What reopened file did not use the settings not saved

Similar Questions

• After the use of trojan killer mycaptures files did not restore completely mainly the icons in the task bar and the status bar/windows vista

  After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar

  Hello

  Method 1:

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: Run SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run system restore by keeping the computer in the boot.
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode

• I paid to Plan creative cloud (UN Año) fotográfico (n. º of pedido 11854470059). It s already charged on my credit card, but the products are not available on my account. What can I do to use the software?

  I paid to Plan creative cloud (UN Año) fotográfico (n. º of pedido 11854470059). It s already charged on my credit card, but the products are not available on my account. What can I do to use the software?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEAS

  I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEASE PROVIDE ME WITH A

  Deleted file recovery can recover incomplete files, i.e. the part of these files may be missing.  Recover deleted files is much more reliable if recovery of a backup, instead of using recovery software.

  These things depend on the operating system and the file system.

  One thing, you can see: open one of these files damaged with a text editor, and then make sure that the constant % PDF is somewhere in the first 1024 bytes.

  PS please do not post ALL uppercase; It is very difficult to read!

• Can you use the settings in win 7 If you switch to xp?

  Win 7 for win xp

  Can you use the settings in win 7 If you switch to xp?

  Thank you guys so much... I don't really know my question... but with these answers that you have provided me, I think I know what to do!

  You never mentioned anything on dual boot Windows 7 and XP in your question, which mentioned the other contributor.

  If you consider the above here are easy to follow Guides.

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  SECOND OPTION

  When Windows 7 is installed first

  Warning

  • If you have a RAID configuration, you will need to have the XP RAID drivers for your specific motherboard on a floppy disk to select and load the F6 during the XP installation prompt .
  • If you have a SATA drive, then you will need to do one of the following options to load the drivers for XP SATA for your specific motherboard.
    • How to Slipstream SATA drivers in the installation CD of Windows XP with Dual Boot of Windows 7 or Vista
    • How to load the SATA drivers in the installation of Windows XP on your PC from Dual Boot with Vista or Windows 7 to find out how to load your SATA drivers from a floppy at the F6 prompt while installing XP.

  1. to create a new Partition on hard drive Windows 7
  NOTE: If you want to install XP on a separate internal hard drive instead, then skip this step and go to step 2.

  (A) in Windows 7, select and reduce the volume of Windows 7 in how disk management MB (1024 MB = 1 GB) you want to have the XP partition. (See screenshots below)
  NOTE: Would you do a method at this link.

  

  

  

  2. insert your XP installation disc, and then restart the computer and press any key to start from when you are prompted. (See screenshot below)
  NOTE: Ensure that the CD/DVD drive is selected first in the boot order in the BIOS.

  

  3 XP installation, press enter. (See screenshot below)

  Warning

  • If you have a RAID configuration, you will need to have the RAID of XP drivers for your specific motherboard on a floppy disk to select and load the F6 during the XP installation prompt .
  • If you have a SATA drive, then you will need to do one of the following options to load the SATA for XP drivers for your specific motherboard.
    • How to Slipstream SATA drivers in the installation CD of Windows XP with Dual Boot of Windows 7 or Vista
    • How to load the SATA drivers in the installation of Windows XP on your PC from Dual Boot with Vista or Windows 7 to find out how to load your SATA drivers from a floppy at the F6 prompt while installing XP.

  

  4. press F8. (See screenshot below)
  NOTE: On some multimedia keyboards you need to maybe press the F-Lock or key function before you press F8.

  

  5. select (step 1) partition or hard drive that you want to install XP on the help of the arrow keys and press ENTER.

  

  6 the installation of XP.

  Tip

  If you get the error loading operating system after XP is restarted:

  • Using your Windows 7 installation disc, start at the prompt at startup.
  • Type these commands below, and then press ENTER after each one.
    • Bootrec /FixMbr
    • Bootrec /FixBoot
    • Bootrec /RebuildBcd
  • Exit command prompt and restart the computer.
  • At this point, Windows 7 should start up in the same way before you try to install XP.
  • Go to step 8 below and run EasyBCD in Windows 7 instead.

  7 under XP, download and install .Net Framework 2.0 (32-bit) version or .Net Framework 2.0 (64-bit) version first and EasyBCD (free version) for your (x 86) 32-bit or 64-bit (x 86) XP.
  NOTE: In XP, Net Framework must be installed to run EasyBCD. Only 'free download for limited and non-commercial use downstairs' or 'Older Versions' to the right are free to EasyBCD. Registration is not required to download EasyBCD.

  8 run EasyBCD (free version).
  NOTE: This is necessary to fix the Windows 7 boot file and add to the list of Windows XP boot manager.

  9 on the left side of EasyBCD, click on the button Add a new entry . (See screenshot below)

  (A) in the upper part under operating system, click the Windows (see screenshot below)

  (B) to the right of Type, select Windows NT/2 k/XP/2 k 3 in the menu drop-down. (See screenshot below)

  
  WARNING: Don't forget to leave the box checked automatically detect the correct drive .

  (C) to the right of the name, you can leave the default value of Microsoft Windows XP under the name to display in the Windows Boot Manager, or you can type any name , you do not want to have instead. (See screenshot below)

  (D) click thedd entry has. (See screenshot below)

  

  10 on the left side of EasyBCD, click the Deployment of BCD , select (dot) the option install the bootloader of Windows Vista/7 on MBR and click Write MBR . (See screenshot below)

  

  11 closing EasyBCD.

  12 restart the computer to be able to boot from Microsoft Windows XP or Windows 7. (See screenshot below)

  

  Tip

  If Windows 7 does not start when selected, use the Windows 7 installation DVD to do a Startup Repair.

  That's it,

  See you soon.

• Possible to force overwriting of files when you use the method. render()?

  Hello world

  Hope all are well.  I looked at the documentation available in the Guide scripts of the effects after, but could not find any information on this.  Is it possible to force overwriting of files when you call a rendering method. render() in a script?  I know there is a constant that can be used to force overwriting of .aep project files when you use the method. close() on the app object.  For example, it's documentation:

  Action to run on close. A CloseOptions enumerated value, one of:

  CloseOptions.DO_NOT_SAVE_CHANGES : Close without saving the changes. CloseOptions.PROMPT_TO_SAVE_CHANGES : Whether to save changes before closing.
  CloseOptions.SAVE_CHANGES : automatically record on the end.

  Is there something like this for managing conflicts of files during the rendering process?

  Thank you
  Arie

  That's what I do. It seems to work:

  app.beginSuppressDialogs ();

  myProject.renderQueue.render ();

  app.endSuppressDialogs (false);

  Dan

• What advantage is there in using the NI USB-232/4 on a standard USB Serial Hub?

  What advantage is there to use the NI USB-232/4 on a shift to USE of concentrator series?

  

  I have an application that requires LabVIEW control of 19 instruments that communicate via RS - 232.

  I have read the Datasheet for the NI USB-232/4, and I see no benefit of spending $528 for this unit (five times) on a standard USB to Serial hub for half the price.

  Can someone tell me if there is an advantage for the NI USB-232/4 or if they have had experince with one?

  Thanks in advance.

  Agile wrote:

  Thank you, NYC for the quick response.

  Why you prefer that your desktop with taken PCI card in charge of ports series? The space? COM stable #s?

  COM stable #s, harder to disconnect randomly, don't have to worry about the bus power, do not have to worry about Windows randomly powering buses as a feature, reliability, often less expensive energy saving...

• When I get an email, according to windowsmail with attachments, I can't file attachments by using the file command menu

  original title: impossible to file attachments in mail

  Hello; I'm with family Vista premium and windows mail as a messaging system. I was with IE8, and now I've migrated to IE9.

  When I get an email, under windowsmail with attachments, I can't file attachments by using the file command menu. This option is blocked. Under windows mail, I went to tools, options, security and made sure that: Let not the attachments which are unsecured... box be deselected. It makes no difference, and I still can't save attachment like this; I CAN SAVE BY CLICKING and opening the attachment and save it but it is not satisfactory that I can't save the attachment by using the file command menu.

  Can you help me please?

  IE9 is certainly the culprit and there is more questions. I know that some MVPs have contacted their MS threads about it and even received no answer.

  My guess is that MS will not address this issue. Do not forget that the development team of Windows Mail is dissolved by the MS in June 2006. (Yes, while Vista was still in beta). I seriously doubt they care.

• 9.2.0.6 moving database files and redologs using the dd command.

  Hi all,
  
  I need to know if someone have take a cold copy of database (data file and redologs) using the unix dd command.
  The problem is related to the value to be assigned to "bs" in the DD.
  
  For the data file, I know to do the same thing of block_size for the tablespace. I'm not sure of the value to assign to "bs" to the redologs.
  
  Any suggestions are appreciated.
  Thanks in advance
  
  Adriano
  
  PS. I'm pass raw partitions of the data files and of redologs from HP - UX 11.11 RISC on SYMM8830 for HP-IA64 using lvm on HP XP24000 with veritas.
  
  Published by: adriano.ba on October 17, 2008 12:23

  as to the "bs" to command "dd"?

  DD if = of = bs = 1000M

  If your raw device is in GBs, you can give a higher as 1024M... Sometimes the operating system does not have higher values as 1 GB... in this case, you can give all the values as 1024 K, 100 M, 500 M... Like this...

• How can we support WAV file stream by using the window media services

  How can we support WAV file stream by using the window media services in Windows Server 2008 R2

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost

  By mistake, I clicked file history on. The USB key used for ready boost is selected and that the disk is write protected. Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost. I don't have an another USB suitable for ready boost.

  Hello

  You should be able to disable the history of files by using the local Group Policy Editor.  Consult this publication of the article.  Use the #2 option.

• What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  Original title: Windows Fax and Scan

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  A piece of hardware called a Fax Modem, installed in or connected to your computer with the appropriate device drivers from the manufacturer of the device, you have installed in or connected to your computer.    And a telephone line.

• Why Lightroom will not save the file when you use the image Capture?

  When you work with video in Lightroom 5, whenever I press "Image Capture", I get an error message that says: "cannot save the file." I tried this on several video files, and I get the same message. Video files are. MOV files. I can't understand why this is happening!

  I had this same error message. I solved it when I moved the video file on the hard disk internal to the computer, and then it worked perfectly. He always gave the error message when I used an external video file from my hard drive. There for a long time until I tried this. No one answered this problem in forums that I could find.

  I hope this helps.

• Returning to Win 7 using the settings menu

  I have an old machine with 10 Windows installed that I want to convert to Windows 7, so I can run some software open source (Hadoop etc) and use it as a training machine.  I have MS Win 7 Ultimate license - but I don't see otherwise than to use the option "recovery" as described in a post on the MS community.  It's a little scary - if you go to settings > Update & security > Recovery > reset this PC > Get Started, then it asks if you want everything clear, or, keep personal files.

  It does not say right here that it will restore the original operating system which I believe has Win 7 (but may even have been something before - I don't remember).  I ran thinking maybe I would see a choice of OS to come back, but it starts just the treatment as he was going to erase everything.

  Question is: what happens to that > starting point.  You will get some choice of OS to come back until your existing operating system image is deleted?

  We spent the 30 days grace period?

  If so the old windows folder has been deleted if it does not restore win - 7.

  You will need to clean install if you did not bother to create a system image on a hard drive completely separated before the upgrade.

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If looking for updates to hang on a current installation,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  You can try and install the latest client update manually let your update settings to never check for updates until you install it.

  https://support.Microsoft.com/en-us/KB/3138612

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• What CCP file change fails with the error "corrupt package."

  Hello.

  I usually same packages on my local computer and then copy them to a network drive, for the deployment.

  However when I try to change a package I made, creative cloud package manager fails with a message "selected package is corrupt". I have tried to map the folder on a network drive or copy to a local folder, but it does not work.

  It seems to work only when I copy it to the same folder where it was created. However, I have a few packages which I do not know the location of origin.

  What can I do to change this package?

  Thank you.

  Hello

  The CCP file you load is actually just a small xml file that should be only a few kilobytes. It contains pointers to downloads in cached and you state that you deleted these updated downloads caching.

  Whenever you build a package you can use different settings. For example named user or serialized deployment. Editing the file CCP only allows to change applications and updates included no other details such as information about licenses and how to manage updates.

  If you do not want to deploy individual applications, I would say a package containing just this request. There are no limits in packager for which of your licensed applications you include in your package, what you call, or how many packages you build. I think that save you time and give you a little more flexibility, after all, this is probably the case that not all your users need all the software in CC.