What should I do to open the files compressed, Windows 8 come with Winzip or similar?

Similar Questions

• I have a new computer and try opening PDFs from other web sites. They are not open. What should I do to open these files?

  I have a new computer and try opening PDFs from other web sites. They are not open. What should I do to open these files?

  Thank you for your help, but I thought about it.  It was very simple & silly, something I would have thought from the outset. I had to add permissions to the pop-up blocker. Silly me had a "blonde moment"... no offense to blondes, just using the cliché. Laughing out loud!!

• Can what program I use to open the files PLX?

  Original title: PLX files

  Can what program I use to open the file in a readable format PLX?

  Hi Truman,

  I understand that you want to open the PLX files.

  Executable program written in Perl programming language; often used for Web applications that are running on a Web server. You can open them using the following application.

  Microsoft IIS with PerlIS.

  I hope this helps.

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• When running defrag, error "MMC cannot open the file c:\WINDOWS\system\dfrg.msc.

  When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.

  Hello

  I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
  Thank you

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• Cannot open exe. files without pop up asking what program to use to open the file

  My PC has been infected! I have Windows XP. When I try to open any exe. file, I get a pop-up window asking me what program to open the file with. Any suggestions on how to fix this problem myself?

  Hello
  This problem occurs when your .exe file associations are broken. This is usually caused by malicious software that changes the default file associations in Windows. Follow these instructions to resolve this problem:
  Then try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• What should I do to open PDF files in Microsoft Outlook?

  The files are currently encrypted.  I have uninstall and reinstalled Adobe Reader 9.0 three times in Windows XP.

  Have you confirmed that the drive is open the file?

  Looks like it is open a Word (or another application).

  If this is the case, you need to associate PDF Reader. In XP, you can right click on a PDF file, choose "open with > choose program, select Adobe Reader and click on the box that says"use selected program to open this type of file. "

• Problems to open the file in Windows Moview Maker

  I work on a Windows Movie Maker file last week, upload music, photos and video clips and count the final transitions. Never had a problem opening the classified. Today, the file will not open. The answer I get is:
  "The file was created by a version of Windows Movie Maker that is not supported." Why is - what happens after 6 days of work on this project?

  I worked on a Windows Movie Maker file last week, upload music, photos and video clips. I'm almost done with the project and start the final transitions. However, today, I was not able to open the file. The answer I get is: The MSWMM was created by a version of Windows Movie Maker that is not supported. "Why is - what happens after 6 days of working on this project without any problems. Please please help.

  =======================================
  The project .mswmm file seems to be corrupted. I feel
  you have to start over.

  Large, complex projects tend to cause problems... the best bet
  would be to create several small projects, Publishing (economy)
  each of them in the format .wmv movie to a folder on your hard drive
  drive and then re - import clips video .wmv collected and
  combine them into a final video file.

  Or... import clips .wmv in creation of DVD and each Let's
  become a scene (chapter), you can have up to 18 scenes.

  FWIW... many file formats are would have been compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• cannot open the file in windows Explorer

  Hello

  Double-click an InDesign file in Windows Explorer does not open the file

  He then shows the window of InDesign, but nothing opens

  Anyone know what this may be?

  2015 CC running on Windows 10 pro 64-bit

  Thank you
  David

  How to move the script to the user profile?

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• What impression Firefox does not open the print dialog window

  When printing to our office, we often print on several printers, not just the default printer. When you print in Firefox, however, printing is automatically sent to the default printer and I do not get a print dialog window. I reset the options Firefox of the printer, change the file prefs.js and started Firefox in safe mode to check if an add-on affect printing - all about nothing done. When I print from Chrome, or (shudder) Internet Explorer, I get a dialog box send me options of the printer. Your help and your responses will be appreciated.

  There is a hidden preference to work around the dialog box, but it is certainly not defined by default. To check that:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) If you find a preference named print.always_print_silent there is your trouble.

  Next question would be, where it comes from? A few possibilities:

  (A) a user.js file that overrides prefs.js at startup. See: How to fix preferences that will not save.

  (B) a file lock in the program folder. See: http://kb.mozillazine.org/Locking_preferences