What's new in Premiere Pro CS5. Questions: markers, shortcuts, key frames and more!

Similar Questions

• New on Premiere Pro CS5.5

  Hi all

  Recently moved upward to CS5.5 of PE8 and hoping for some advice before starting my main project.

  Project will be approximately 1 HR long, want to be able to burn any DVD Blu Ray as well as the finished product. Most of the footage was shot so far with / Handycam Sony HDR - CX, AVCHD located on FH, (should I use FX?). Some also have film shot with a standard DV camera and I would use both in project?

  I am able to create the project with 5.1 SS and always use footage with 2 stereo channels also?

  Played around looked suspicious, I have an incorrect setting, from the tutorials a bit edition with some success, until he comes to burn on DVD, seem to say don't bother the settings of the project at the beginning?

  My main issues so far are - should I set the necessary parameters at the beginning of my project? and if so what settings should I choose for desired finished products?  Also should what settings I choose when recording on HDD to burn it to DVD and then BR discs?

  Thanks in advance for any help.

  You can do a test of Red Giant Magic Bullet instant HD up-rezzing the SD material to HD. Some users really like it for their story, but others are the result not in their standards. Only a trial will tell you if it helps with your images.

  With a master 5.1 and the Minnetonka Audio over-codes DD 5.1 SS plugin, you can work with stereo equipment. There are many ways to use it, just leave the "Audio" Stadium collapse of 5.1 to stereo or using the Panel mixer Audio to place the apparent around the Audio scene source, or still to duplicate this stereo stream and may add Reverb and perhaps delay the dupe, then adjust the locations on the stage of (fake 5.1 Audio).

  Now, you do not have a 5.1 Master and also the SurCode plugin or program/CPU very similar to the output of DD 5.1 SS, as an AC3 track.

  Good luck and being new to PrPro, don't forget to spend some time with the First FAQ section. There are a ton of good advice, with links to the full articles, the file of help and tutorials. Great and useful to read here.

  Hunt

• MOV files in Adobe Premiere Pro CS5 - XDCAM (MPEG) MPEG 1/2 (xdvc) resp.

  Description of the problem:

  I got a bunch of MOV files on a disk formatted HFS + for editing on Premiere Pro CS5 (5.0.3). When I import to Premiere, first said "Codec missing or unavailable. Paragon HFS + is used to manage the disk formatted HFS +. I copied the data to a disc formatted NTFS before use.

  Research, I gave the following indications:

  I tried to play in Quicktime and Quicktime said that I would need additional software to play the .mov file. But I could run the detective movie and it shows "XDCAM EX 1080i 50 (35 Mb/s VBR).

  VLC plays (!) and says it's a "video Mpeg 1/2 (xdvc)"

  MediaInfo said "MPEG video (XDCAM).

  The sound is PCM (L) according to inspector mov programs.

  The MPEG2 format seems to be supported by first (also in HD), forum entries tell me that I should be in version 5.0.2 as it Adobe supports the MOV container. So now my question: what am I missing?

  I have no idea on the camera used to film, but it could be a JVC, as it says that the JVC writes mov files.

  OK, let's go:

  1. Get an accumulation of static electricity of FFmpeg here: FFmpeg Windows builds of HawkEye. The 32-bit version is fine.
  2. Open the file from archive downloaded and go to the folder "bin"; ffmpeg.exe extract to a folder containing your SBDAs.
  3. Create a new text document in the folder with FFmpeg and the media, called 'mov2mp4.bat' files by making sure that you change the .txt extension to. bat.
  4. Open the text document and paste the following text:

     @ECHO OFF
     for %%a in (*.mov) do ffmpeg.exe -i "%%a" -vcodec copy -an -f mp4 "%%~na".mp4
     

  5. Save the document (even once, ensuring, it has a .bat extension), double-click it in the Explorer. The batch file runs and every MOV in the file processing and repackaging it in a MP4 container. It is lossless (there is no transcoding) and should go relatively quickly. Note that this is not also copy the audio, so you do not have the video files only. The resultant MP4s will perfectly be important in first.

  Let me know how it goes!

• Why is-Premiere Pro CS5 slower on my system than Premiere Pro CS 4?

  I just upgraded Production Premium CS4 Production Premium CS5.  Have Windows 7, 64 bit OS, 9 GB ram,

  Processors Intel quad I-7 (over clocked to 2.90 ghz) 2.67 with hyperthreading.  I have nothing of any real substance

  running on my system in addition to Adobe.  I've just loaded in a ton of DVC PRO HD 60 images and am editing 30 minutes

  program.  Once I am in Adobe first Pro CS 5, it works quite well, everything works well in real time.  However, the time

  I click away from Premiere Pro as on my desktop, then try to click back in the Premier Pro, my screen goes white, Premiere Pro says

  "do not answer" in the title bar and everything freezes for a solid minute.  4 CS do not at all.  Anyone know what is happening?

  Eddiem TKS.

  The goal is to help and solve problems for all parties involved so that we can all be more productive.

  I never said or implied at all this:

  To say there is no problem with CS 5 software is just ignorant happiness and to be honest, deteriorate distorted.

  So... I'll put this another way for you then.  I will not have any issues that you and Sacha face with P2 files in particular.

  They review they rank, export etc...

  I have an ongoing project that has 54 GB of mxf source files.  Not a question that sounds like something that you mentioned above.

  It's a lot of files or a large project... I don't know compared to your projects... but combined with mixed graphic files more seq TIFF and tgas, wavs more notice of AEFX... it certainly adds to the top in my system.

  My material is not super computer. This is not even a system RAIDed.

  Must report... I go really far, or, to and from something else that applications of the Adobe Suite in my Suite CS5 but often many of them are open at the same time.

  I had a system glitch that caused 'go a little sleepy' apps, when left UN attended.  It was an advanced power management framework. (some what hidden)

  I also have a NAS, but this isn't for editing where to.  IT has Media Junction in my configuration between suites for the file archive and transfer only.

  Re: Why is-Premiere Pro CS5 slower on my system than Premiere Pro CS 4?

  My experience is that I said previously.  CS5 is much faster than CS4.  I suspect that many others have a similar experience to mine.

  So the question you guys are seen as being a little more unique to yourself.

  Good luck

• Premiere Pro CS5 Production Suite: can only transcribe English?

  I have CS5 Production Suite in German language. Unfortunately, I see only an option transcribe in English

  schould I install an addon or how aktivate other languages? (I need German!)

  Thank you!

  Get them here:

  discourse analysis | Adobe Premiere Pro CS5

• Could not import the video MP2 for premiere Pro cs5

  HELO I am trying to import a MP2 for first cs5 and I get a sequence of just the audio.

  How can I fix?

  You are using the trial version?

  Premiere Pro CS5 and CS4 trial version limitations

• Premiere Pro CS5 Scripting Support?

  Supports Premiere Pro CS5, extendscript, or any other scripting language script?  I see it as a target application in the extendscript Toolkit, but I don't see a place in Premiere Pro to run scripts.

  Thank you

  Devin

  You can script in first with extended script, but it seems it is not officially supported. No manual or using, for example, etc. I hope it will be soon.

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• I have Premiere Pro CS4.  I need to uninstall and reinstall.  If I have just the serial number is sufficient to reactivate my CS4?

  I have Premiere Pro CS4.  I need to uninstall and reinstall.  If I have just the serial number is sufficient to reactivate my CS4?

  You do not have need your original installation disk, or download

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

• New version of Premiere Pro (CS5.5) - that is how much faster?

  It seems that it is a new version of first Pro CS5.5 now,

  See:

  First Pro CS5.5 is here...

  One who has executed the PPBM5 using the new software, please post any pre/post results of upgrading CS5.5 comparison you might have. Surely I'm not the only one wondering how fast this new version is!

  Thank you

  Jim

  The problem is NOT CS5.5 (although not directly) it's the way we had built PPBM5.  If you take a clip of your choice and encode MPEG2-DVD, you will find that CS5.5 is faster than the CS5, here are a few figures of 3 second 1 minute full AVCHD clip with color correction made four different ways with all the same presets on my fast machine

  Direct Export first 5.0.3 174 seconds

  Through the sequence of import SOUL 5.0.1 142 seconds

  Direct Export first 5.5 seconds 103

  Import sequence through SOUL 5.5 seconds 96

  You see it's 5.5 first which is faster.  We think we know what the problem is with PPBM5 but don't know how to handle it without essentially invalidate all current non - 5.5 partitions (in other words, we will have to have a separate test and results page) whenever a new version of first pulled in the past, we had to make changes and start all over again.

  Post edited by: Bill Gehrke

  Well, you can see that evil and I are not in full sync or maybe there's a possible difference between quad-core (band) and hex-core (Bill) or who knows what?

• After effects and Premiere Pro CS5?

  Hi guys,.

  I'm quite new, I've only done a videoproject and it was in Premiere Pro CS4. Now, I have a new machine and have the two first Pro CS5 and Adobe After Effects. I started to learn the AE in some videos and it's quite impressive what you can do.  So I hope that I can use AE to improve my videos.

  My question is, will I do the project in PPCS5 and then connect to EI to make special effects on clips or I'll do the whole project in After Effects?

  If I choose to AE for the project, I'll miss certain features of Premiere Pro?

  Thanks in advance!

  Sven

  It depends on what you do in your project. I did pieces that have been entirely graphic animated started in AE, then went to the first. However, if you do a science fiction film, you should start first then go to AE.

  I very rarely would export a clip of first use in AE. There are ways much, much easier to work with Premiere and AE. You can use dynamic links, which some people like. You can also import a project into AE and it comes as a composition with all your video files as layers cut and everything. Here is a page with more information.

  As someone new to AE, I highly recommend you , start here.

• Premiere Pro cs5 stops loading at ExporterQuickTimeHost.prm

  If I have this week, I tried to use a new USB microphone.  After that connection I tried to first Pro CS5 and EVERY TIME it crashes when loading the ExporterQuickTimeHost.prm on PP. logo

  I read it is a problem with the firewall, but I checked my firewall Windows 7 and NONE of my Adobe programs appear on the lists of what is / is not allowed to cross the wall.  I even tried to disable Windows Firewall and it still frozen when loading.  I had this before years ago and I think a corrected system restore, but my point of restoration before the issue has been corrupted and I'm stuck.

  Many technical suggestions aren't going to help because I am very limited in my computer expertise (pretty much knowing that where the "Start button", is my limit).

  But could you recommend what to remove or install I would appreciate?

  Re-installing Premiere Pro would be the best solution?  I don't have the installation disk so I need to get a new copy.

  Any help would be appreciated.

  Thank you

  Yes.  I have AVG.

  Hello

  Please disable or uninstall this software. Here you go: https://helpx.adobe.com/premiere-pro/kb/avg-quicktime.html

  Thank you
  Kevin

• Moving files from first elements 8 PC for Premiere pro CS5 for Mac

  Hi, I am a new user of Creative Suite CS5 Production Premium on a Mac and I'm trying to open some of my unfinished projects of video from my old computer with Premier Pro. My old computer is a PC and I had been editing HD with first Elements 8 images, but I now have an equipped MacBook Pro which is much more suitable to what I was trying to do on my old computer, and I'd rather finish my projects on my new mac rather than on my old computer.

  I exported my workspace for the videos and the file of the elements, I was working on in folders and them moves on my Mac's hard drive. I read that first Pro CS5 automatically converts files of items when they are open, however, I get an error message about how they are files of a PC version of the elements and cannot be opened. My question is, is it possible to convert PC files first elements 8 into something that can be opened on the first Pro CS5 for Mac?

  PrE is only available for the PC. Unfortunately, there is no compatibility between PC GER (PREL) and PrPro on a Mac project files.

  It was the same with files in project PrPro 1.0, 1.5 and 2.0, because they were PC only and there is no Mac version, up to CS3. The only solution was that could get a friend on a PC with the CS3 version to open/import the PrPro 1.0-2.0 projects inside, let it convert and then make a Save_As. That the resultant project COULD be opened/imported in CS3 Mac. Compatibility is with PrE8 and CS5 - PC.

  Your choice is:

  1.) export rough-edited pre on your old PC files and then import those as assets, to finish editing

  2.) find a friend with CS5 - PC, import/open these project files PrE who, not a Save_As and then move the files to your Mac project

  3.) finishing editing on the PC

  Sorry for the bad news, but good luck.

  Hunt

• Blu - Ray back to premiere pro cs5

  Hello

  I'm new to this forum, I am experienced enough in PP, even very experienced in Photoshop CS5 and all. I made my own videos, retouched and burned in Blu - ray. I would now like to put all my videos for the past 6 years on a drive hard but only have DVDs. How can I write them back to Premiere Pro please. I have not all clips either and no media cache files.  I would be grateful if you could help me in the form of points please.

  Thx a lot.

  Rose

  Copy disc to disc hard and tear the m2ts STREAM.

• Installing a version of Premiere Pro CS5 without being able to unregister it?

  I got a version of CS5 of Premiere Pro (Mac) (updated for CS4 for Windows) that I couldn't turn it off because my laptop broke, how I install on a new system?

  Whenever I try to download and activate it, he rejects me any type of access and says missing an older file (I guess than the CS4?) "But it was a version of windows, I have never installed by CD on my Windows PC). I have improved the CS4 via a Web download on my Mac.

  Thank you

  Please check the steps mentioned in: https://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

  Here is the link to contact customer service