What size of database can support ten times to the maximum?

Similar Questions

• I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard?

  I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard? I know that the my processor can handle up to 16 GB of RAM, now I have installed only 4 GB of RAM (original), but I want to update to 12 GB of RAM. I want to know if my motherboard can handle?

  I have received and read your private message. Yes, you can install 8 GB + 4 GB (current module). They will work at 1600 instead of 800 MHz (single channel). You will see the difference!

  Here are the compatible memory modules:

  • Crucial
  • PNY

  If you have the budget, I recommend buying a set of 16 GB (2x8Gb).

• What type of CPU can support the FMLE3 to encode to h264 format

  The Signal is yuv or pcm data stream, I use the fmle3.0 for encoding in h.264 format.

  Once started.the CPU price of public services will go up to 100%.

  I want to know, what kind of CPU can support the live stream.

  In other words, my requirement is encoding a live stream that the price of public services of cpu is less than 30%.

  Here are the system requirements:

  http://www.Adobe.com/products/flashmediaserver/flashmediaencoder/systemreqs/

  Other people may have real experience to share...

  Jody

• What size and where can find replacement for the 70-200 2.8 L IS lens screws?

  Three of the four live in my 70-200 2.8 L IS lens magically disappeared the same day... I can't find anywhere online, what size they are. I can't afford to send the lens in the Canon - I don't know if I can find the screws, I'm able to screw, lol.

  The screws in question are the in the ring closest to the camera body. Attached photo for reference. Thank you!

  

  http://www.USCamera.com/ef70200-28lis.htm

• Pavilion 6715f: what size power supply can I put too. Flags of HP p6715f

  I would like to know what size power supply, I can go too and if a standard atx power supply will work.

  The upgrade and maintenance Guide
  http://h10032.www1.HP.com/CTG/manual/c01835715.PDF

  NOTE: The ATX Standard PSU is 86 mm height; Width 150mm; 140 mm in length (ATX12V version 2.3 March 2007).
  Third party PSU manufacturers extend the length of Dimension (150mm to 200mm) of high power PSU.

  MEASURE your clearances (for the son out of DC power in case) berries CD/DVD media at this level in case, just in front of the PSU.
  You will find some ATX compatible (140 mm in length) up to about 600 Watts PSU, 160 mm is common with more than 600W POWER supply.

  IF you are thinking of the future motherboard swap (Haswell or higher), make sure your power supply is compatible with the new C6/C7 (Haswell/Broadwell) mode.

• If you use SSD what size minimum, you can use I'll just install the softwar winds 7 operation and put all the other programs on a hard drive Sata is the way it should be done?

  I'm building a new PC, I have the motherboard and it has a location for an SSD, this who has the ability of minium are? and if this store just drive the sofware opererating only, as I intend to have all my programs and data on a SATA hard drive is the way to corect to go? Could someone ' a please advise please.

  The minimum I recommend is 80 GB, if you can go for 128 GB to 160 GB, I would go for it.

  Windows 7 uses 10 GB of disk space, and you have to take into account future, Service Packs and updates.

  You must also consider your page file size that will depend on the amount of RAM you have installed.

  Other disk space requirements include your programs and hardware drivers.

  The benefits of having an SSD is to accelerate the performance of the operating system and applications. In order to have a just installed SSD for upgrading the operating system on a mechanical HDD as well as your programs wouldn't make sense. Store content or data that you create on the HARD disk.

• How can I add time to the process of starting to slow down a host to start?

  I have a problem with some boxes where the external storage device takes some time to complete the rotation upward all the readers and the host of complete starting before that the storage device only.  So the vm out there are not accessible unless I restart the host.  In Windows, you can add start menu time to stop the BONE to get through his post.  How do I Linux to accomplish the same thing?

  -Pete

  Edit the file/etc/grub.conf.

  By default, there is this line:

  Timeout = 10

  André

• What views of $ v can I use to monitor the parallel process?

  Hi all
  
  The version of DB is 11.1.
  
  I ran a sql in parallel. And I got the SessionID for the session.
  
  But when I referred to v$ px_session, v$ px_process or sql_monitor $ v even with this session id, I have nothing from these points of view.
  
  The exectuion plan showed that it used parallel exectuion.
  
  Could someone tell me what is the problem with my approach? Or it means that my sql has not used the parallel at all?
  
  Best regards
  Leon

  PARALLEL_MAX_SERVERS to 0 for the database instance. Confirm that there are no PX processes running on the instance of database (these would be process "ora_p0xx_SID", where xx is 00 to 99 (or 128)) on the server.

  Then set PARALLEL_MAX_SERVERS to 8 or 16 or more.

  Run your query/dml.

  Now, see if the ora_p0xx_SID process has created.

  Hemant K Collette

• Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database. can you please explain, where the value in frontend comes? It differs from the flow_status_code in oe_or

  Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database.

  Where the value in the frontend is filling?

  It differs from the flow_status_code in oe_order_lines_all?

  Thanks for the correction.

  He slipped right out of my mind!

  Here is a detailed explanation of this case:

  Status of orders picked and picked partial

  Kind regards

  Bashar

• Database is suspended three times with the exact error

  I join alert log and we have open ticket with oracle. We have 6 Group of redo with 2members (500 mb)
  
  Thread 1 cannot allot of new newspapers, sequence 12457
  Private stream flush is not complete
  Currently Journal # 3 seq # 12456 mem # 0: + REDOA/test/redoa_test_3
  Currently Journal # 3 seq # 12456 mem # 1: + REDOB/test/redob_test_3
  Thread 1 Advanced to record the sequence 12457 (switch LGWR)
  Currently journal # 5 seq # 12457 mem # 0: + REDOA/test/redoa_test_5
  Currently journal # 5 seq # 12457 mem # 1: + REDOB/test/redob_test_5
  Wed Mar 06 22:34:17 2013
  Archived journal 26537 extra for each sequence 1 12456 0x35b60d17 dest ID thread entry 1:
  Wed Mar 06 22:43:29 2013
  minact-SNA: useg scan slip on with error e:12751
  Wed Mar 06 22:48:38 2013
  minact-SNA: useg scan slip on with error e:12751
  Wed Mar 06 22:53:19 2013
  ERROR: Impossible to standardize the name of the symbol for the short stack (at offset
  (139):
  dbgexProcessError () + 176 <-dbgePostErrorKGE (+ 1348) <-() + 48 dbkePostKGE_kgsf <-kgeade)
  ) 640 <-kgerelv () + 240 <-() + 80 kgerec4 <-kjdgpstackdmp () + 892 <-_ $c1A.kjdglblkrdmpint)
  + 216 <-ksikblkrdmpi () + 240 <-ksqgtlctx (+ 9760) <-() + 800 ksqgelctx <-kcc_get_enqueue () + 5
  44 <-kccocx () + 716 <-kcc_begin_txn_internal () + 76 <-krsa_cftxn_begin (+ 2752) <-krsj_cle
  ar_gap () + 760 <-krsg_clear_gap () + 348 <-krsg_gap_ping (+ 21576) <-krsg_ping (+ 1892) <-kcr
  rwkx () + 6048 <-kcrrwk () + 1560 <-ksbcti (+ 1368) <-ksbabs (+ 1556) <-ksbrdp (+ 1616) <-opirip)
  ) + 1680 <-opidrv () + 748 <-sou2o () + 88 <-opimai_real () + 276 <-ssthrdmain () + 316 <-hand () + 31
  6 <-_start () + 380
  Errors in the file /ora/ADMIN/test/diag/rdbms/test/test/trace/test_arc2_4628.trc (i
  preloaded = 188103):
  ORA-00494: [CF] enqueue for too long (more than 900 seconds) by ' inst 1, os
  ID 3922'
  
  ORA-00494: [CF] enqueue for too long (more than 900 seconds) by ' inst 1, os
  ID 3922'
  Incident details in: / ora/ADMIN/test/diag/rdbms/test/test/incident/incdir_188103
  test_arc2_4628_i188103.TRC
  Wed Mar 06 22:53:48 2013
  minact-SNA: useg scan slip on with error e:12751
  Suspension of action 'Block Cleanout Optim, Undo Segment Scan' MMON for secon 82800
  DS
  Wed Mar 06 22:53:50 2013
  Killing blocker enqueue (pid = 3922) on resources (pid = 4628 CF-00000000-00000000
  )
  by killing session 781,1
  Killing blocker enqueue (pid = 3922) on resources (pid = 4628 CF-00000000-00000000
  )
  by ending processes
  ARC2 (ospid: 4628): put an end to litigation because of the error 2103
  Wed Mar 06 22:53:50 2013
  System dump State requested by (instance = 1, DiSo = 4628 (ARC2)), summary = [abnormal
  termination of proceedings].
  State of the system dumped to trace file /ora/ADMIN/test/diag/rdbms/test/test/trace/TEST_diag_3797.trc
  Instance terminated by ARC2, pid = 4628

  Check
  Grave database fails with ORA-00494 [ID 753290.1]
  ORA-00494: [Cf] Enqueue held for database too long causing the crash [ID 1101862.1]

• can what size hard disk I mount in a computer hp Pavilion ze4410ea laptop?

  What size of disk can be mounted in a HP Pavilion ze4410ea?

  Hello:

  You'd be safe with a 80 GB IDE HDD to 5 400 rpm.

  Definitely, do no more than 120 GB.

  Paul

• Satellite M70-192: what modules of RAM can I use?

  I would like to know what type of RAM I could use with my M70-192. I need to add another 512 MB module. So, for example is compatible kingston more or Micron or what?

  I can't find Toshiba around the House me...!

  Hello

  The unit uses DDR2 memory strips and you can use this module:
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  What you can do is google for this module, or you can order from the Toshiba service partner.

• The maximum size of the default packages in 3.7.0.1

  Hello
  
  Looks like there is another reason to do a full restart of cluster to apply the first patch for 3.7 (3.7.0.1). On a machine with MTU = 1500, it seems that the default maximum packet size value is passed from 1452 to 65535 and this change prevents the cluster to form during a rolling upgrade.
  
  May 16, 2011 14:08:01, Logger@813856187 ERROR 3.7.0.1 376: 2011-05-16 14:08:01.376/1.539 Oracle coherence GE 3.7.0.1 < error > (thread = Cluster, Member = n/a): this member was unable to join the cluster due to an incompatibility between this member configuration and the configuration used by the rest of the cluster. The package size maximum (65 535) for this member does not match the maximum packet size that uses the current cluster of execution. Rejected by Member (Id = 1, Timestamp is 2011-05-16 14:05:49.303, address = XXX2:11500, MachineId = 38601, location = machine: YYY2, process: 14945, members: cacheserver:1, role = cacheserver).
  
  
  May 16, 2011 14:24:27, 675 ERROR Logger@98371294 3.7.0.0: 2011-05-16 14:24:27.674/1.539 Oracle coherence GE 3.7.0.0 < error > (thread = Cluster, Member = n/a): this member was unable to join the cluster due to an incompatibility between this member configuration and the configuration used by the rest of the cluster. The maximum packet size (1452) for that Member does not match the maximum packet size that uses the cluster running. Rejected by Member (Id = 1, Timestamp is 2011-05-16 14:11:11.927, address = XXX1:11500, MachineId = 38600, location = machine: YYY1, process: 18509, members: cacheserver:1, role = cacheserver).
  
  
  Can you please confirm?
  
  
  See you soon,.
  Alexey

  Alexey salvation,

  Yes, the maximum packet size by default for 3.7 was believed to have been 65535, however there is a bug that prevented this work. 3.7.0.1 solves this problem and therefore "presents" the new default higher. A rolling restart is always possible, however, you need to manually configure the maximum to be 1468. The new maximum 65535 allows default configuration of coherence in support of large groups (greater then ~ 450 JVMs), where old default configuration would prevent new members joining and would require a reconfiguration and a full reboot.

  Thank you

  Mark
  The Oracle coherence

• Satellite A500 - 19 X - which is the maximum supported RAM?

  Hello

  I have a Toshiba Satellite A500 - 19 X with Windows 7 64 bit Home Premium edition. It came with 4 GB DDR3 1066 MHZ RAM. Can anyone let me know the maximum supported RAM for this hardware configuration and OS.

  Kind regards
  Vivek

  Hey Buddy,

  You can answer this question yourself!

  I checked the specifications of this laptop on the Toshiba site and you can upgrade the RAM 8 GB. Therefore, you (1 066 MHz) DDR3 RAM and two 4 GB modules. They should be the same manufacturing to avoid problems of incompatibility.

• HP Officejet Pro 8600: How to increase the size of larger font than the maximum on my word of laptop

  I would like to make each letter 10 cms wide for use on my design of the mosaic. Is it possible to do it on my printer as my Word program letters are too small?
  Thank you
  Meg

  Meg,

  You can definitely show text exceeds the maximum allowed in Word.

  • Open a new Word document
  • Set the Page layout > landscape
  • Select your font > set size 72 (max in 2013 Word) or anything that is the maximum for your version of Word
  • Cut the text > save as a .jpg file
  • Insert the image file in your Word document
  • Right click on the inserted picture > select the size and Position > increase the size of the image to any percentage you like

  Because the 'text' is now captured in the image, it will display as the size of the 'bigger '.

  Cutting in Windows 10 / 8 / 7: tips tricks & to capture screenshots

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.