Similar Questions

• What size power supply will fit in a case of dc5750

  I think the upgrade with an AMD Athlon X 2 5800 + processor for socket AM2 ADA5800IAA5DO 3.0 ghz, 1 MB, 2 sticks of 2gig RAM, 2 HARD drives, DVD player.

  Thank you

  dysart22

  dysart22

  I have noted that these two higher end CPU, not the 5800 +.

  AMD Athlon 64 X 2 Dual-Core 5600 + processor 2.8 GHz, 2 front bus L2 cache 2000 MHz MB
  AMD Athlon 64 X 2 Dual-Core 6000 + processor 3.0 GHz 2 X 1 MB L2 cache 2000 MHz bus front

• My iMac was bought from China, it runs on 220V power supply, can it be moved to the United States working at 110 V?

  My iMac bought from China, he works with 220V power supply, can it be moved to the United States working at 110 V?

  Electrical and operating requirements

  Voltage: 100-240V AC

  Frequency: 50 Hz to 60 Hz, single phase

  Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)

  Relative humidity: 5 to 95% without condensation

  Operating altitude: tested to 10,000 feet

  of https://www.apple.com/imac/specs/

• I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard?

  I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard? I know that the my processor can handle up to 16 GB of RAM, now I have installed only 4 GB of RAM (original), but I want to update to 12 GB of RAM. I want to know if my motherboard can handle?

  I have received and read your private message. Yes, you can install 8 GB + 4 GB (current module). They will work at 1600 instead of 800 MHz (single channel). You will see the difference!

  Here are the compatible memory modules:

  • Crucial
  • PNY

  If you have the budget, I recommend buying a set of 16 GB (2x8Gb).

• Can I put the Pavilion Slimline 180 Watt power supply to a 300 Watt PSU

  Of course, you can!

  Here is an informational videoabout the possibilities of upgrading your slimline WHAT PSU found on YouTube.  A comparison of three power supplies, including the owner HP PSU and a (two video and CPU) stress test and comparison of noise is shown during the video.

  Be aware that some, but not all, of the PSU, upgrades require a simple and light your PSU slimline support change. Change depends on the power supply model chosen for the upgrade.

  Purchase an adaptor molex as HP UPE is necessary for the Slimlines using a power supply with the format owners microfit ATX 24 pin, as well as the standard for the HTPC power supply ATX 20 pin format.

  Upgrade your power supply at a higher power will not damage your motherboard. A power supply will provide only so much power that is required of him by the mother and peripheral card up to the nominal power of the installed PSU.

  It is for those who wondered how to work around the limitation of the low power 180 Watt power supply that most Pavilion Slimline PCs come with the Assembly. With a power SUPPLY improved, more memory and a graphics card discrete, including support (it is a requirement) your Slimline can be your gaming PC.

  Selecting a graphics card is another topic. Not all graphics cards can hold in the case of a slimline. It takes a low profile video card. They are available for purchase online.

  Kind regards
  ERICO
  Published by erico on 15/11/2009 13:17

  Bravo for Erico 1,000,000,000. Great post. Debunks many myths and the hearsay rule.

• Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

  Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

  So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

  So first thing, I would like to replace:

  Replace the 2 x 2 GB ram cards default with:

  4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

  For a total of ram 16 GB with my x 64 bit PC of course

  Link: http://AMZN.to/KtMt9m (note that I buy two)

  Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

  1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

  For the graphics card + overclocking.

  Link: http://AMZN.to/IkLTdp 

  Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

  1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

  If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

  Link: http://AMZN.to/IFiEa2

  I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

  -----------------------------------------------

  Card not present upgraded

  HP Pavilion p6510f PC / Nr WW639AA #ABA

  Four cores AMD Athlon 630

  4 GB Ram DDR3

  HARD DRIVE 750 GB

  Integrated ATI Radeon graphics card...

  Power Max Power 250W

  Windows 7 Home Premium 64-bit

  -----------------------------------------------

  Thank you! ~ Of Amerindian

  Hello

  According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

  You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

  You should be able to make your own decision on whether to roll the dice.

• Pavilion p6000 series p6633w: power supply upgrade

  Is the format of p6633w and atx pavilion for the power supply compatible, I couldn't find a HP 400w PSU.  They offer a?  The power supply I found is in atx format.

  Thank you for the additional information.

  The power supply unit (PSU) is a standard ATX.  You can use any brand.  As a precaution, I suggest to measure the PSU existing and comparing measures to whichever you choose.  I love Corsair products.  In addition, a modular power supply is good for cases of average size.  You can only use the cables needed to allow better air circulation in the case.  I recommend at least 500W.  This will allow more power over the maximum use.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Pavilion HPE-310 t Power Supply replacement - please help!

  OK, so I have a Pavilion HPE-310 t, (MS-7613 (Iona-GL8E) motherboard) and I want to replace the original PSU (300 watt) for a 500 watt so I can install a better video card. I looked at the harness and they look like I can put in a general diet something like this:

  http://www.Walmart.com/IP/13812566?adid=22222222227000381035&wmlspartner=wlpa&wl0=&WL1=g&WL2=&WL3=13...

  If im wondering if the gneral supplies will fix the case... Thank you very much

  Yes, the Thermaltake TR2 500W ATX12V power supply you linked to should fit in your computer case. Also consider the Corsair CX500 and CX600. Two of these power supplies are highly recommended and are known to fit in many cases of HP computer.

• HP pavilion elite hpe-035sc: power supply wattage

  Hello

  I have a hp pavilion elite hpe-035sc

  Product number: VS311AA

  I7 870 2.9/8 GB ram/500 GB

  power supply: 460w delta electronics dps-460 DB A (it has a connector 6 power pins)

  I recently added an asus gtx 550 ti and it worked

  I'm worried about the power supply, do you not think that it is enough

  checked the power supply and I found:

  max power: 460w

  power combined 12va + 12vb + 12vc equal to 385 W (it does average?)

  THX

  It should not be any problems with the installation at all. Just do yourself the favor of not not overclocking the card.

  Delta POWER supply has enough good specs for a mainstream card like the one you have installed.

• Pavilion 500-516na: HP Pavilion 500-516NA 180w power supply

  Hi, I have a Hp Pavilion 500-516na, I'm looking to upgrade the graphics card Radeon x 360 r7 just to give you a little extra boost, but on the specifications for the graphics card it says need a 500w power supply.

  Looking at the specifications of power supply in my machine it says he only 180w?

  It would be really too low to run the entire machine and if so I think I would need food also upgrade?

  Thank you.

  Hello

  You good to go.

  You must coordinate the power requirements of the graphic replacement card with the power output on the new power supply (PS).

  Also check the measures of PS existing when buying a new PS

  A final exam is UEFI BIOS vs. You have UEFI. So the new graphics card must support UEFI, or have the ability to switch between each protocol.

  See you soon

• What size and where can find replacement for the 70-200 2.8 L IS lens screws?

  Three of the four live in my 70-200 2.8 L IS lens magically disappeared the same day... I can't find anywhere online, what size they are. I can't afford to send the lens in the Canon - I don't know if I can find the screws, I'm able to screw, lol.

  The screws in question are the in the ring closest to the camera body. Attached photo for reference. Thank you!

  

  http://www.USCamera.com/ef70200-28lis.htm

• What size of database can support ten times to the maximum?

  Masters.
  
  
  What size of database arguably ten times now? or just varies according to the size of the physical memory?
  
  I saw just ten times online docs, but I found no valuable index.
  
  
  could you please guide me in the right direction.
  
  Thank you

  As Jeremy mentioned, there is no built-in limit on the overall database size. It's really dependent on the material, mainly the memory capacity and the drive capacity/performance. We have at least a data store > 1 TB deployed in production, but encountered the most common size is in the 10s of GB range with a few in the 100s of the GB range.

  The main challenge with very large databases in memory are some of the management, before any startup/recovery operations, stop and, if you use replication, duplicate. These can take a long time to complete, even with good discs.

  For example, consider a 1 TB (1024 GB, 1 048 576 MB) data store running on a disk system RAID-0 that can maintain 100 MB/s sequential transfer rate (a midrange disk subsystem). In this case a clean boot (without recovery) will take at least 1048576 / 100 seconds = 10 486 seconds = 175 minutes = 2 hours and 55 minutes. for example, it will take nearly 3 hours to bring up the data store. If the recovery is necessary 9e.g. after a failure), then it will take more time. In a replicated environment a double operation speed may well be limited by the network (depending on the type of local network) and so a duplicate of this data store could easily take longer than 3 hours in certain circumstances (but using the--compress option and a high bandwidth LAN will help compensate for that).

  Chris

• 15-p151nr Pavilion: Pavilion 15-p151nr dead, power supply LED flashes 3 times but does not start

  With or without the adapter is connected to the computer (well known socket), the computer will not turn on.  The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top.  Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new...  Any help would be great!

  Hi @joshuaj21,

  Welcome to the HP Forum!

  It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more

  I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times.  Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 .  You use a power bar?  Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy

• size power supply?

  
  

  It takes a standard size. To measure, then compare with other power supplies (standard size):
  

• ATX: 6x3.5x5.5 ", h. most common. Use 4 mounting screws. Some more powerful models can be more deep!
• " Mini-ATX: 5x3.5x5 ', dimensions WxHxD. Rare. Use 4 mounting screws. Can be used in a regular ATX case, but often not the other way around.
• MicroATX: 5 x 3 x 4 ", live editing HxWxD use 3. Not interchangeable with ATX or miniATX.
• Flex ATX: Even smaller than Micro ATX. Case various sizes according to specifications; often not interchangeable.

• HP Pavilion 550-177c Desktop: power supply HP Pavilion 550-177c desktop PC

  Hello. Bought HP Pavilion 550-177c Desktop and wanted to ask if it is compatible with the European power outlets? Thank you.

  Hello

  Yes, in the USA, they use 110V.

  • Almost all mobile devices (laptops, phones, tablets) can use the power of 110V to 240V automatically but
  • Not for desktop computers this is why we need to check. Plenty of feed for desktop computers can work from 110V to 240V, BUT we have to switch manually .

  Kind regards.