "submit" value = "submit" / >
  < / form > < table >
  < td > < table >
  < td > < table >
  < /tr >
  < /table >
  < / body >
  < / html >
  
  
  and this is what I get when I receive the email:
  Credit: 520
  Foreclosure: June 1
  LTV: 50
  Name: joe
  Ready: 200
  Ownership: condo
  Broker: 1234567890
  Comments: type FORECLOSURE info here...
  E-mail: [email protected]
  in: Yes
  property: 300
  State: ca
  status: AMENDMENTS
  submit: submit
  
  I'll be in receipt of the e-mail on the blackberry so I really need them in the order I put then in on the page as it will be too difficult to make sense otherwise.
  
  Please help if you can.
  
  Thank you :-)
  
  

  > so I really need
  > them in the order I put then in the page

  suggestion use another script that allows you to set the agenda.

  suggestion two, using the godaddy script - rename names of form/ID field of
  These fields so they will come in any order you like, AFTER sorting by the
  script.

  3 - do not use spaces in the field names or ID.

  aa_my_first_field
  ba_the_name_i_want_second
  ca_broker_phone_i_want_third

  using two letters in the prefix allows you to insert a new field between
  existing fields later as bb_this_is_now_third

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• DROP the USER using Forms 6i

  Hai All,
  
  I want to create and drop database through forms 6i users.
  
  The user creation works fine for me, but the deletion of the user does not work.
  
  I use the code
  FORMS_DDL ('DROP USER CASCADE TEMP_USER'); to remove the user.
  
  but it's not working.
  
  
  one you suggest how can I remove a user from the database using forms?
  
  
  Thank you
  
  Manu.

  It works through several sql?
  If so you could do a test with immediate execution...

  create a database procedure:

  create or replace procedure execute_immediate(ivStatement in varchar2) is
  begin
    execute immediate ivStatement;
  end;
  /
  

  and call from forms:

  begin
    execute_immediate('drop user test_user cascade');
  exception
    when others then
      message(sqlerrm);
  end;
  

  run errors of immediate installation of oracle, so you should see what is happening

  concerning

• How to find the security protocol used by a site in firefox to version 24.6.0

  I'm unable to find the security protocol used by the site, either SSL or TLS 1.0 or 1.2.

  I see my answer above is marked as useless, so I guess it doesn't help for Firefox 24.

  You should be able to see which version of the TLS Protocol and encryption to agree to the current use of press.
  You can use the above posted extension or check in the Security tab of the Web Console (Firefox/tools > Web Developer).
  24 Firefox supports only TLS 1.0 (security.tls.version.max = 1), so that only leaves you with Protocol to guess.

  • http://KB.mozillazine.org/security.TLS.version. *
  • 0 means SSL 3.0, TLS 1.0 means 1, 2 means TLS 1.1, 3 means TLS 1.2 etc..

  In Firefox 24 you have the Security tab in "tools > Page Info > Security" to see what level of encryption is used, and you do not see what costume of encryption is used.
  To find you would have to disable any combination of encryption algorithm by setting the Pref security.ssls false and allow both until you get a secure connection.

• What is using my hard drive?

  I have an iMac with 500 GB of storage, and when I go on my Mac-> storage, it says that I have 358GB of "Other" and I have no idea what it is. About a year ago, I had about 200 GB of 'Other', and since then I downloaded barely any more things that must use within storage. I record and edit videos much, so I used to have a lot of 'Movies' Ballyhoo to the top of my hard drive, but I just cleaned all my videos, including the library of iMovie and also deleted all my projects iMovie, but who have released all the space at all. I don't know what all these 'Other' stuff, because I do not use iPhotos, iTunes, and I have not all backups. No idea what it could be? Thanks in advance!

  OS x: what is 'other' space about this Mac? -Apple Support

  What is 'Other' when you look at 'Storage' on the hard drive?

• Why after reformatting and reinstallation of vista, it seems he used 20 GB of space, and I do not see what is used in this space... NOTHING else has added other then the drivers

  Had problems with the speed of the computer. He was never reformatted since bought 4 years ago.

  I reformatted my hard drive (disk recovery do not hit Yètè - 10 gig inside). I reinstalled Vista premium home from my dell disk edition. I added the drivers and began the labourous task to make the updates of windows (SP1 and SP2) and various others pushed at me. I have minimum one... IT set my free AVG antivirus protection. I have NOTadded from other programs or files/images etc. I have a drive hard 62 gigabytes and now only have 33 gig left to use!

  When I try and search which uses all the memory files add up only to a few 3 GB of space. What is using the rest of this space, where is it and how do I get to see it! ???

  as I said 62 gig disk hard - 3 gig of programs - 10 gig of recovery = I have 49 gig of space.

  but I did only 33 gig of space!

  Al

  Hi AlRomMaron,

  I suggest you to read the article: http://support.microsoft.com/kb/919183

  The additional 15 GB is taken up for the actual operating system (OS) as noted in the article (15 GB required for the OS)

• What phones use version 4.2

  Hi, I want to know what phones use the 4.2 version of the API.  I develop an application that use a few things that are not available in 4.2 and would like to know if I'm just too.

  Also, I am trying to install the 4.3 but I get an error when I try to install from the site to update blackberry within Eclipse.  It's my mistake:

  No repository found for blackberry update location

  Does anyone else have this problem?  Is it possible to download the JDE component package and install it maually?

  Thank you.

  The only phones that used 4.2 were the original pearls devices, the 8100.  These can be updated to 4.2.1 and later.  I would ignore 4.2 unless you have good reasons not to do so.  However 4.2.1 you might consider, as the original curves are supported by this level.

  So no help with Eclipse, still using the JDE.

• What everyone uses for an SSL certificate on the wireless controller?

  If I use the SSL certificate generated locally on my WLC Internet Explorer always shows the "untrusted cert alert" when users try to authenticate through the web interface. What can I do to fix this do I need to buy a cert? If so where is the best and the best place to do this? GoDaddy? Also, I bought one for my mail server and had set a domain during the process name. What should I use for my WLC? The URL during the authentication process web show https://1.1.1.1

  RapidSSL is your best bet. It is less than $90 for 1 year with renewal and insurance. 5 years is like $ 380. GoDaddy will not work because they use chained certificates.

  On the VIP, you enter the DNS domain name as what you used on the certificate CN when generating a csr. Of course, you have to solve the CN name to 1.1.1.1 or change the 1.1.1.1 to another ip address that is not on your network. Restart the wlc and your done.

• What type of device control / input is more suited to editing? mouse, trackball, trackpad, pad type Wacom or what you use?

  What type of device control / input is more suited to editing? mouse, trackball, trackpad, pad type Wacom or what you use?

  Hello

  If you change just pictures I would say that stick you with a mouse, but if you want to do anything that involves drawing or tracing, then you can't beat a graphics tablet. You can also have a mouse and Tablet working side by side if some of the drawbacks d gap specified can be overcome by opting for the mouse when required. Trackballs and keyboards are very good for spreadsheets and word processors, but useless for graphics programs in my opinion. Rohit and D pit mention Wacom Tablets and I'm one who sells for about £400, but I also have another from a Chinese manufacturer called Oh that is every bit as well - and believe me I am ultra picky about these things and that it sells on Amazon for £60, or 6 times less. The only advantage of the Wacom is when you want to do calligraphy because it supports what is called tilt, otherwise in many ways the oh is better - unless I use more than my Wacom. Many people will tell you the drivers are poor - well I am disagree the Oh worked with Windows 10 immediately while the Wacom took 2 hours to get it to work. You will find different designers will have different opinions however. If you win a lottery you get a Wacom Cintiq, which actually is a 27 inch monitor inspire you and you can't get a natural well more work than this, either as replacement of the mouse or a drawing tool - it's his £1800 - we can all dream I guess. Oh made one too for £500, but it is not so good, unfortunately.

  

• How to create a new bar using Forms 6i

  Hi all

  I use Forms 6i and I want to create a new form a bar...

  P.S. the info to display will be seized another form & stored in the database...

  In other words simple, a mobile text bar

  all the ideas!

  
  

  Thanks in advance

  I came up with a solution that worked really,

  forget the displacement of a text, I have created a slider & a timer when the timer changes msg loops...

  Hamid thanks for your help

• Protocols used by the data store browser

  Can someone tell me what protocols are used by the browser download the data store and download functions.

  Thank you.

  HTTP/HTTPS

  -Matt

• Problem component form IN. custom form using forms of customization

  I have an obligation to use forms of customization to call a custom since the PO form form. The user wants to make changes to another table, return to the calling form and be able to discard all changes in both forms. I created the custom at the STATION before returning form and commented instructions commit.
  
  First of all, I used the internal command to customize the forms 'launch a function"to call the form. The probem here is that committed changes are committed to the database when the custom form is closed. My guess is that the launch of a function to open the form in a new session. Is it possible to change this in the configuration of the Application of finance?
  
  Second, I tried to use 'Run a procedure' with this code
  =' start FND_FUNCTION. EXECUTE (FUNCTION_NAME = > 'fnc_name', OPEN_FLAG = > 'Y',)
  SESSION_FLAG = > 'n', ACTIVATE_FLAG = > 'Y'); end '
  where this error "could not be determined due to the error ORA-00923: KEYWORD not found or provided. I replaced the single quotes around the literal with the double quotes, which resulted in a large amount of errors. I tried to replace the double quotes with three single quotes and got the FROM keyword error again.
  
  I appreciate all help. Thank you!

  FND_FUNCTION. Execute is an API on the client side that in the FNDQSF library, while the BuiltIn Execute a procedure studied the only DB procedures.