black screen with a header of C:\PROGRA~|\myWEB~\19.bin\n3Srchmn.exe

Similar Questions

• HP laptop: black screen with cursor

  When I turn on my computer and type my password, it goes to a black screen with a cursor.  I tried different things but nothing works.  I just did a restore of the system 2 days ago cause the fan was not working. It worked yesterday.

  Hello

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• Black screen with flashing underscore concerns after removal of Rootkit

  HP Envy laptop (Win 7)
  Microsoft Security Essentials identified the Alureon trojan/rootkit, but could not clean after numerous attempts. I downloaded Malwarebytes Anti-Rootkit and it ran. He found and cleaned 3 threats. After completed cleaning, the laptop it will only boot to a black screen with a flashing underscore.

  I can access the boot, BIOS, System Recovery menu, etc. by pressing ESC at startup. However, I can't get into safe mode.

  There is an HP Recovery Manager option in the boot menu (F11) where you can access to Windows system restore, but also a few other options. I tried several restore points. Some boot worked but it is still in the black screen, other has no restore points.

  Thank you

  Hello

  In this case I suggest you select the option 'System of valuation (restore your computer to its original factory State)' - this will reinstall Windows 7, all software drivers and original, and all of the original scores.

  At the beginning of this procedure, you will have the option to backup your files (providing the files have not been corrupted)-this can be done for a connected external HDD or usb flash drives.  A full description of the backup process are under the heading "If you want to back up your personal files, follow these steps to create a back-up" on the following link.

  http://support.HP.com/us-en/document/c01867418

  Once completed, continue with the Factory Reset.

  **************************************************************

  Once the process is complete recovery, you'll always be able to create your 1 set of recovery on a usb flash drive media - the procedure is detailed in the HP document on the following link.

  Create recovery media - Windows 7.

  Best regards

  DP - K

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• 10.11.6 - black screen with cursor in security update 2016-001

  Hello

  After installing safety day 2016-001 10.11.6 and reset as part of the installation process, I get a white apple logo, the white line will blink twice and then I get a black screen with white cursor. The cursor moves with the mouse but nothing happens and I do not get the login screen. This happened on my MacBook Pro and my iMac (retina 5K, end of 2014) (2015).

  Any help is greatly appreciated.

  Best regards

  Tom

  Same problem with iMac 5K, no problems with MacBook 2016 if. Very glitchy update indeed.

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• C50D satellite - black screen with code series

  I just changed on my computer and it came with a black screen with a series of code

  series of code?
  What is the text that you see?
  If you google code, you can find the solution.

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• Satellite L850 - 17 k - black screen with blue dots

  Satellite L850 - 17 k black screen with blue dots see photo
  It is THE video card, can't find it.

  See photos

  If you see the same on internal and external display LCD, I presume that the video card is faulty.

• Satellite X 205-SLi3 - black screen with the mobile mouse at startup

  I have a computer laptop X 205 - Sli 3 satellite, which is a little more than a month and running windows Vista. (let me know if the exact specifications make a difference)

  Yesterday morning my laptop was working fine, I arrested him at home because I need to take to work with me to get some files there. However, when I tried to turn it back on all I got was a black screen with cursor mouse mobile white dead center. I saw other posts with similar problems, but no solutions.

  Loads everything up as normal at the beginning: I get the Toshiba load screen (this allows me to make changes to the boot from there with F2, F8, F12 or, but none seems to have no effect) and I get the little green loading bar of Microsoft just before the screen blinks a few times and then turns black except for the white mouse. The touchpad, Capslock and scroll lock keys * are * admissible, but the function keys and Ctrl + Alt + Delete to do * not * work. There is no way to stop the laptop at this point without maintaining the power button.

  I tried to start in safe mode, safe mode with networking, safe mode with command prompt, only to get exactly the same result after Windows loading bar. (only a lower resolution on this beautiful Virgin high-def screen mouse cursor). I activated the boot record, nothing, I tried to start with the "last known good configuration", nothing.

  I tried windows repair options: repair system, System Restore (it * was * a windows update just before restore point in my laptop screwed up and I m wondering if that has something to do with it because it was the first time the computer was turned off since the auto update installed... but get an older restore point does not help) , as well as the windows memory diagnostic tool. Everything is displayed normally but still black screen after the loading bar Microsoft...

  I also tried the debug mode, and directory services restore mode just for the heck of it - each time the black screen of death.

  I even put in the Toshiba recovery disc and put my laptop to boot from the CD rather than the HD (it gives me the same options by pressing F8 and go to repair are starting only I didn't have to put my admin password)

  The only thing I can think that I n t done is format my whole hard drive, I know that this is not always a solution, and I prefer to keep all my school and work files if possible. Fortunately I am able to get into the command prompt BACK and some of the most important things am copy on a USB key, but I'll still probably lose all my programs and larger files.

  Someone had a similar problem?
  If so, what was the solution?
  I would call all technical support, but I won't have time until after the new year to spend on the phone and I have a feeling that their solution will be to format and use the recovery disc.

  Man, such an expensive machine and then all this work of wouldn because of some software sh... So, if you have backed up your most important files, then, I would _recommend_ you to recover your machine. Won´t solve you anything just trying to find the error, believe me, you'll go nuts.

  Just put the recovery in the drive and start the process of "delete-all-my-programs-but-protect-my-nerves-and-make-everything-OK".

  Welcome them

• All black screen with a mouse that is visible on the Satellite

  I have a toshiba satellite laptop 2 years old, and it works pretty well so far (battery replaced in July).

  Yesterday, I was using it as usual, then close the lid and went for a shower.
  20 minutes later, I came back, it works again, and he went to a black screen with a visible mouse.
  However, none of the keys produce any response and the mouse not to slam.

  I tried several times it works and stop.
  Twice he went to a white screen with all the icons of bottom bar of size reduced and grouped in the upper corner, as well as a few photos, that I had just downloaded.

  A few forums I saw answer other users have suggested using the vista disk to restart, but I'm on study abroad for a year in the United States and thus didn't drive.
  In addition, these users reported a collision until it happened.

  I'll keep on at the current time to turn off in the hope that it will come back to life after a stop appropriate through loss of power.

  I would be really grateful for any suggestions you can give me, thank you.

  Hello

  I put t know which model of laptop you have, but the first thing that you should try the new installation of the OS.
  You don t have any installation disc that's pity
  However, you can try to start Notepad using a Windows live CD.
  This system is called BartPE or WinPE
  Google for it

  This don t systems must be installed on the HARD drive, it works like a linux live cd you boot using such a disc and a few sec later you get access to the HARD disk

  I think it is good idea to check if the laptop is ok

• HP Pavilion laptop g6: black screen with white cursor, connect

  My laptop is a few years old and today after I log in, I get a black screen with a white cursor. I read a few threads on the forums and have tried to take the battery out and pressing the button for 30secs-2mins (tried twice). I can access everything ok in Mode safe, so made a malware bites scan & clean registry. No maleware was found and I rebooted, but always the same black screen when you connect in normal mode. I tried to access the Advanced tab in the BIOS to make the test hardware, but I do not have this tab. I'm out of ideas. Help, please

  B_S2

  Hello;
  
  Let me welcome you on the HP forums!
  
  As it works OK in safe mode, then it's SOMETHING that is loaded at startup which is screw up the display.  Could be a runtime program. could be drivers, might be a Service.

  No easy way to tell.

  Demarrer start in safe mode, type MSCONFIG in the start area.  When that opens, turn off ALL startup items. Reset.

  The PC now work, if one (or more) of these numbers - and you have to go through a tedious process of re-enabling them one at a time until the PC fails again.  The last of them that you re-activated was the problem.

  Here is a tutorial on how to do it: http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/

  If the PC still does not work with all startup items disabled, then return to msconfig and click on the Services tab.  Check the hide services Ms.  Then turn off half superior Services.  Reset.

  If the problem is resolved, you will need to go through a tedious process of reactivating a Service at a time until you find the one that is the problem.

  If the problem is not resolved, turn off the other half of the services.  Repeat as above.

  No easy way to do...

  Good luck

• Tecra M2 - black screen with blinking cursor

  Hi guys,.

  Im hoping someone out there might be able to help me fix my laptop.
  Ive read a few posts, but not sure they can help me.

  When I swicth on my Tecra M2, I just end up with a black screen with blinking cursor top-left, or I get a screen filled with a mix of 0 and 1.
  Sometimes the home TOSHIBA screen appears with the boot options, other times it doesn't.

  I can't boot from a CD and it does not start on the HARD drive. Ive took the HARD drive on and the CDROM outside but it does the same thing that suggests to me that its does not get via the BIOS as far as the boot sequence.

  This sounds like failure of the BIOS for you and you know a way to fix it? Ive tried to take the battery, turn off and start again, but the same thing happens.

  Any advice would be appreicated.

  Thank you

  Ross

  Hello

  The cursor blinking in the upper left corner is known to me.
  I got a same problem or question may be similar.
  My laptop (from another manufacturer) didn t start but only the cursor appeared.

  In my case, the HARD drive was dead, and the operating system could not be loaded.
  In your case, the HARD drive may be dead, but usually the laptop must be able to boot from the CD/DVD drive so I m wondering why you are not able to boot from the disk
  However, the first of all what you need to check if the HARD drive is listed and recognized by the BIOS.

  Press ESC, then F1 to access the BIOS.
  You can also set the BIOS to default settings too.

  If the HARD drive is not recognized, you should replace the HARD disk.