What's really ORACLE_BASE for?

Similar Questions

• What drivers are REALLY necessary for the 230 x?

  Hi guys,.

  I recently bought the 230 x - it's great. I also bought an ssd with it and replaced defaultt with the ssd hard drive and did a clean install of Windows 7.

  I have 2 questions:

  -the drivers are REALLY essential for my device? Visualize the page drivers, there are a LOT of drivers that can be installed, but I think that some of them are not really necessary, because I don't want to slow down my superfast x 230.

  -are there a way to download all THE drivers both in place one by one?

  Thank you in advance,

  Mustafa

  Hello and welcome,

  I can't tell you which drivers necessary for what you want to do, but the best way to get them is to install ThinkVantage System Update.  Run it and it will present all the appropriate drivers for the download and installation.

  You can review the details of each before you download and decide which ones you want.  Only, check the box for those that you want and let TVSU download and install to a slap.

  [edit] It is a pure opionion, based on nothing else than my preference: I'd rather live with the installation of Lenovo for awhile and see what I like - and then uninstall the stuff I have not.   IMNSHO, the initial indigestion is not that bad on a ThinkPad.  OTOH, depending on the size of the SSD, a clean installation may be the way to go.

  Z.

• I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  I work for an organization not-for-profit, and I wondered what might be a plan of this organization to use? Really looking for us in the first but are interested in the complete set of CC.

  Please see this link

  Non profits

  If your institution not-for-profit or charity meets the conditions above, you can browse the education of Adobe software versions. Once you are ready to buy, you will be asked to present evidence or your qualification status when ordering.

• What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  I clicked on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Hello

  I'm a bit confused. Your title says
  

  What did you do for Firefox? I don't have the left arrow key or arrow - I can't type in the url box - Firefox has suddenly become USELESS!

  Yet your said OP
  

  Click on 'Customize' as you suggest, am the arrows and the area url, you click on ok, and everything is back to what I had already. I know, except for a really quick fix, I have to go back to IE.

  Your problem is resolved or not?

  Right-click on an empty space in the toolbar, then click Customize, then click restore default value

• In Internet jargon, what is really "LIGHTNING SPEED" which is announced on the radio?

  original title: WHAT is "LIGHTNING SPEED"?

  In Internet jargon, what is really "LIGHTNING SPEED" which is announced on the radio?  It means a lot faster download of long Hollywood movies, for example, compared to cable Internet? In terms of Mbps speed as 'LS' would be compared to Internet cable?  What compared with WIFI at a speed of 54 Mbps and 'Excellent' the quality of the signal? If need me a second or two to go to the Google search engine on Wikipedia site by clicking on the result, how much more quickly than it would be "lightning speed" be?  When I'm at the local library or at a Starbucks I noticed the quality of WIFI signal from my laptop (Windows Vista with 250G of space available 300 and 3G of RAM) to be very good to excellent and the speed of 36 Mbps or higher.  It takes about 1-3 seconds to go from site to site search engine.  How fast is the Internet cable in comparison? I know, DSL is slower, and dial-up poor crawls less than 56 Kbps.

  Thank you very much for all the world and all those who made efforts to give me a clear understanding of the "LIGHTNING SPEED" function of the INTERNET SPEED CABLE against the very-good-to-excellent quality signal & 36 Mbps or more WIFI SPEED.
  Thank you very much.
  Joe
   

  Hello

  The term of lightning speed differs from ISP to ISP. There is no certain download or upload speed which is called lightning speed. It's the same that to get good bandwidth to get higher download and the upload speed.

  Even the cable Internet high speed can be addressed as lightning speed. WI FI connection speeds are to your LAN (Local Area Network). A WI - FI router is unable to go beyond the speed provided by your ISP.

• MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

  MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

  Read this: upgrade Windows 10 Dell Latitude D610

  Take a look at my answer, complete instructions.

  Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

  However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

  If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

• What are the specifications for an inspiron 3000 11 touchscreen?

  Myself and others have on a mission to find a stylus that works with this 2 in 1 and so far not had much luck.  The squishy tip pen that I got for my phone does not work.  One of these somewhat new metal stylus with the small round disc on the end works fine on my phone, but not on the inspiron with or without a screen protector.  I had an active stylus for motorola with a battery that someone suggested, it does what intermiittingly but I guess the fact that it works at all should give me some hope.  What are the specifications for the touchscreen on the 3135?  I read that a thick cover as glass can affect if the pen works or not as well as screen protection.  I found a couple of stylus that claim to have the adjustable power so they should work with coatings of glass and screen protection.  Pen digital universal Adrien, adjustable overdrive and navitech are all meant to be active stylus which have two power settings.  I asked in the faq, but nobody can say if it works on the inspiron and the manufacturer says they have not tested either.  While I hate to spend 30 dollars on something like that without knowing that it will work 100%, I ordered one of the navitech off amazon because I can go back if I want to.  I poured everything I can find on this machine, but nowhere does anyone give any details about the touch screen.  I know that this is not intended to be a stamp artist drawing or anything other than the simple ability to interact with small buttons on the screen or the digital signature casual or simple drawing hand is the main reasons I want a small pen tip.  Don't get me wrong, I really enjoy this machine, but I don't understand why material for touch screen specifications seem to be such a mystery tech dark and deep.  This is perhaps because Dell has more than one supplier... I guess it could be both one reason than others.  Even if we can talk only about basic general information is probably more than I've found so far.

  Your S3 screen with a digitizer.  Your laptop screen does not work.

  Essentially, a laptop a scanning screen is also called "tablet" and - for systems or more 12 "inch screen size, will sell for a minimum of about $800-900.  About lowest price will be a simple touchscreen - not a digitizer.

• What metrics to use for memory capacity planning? Active or consumed (in request or use vROPS)

  Hey all,.

  I was wondering once more what metrics to use for memory capacity planning. Since the information from different sources (for example your ESXi host needs more RAM to Iwan Rahabok or VMworld 2012: Session VSP1729 - virtualized memory understanding performance management - Eric Sloof - NTPRO.NL Kit Colbert) pointing all assets (vROPS request), I expect that when we have high memory consumption / use in vCenter there will be no balloon / compression / permutation.

  Also the metric active / request should not be used for all workloads (e.g. Java / DB), why is - this? I have not found the reason of this anywhere, only the fact.

  Other sources such as Mark Achtemichuk suggests using consumed/use, which is the opposite (Understanding Active Memory - VMware vSphere Blog - Articles VMware vSphere).

  So I thought I'll with active / demand as metric and ignoring the warnings inside of vCenter.

  But the last time we have fixed half of our group, we had consumed/high memory usage and the vCenter began to inflate, compress, and finally to Exchange. Not a lot but I had not expected that, because memory active was only a small percentage of consumed.

  Can someone explain to me why this happened and who is right on this issue.

  Kind regards

  jengl

  jengl I don't know if you asked the wrong question, or I give the wrong answer :-)

  It is always good to attach screenshots, background to the issues, and what exactly you are trying to solve.

  You wrote:

  So to summarize:

  -ESXi uses consume to decide when to start the recovery techniques of memory RAM

  -To rightsize VMs for RAM, you must use the counter inside the BONE, not active

  -If you do not want to commit too much RAM and have a lot of the balloon you should right-size your virtual machines or extend the RAM / buy additional servers

  Please correct me if I'm wrong.

  My answer: you are right. If you do not have access to the guest operating system, then Active VM and VM consumed are better guess. Better than nothing :-)

  Sizing sizing of VM and ESXi are 2 different things (2 use cases) different. Please don't mix up the as soon as they are confusing. Do not try to resize the virtual machine when you are sizing the ESXi, unless you have a control total on them.

  You wrote:

  The question for me is: how many cache (standby under Windows) inside the VM is really necessary for the virtual machine to get the best performance without wasting resources. Perhaps this issue can be resolved only by tests or do you know another option?

  My answer: it's a different topic brother :-) It is different, because it is within a guest operating system (Windows in this case) and is no longer at the level of the ESXi. Suggest that post you another, possibly under Windows or vSphere too :-)

• What I really need to buy more FEPs in the clowd to update my creative cloud, my free space I s complete, I am now froced to pay more to use my programs?

  What I really need to buy more FEPs in the clowd to update my creative cloud, my free space I s complete, I am now froced to pay more to use my programs?

  Hi TinEriksson,

  CC cloud offer free space 2 GB, but if you bought the subscription for one of the CC app you'll get 20 GB space cloud until you have the subscription.

  So, if you need more creative space Cloud you must subscribe.

  Kind regards

  Nicos

• What are the reasons for blocking a thread?

  There is a question in the PL/SQL forum, that as is often the case, is not to the point. I asked for more information, and the OP provided. Now, I know what the OP really intends to ask, and I can answer.
  
  Or at least I could answer, except that the thread is now locked: ' this thread is locked - replies are not allowed. " According to the FAQ, this means that a moderator has locked the question. But why? Why block this issue and not the other threads of the same buggy? If the lock is due to an offence on the part of the OP, why not just delete?
  
  In short, why hang on to a question without a question? Is it zap and slightly reduce noise in the forum, or unblock and allow for a response.
  
  At the very least, a policy of blocking issues without apparent reason or explanation undermines the role of contributors.
  
  Cheers, APC
  
  P.S. [url https://forums.oracle.com/forums/message.jspa?messageID=10025314#10025314] here's the thread in question. OkF
  
  ---------
  
  Follow-up: I noticed that the user has at least another locked thread. So maybe there's something in their behavior that deserves imprisonment? But they have other threads that are still open. So, my main point remains valid: what are the reasons for blocking a thread? Why not just ban the userf and or delete questions?
  
  Published by: APC on December 11, 2011 16:48

  Gasparotto N wrote:
  I see, but as Andrew said, there is no evidence in the taken only a single thread without going through the history of the user all the.

  Nicolas.

  Agreed. If I block a thread, then I often put a message to say I'm locking it and the reason why and possibly a link to other threads of the same question if it's because of the duplication of the op.
  It is not that often that I have lock son well.

• Body, SOUL, and CUDA: what is really going on here?

  I bit the bullet and picked up a new Quadro 4 K for my Mac Pro.  The videos we do with Premiere Pro will include a multi-cam small-scale, PiP CUDA processors may help clear with.  However, I am a little puzzled by something: what is really going on here behind the scenes, so to say?  I can't to this question from the point of view software/computer geek, a montage of a video.  I am sincerely interested in what happens between body, SOUL and the nVidia card.

  First of all, I asked this question in July.  At the end of the thread, Todd said that if I have the tail export with the SOUL, then the rendering would be done by the CPU.  Very good, but something happens with the SOUL and the nVidia card.  If I enable the GPU in the body and then export it through the SOUL, the newspaper of the SOUL looks like this:

  -Source file: Volumes/users/jvp/Library/Caches/TemporaryItems/Multi-Cam Test.prproj
  -Output file: /Volumes/Users/jvp/Desktop/multi-cam_1.mp4
  -Preset used: Custom
  -Video: NTSC, 1920 x 1080, 29.97 FPS, out interlaced
  -Audio: AAC, 160 kbps, 48 kHz, stereo
  -Bitrate: VBR, 1 pass, target 6.00, Max 10.00 MB/s
  -The source is désentrelacée
  -Encoding Time: 00:20:09

  If, however, I disable the GPU in the body and export the same sequence by SOUL, the paper reads:

  -Output file: /Volumes/Users/jvp/Desktop/multi-cam-no-cuda.mp4
  -Preset used: Custom
  -Video: NTSC, 1920 x 1080, 29.97 FPS, out interlaced
  -Audio: AAC, 160 kbps, 48 kHz, stereo
  -Bitrate: VBR, 1 pass, target 6.00, Max 10.00 MB/s
  -The source is désentrelacée
  -Encoding Time: 01:18:32

  A notable difference in time.  In addition, during the first export in the SOUL, the GPU is definitely used to about 33 percent or more.  Clearly, it's something.  What I'm curious to know is: what?  It is the rendering of the PiP while SOUL exports video?  Or...?

  JAS

  It is the rendering of the PiP while SOUL exports video?

  Yep, it's what he does. Steve Hoeg, one of the engineers of Adobe that works on this kind of thing, mentioned in a recent thread that exports pending SOUL of Premiere Pro and material while MPE/GPU acceleration is enabled will take advantage of GPU acceleration. It's a good Thing (tm).

  I don't remember where the wire is where Steve mentioned that, but Todd actually had it wrong in this case. That's fine, since we were all working in the hope that Todd was really the situation. That is why it is so big, when the propellerheads (I say that with affection) pop here and the value of the record straight.

  Bottom line: you get exactly what you paid for--actually, maybe more!

• What is reasonable memory for Firefox use?

  Title says it all-

  What is reasonable memory for Firefox use?

  The normal use, I am an average of 1.2 G or about memory (of 16 G total); is this normal? Don't not maxing out at all but I was wondering.

  How to define and measure the use of memory for Firefox? Activity monitor? I use Firefox to write this. In the activity monitor, I see Firefox to 347 MB and Firefox Web Content to 259 MB.

• What do need me for when the sale of an iPhone that won't turn on in order to remove my information?

  What do need me for when the sale of an iPhone that won't turn on in order to remove my information?

  If it lights why if someone buy it?

• What is the procedure for upgrading Thunderbird ESR 17.0.7 at 31.6 on Mac OSX 10.10.2?

  What is the procedure for upgrading from Thunderbird ESR 17.0.7 at 31.6 (last public version) on Mac OSX 10.10.2?

  Is it as simple as install new version and then run to see all local folders and my email and its folders from IMAP to my company as before the upgrade?

  Thank you

  Create a full backup of your Thunderbird profiles folder.
  Uninstall the old version of ESR.
  Download the latest version from https://www.mozilla.org/en-US/thunderbird/all.html and install it.

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.