What the line through average?

Similar Questions

• I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help?

  I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help

  Try to drag the image to id web site (favicon) on the left side of the address bar, instead of the URL.

• Cannot save a document when crossing the line through Deltech, it says read-only, how can I change this?

  My daughter has a test under deltech, when she goes to save him, it says read-only.  What should I do to fix this?

  Hello

  I suggest you follow the steps that can help you solve your problem below:

  1. Find the file you want to edit.

  2. Right click on the file and then click Properties.

  3. Click the general tab, clear the read-only check box, and then click OK.

  4. Edit and save your file as needed.

  If this does not work, contact Deltech.

• I can not get video monitor timeline source I get an icon on the circle of the hand and the line through it

  DEAR LORD

  I have PP CC. I imported all the files for the video editing of music. RED dragon files, they play in the source monitor but cannot be deleted in the timeline WTF?  lol FILES can be entered with left hand BIN for the monitor source, no problem. Its Source is on my calendar.  I AM ASKING YOUR HELP TO SOLVE THIS PROBLEM? Joseph.

  Looks like you got your disabled source patches. It is the first column of boxes in the timeline, V1, A1, etc.. Make sure that the respective patch is enabled for the source that you want to drag in the sequence, and you're falling to the type appropriate way, for example video for video, if only one video is patched.

• Attempt to modify a pdf file - is there a key to strikeover for the current text of the line through text without deleting the text Moose?

  I need to cross out text on a PDF that I am editing.  bar like that but I can't seem to locate this key on the page where I am editing the pdf file in adobe.

  Where can I find it?
  

  Hi dhillionflygirl,

  You can find a tool in the comments pane in Reader and Acrobat.

  Please let us know if you have any additional questions.

  Best,

  Sara

• What these lines of code?

  Hi all!

  I don't know if this is the right forum but I am planing to open a blog on Blogger. But I want to design it from scratch (which is to write the code on a completely white page). I already know the CSS and HTML (I learned especially for Blogger). The problem is I do not understand some lines of code and I don't know why they are there. In order to be able to fully design my own Blogger blog, I need urdastand how it works. Here is the code:

  

  I am do the lines of average 656-658? And lines 665-667? And so on. Is someone can break itdown for me? I have lear another language programming or something? Would appreciate any help.

  Kind regards.

  Bart

  Bart91 wrote:

  What is "template"? It is written in HTML isn't it?

  A theme determines the appearance/layout of your Blog.  It is not just HTML & CSS.  It is the owner of Blogger code.  Blogger stores your content in a database.  The theme retrieves content from Google's servers.  You must use the code owner of Blogger or your blog will not work.   If it is not properly encoded, I'm pretty sure Blogger system will reject it anyway.  So don't try to customize a theme until you fully understand as Blogger of the encoding scheme.  It is unique.

  Find a free or commercial Blogger theme that you can live with.   It will save you hours of frustration.

  Blogger Business 2016 models

  Free download of 2016 models sensitive blogger

  Blogger Templates 2016 | Blogspot Premium models

  Nancy O.

• Problems with highlighting of the rows of the table through RTF-model

  Hello!

  Peace im new in the world of BI Publisher. For the moment, I try to create and RTF-model with the Office AddIn for Word Bi-editeur (2010). I want to create a table based on a table of a pdf document existing already. I have all the data in the right format and order and just worked fine - until I wanted to change the background color of some specific lines.
  If I add that a statement such as

  <? If: Variable = "Expressionstring?" > <? attribute@InContext:background-color;' #FFFF80 '? > <? end if? >

  the context of the evolution of the entry. But the fact the line height. It develops. The expressions more that I use more it grows. That of not good, because the table is so great that it only fits on a single page with fine lines... I tried to apply a height specified in the line through the word, but it does not work.
  I searched a couple hours and still didn't find anything regarding this problem. I appreciate any ideas how to solve this problem.

  Tounsiiaa in advance

  Gabriel

  To help those who have a similar problem: it's just like sfr.farhan.fani wrote. I try to give you a general expression:

  
  

  <? If@row:ROWNAME=VALUE? > (this should work with = > etc do not forget the ' ' for strings etc..)

  < xsl: attribute name = 'background-color' xdofo:ctx = 'incontext' > lightgray < / xsl: attribute > (lightgray can be changed to hexa% and %valeurs)

  <? end if? >

  Hello

  Try the following expression

  5000? >

  LightGray

• Horizontal line through the taskbar

  Hi, I have a white horizontal line through my window in the task bar.  I too, was a piece of editing and left the computer for a half an hour approximately.  When I came back, all my video had disappeared, both in the project and the timeline.  I send you a picture of him.  This happened to someone else?

  Thank you

  Sally

  Everyone sees the same thing on the field of fuzzy time code.

  The good news is that it works fine even if it looks ugly.

  Some users have had loss of similar things to what you describe.

  Take a look at the events currently open to see if FCP X has moved their.

  Also check your Mac for any active automatic system power activity. e.g. energy, App Nap management.

  Al

• BlackBerry 8800 Smartphone, symbol of the battery with a red line through it. Does not start. Help, please!

  I recently bought a 8800 and when I inserted a battery, I got was a battery symbol with a red line through it, on a dark screen.  I changed the batteries, tried to charge it via the USB port and a wall outlet without result.  I tried cleaning the contacts and tried to download t a new OS, but it does not recognize the phone when it is in reality.    I am at the end of my rope with this phone and can't figure out what else to do.  It is just gone? Please help me

  Clipboard?

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  It might not work. You should try a connection with JLCmder 20 to 25 times, as well with the battery and the battery.

  See what's happening.

• I have a red circle with a line through it on my need for speed Shift II in my Start menu, the game does not open

  Problem: I have a red circle with a line through it m need for Speed Shift II in my Start menu.   I have never had a red circle with a line pop up on any program in my Start menu, I wanted to know why it happened and how to fix it. The game accepts updates in the form of 'Add packs' of special vehicles in the original site via the EA download manager sports. So I guess that the game is installed correctly, but the game will not open and run at all, not from the start menu, or by clicking the desktop icon. Any help learn more about the red circle with a line about my program and what to do in case it happens again.

  Recently, I installed my Windows 7 Ultimate OS on a SSD which had been replaced because of a total failure of the car. I've updated the operating system with all

  latest updated windows and the updates of my video card, motherboard, HHD and SSD updated; Thus, all the hardware and software are up to date.

  I was going to restore the disk using last good upward from the orginal SSD before he died a month or two ago. So I think this will probably fix my need for speed II problem, but since it's the first time I've ever seen this problem with a program I would like to know how to cope.

  Any help would be greatly appreciated,

  Take care. Skyraider33

  I've never seen what you describe in the Start Menu, either

  You have a new installation of Windows on your new SSD, Yes? If the game is on another HARD disk,
  is that what you did re - install the game after installing the new Windows?
  Otherwise try to reinstall the game and origin. He would register
  entries, both in the previous installation of Windows.

  If this does not help forums EA would probably be a better place to find out if the
  mods are the source of the problem.

• I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good

  I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good overall. I export it to JPEG, max quality with the establishment of reference standards. I then open the image and it seems fine, as it did in photoshop. My problems begin to occur when I try to download on Twitter as my profile picture. I tried downloading from my office directly on the site via google chrome. When I download the image then begins to have jagged edges and overlooks the tablets. So I thought it was some performance settings, then I tweaked them and restarted a couple of times and still the same result. He would go on my desk but when uploaded to twitter as my profile picture is horrible. So I tried emailing the image of myself and the download through my phone. I opened the image on my iphone and it seemed fine as he did on my desktop but when I downloaded the image it makes then look blurry. I had this problem when downloading photos Twitter via my iphone, so it doesn't surprise me. I have read different forums saying: you must download it from the office, so I thought it would work like this. This could be a problem of twitter than compresses uploaded photos? Other people can do very much the same way, but it does not work for me. Please someone help me before I put my computer in an oven microwave.

  This could be a problem of twitter than compresses uploaded photos?

  Yes. The rest, we can answer. You wrote a lot, but very little discussion. Instead of accurate information you lose yourself in the vague descriptions. Screw color management to the wrong dimensions that trigger resizing server-side it could be any number of things here.

  Mylenium

• What the Bill average reversal in Oracle Payables

  What the Bill average reversal in Oracle Payables?
  In the AP_invoice_Distributions_All table, there is a Reversal_Flag column. Does that mean an invoice.
  
  
  Thank you

  Hello

  (1) when a reversal is made to a distribution line, it does not create a new invoice. is it not?

  No it's not.

  (2) when a line is reversed, the column Reversal_FLag of line to the original address is changed to Y and the new column is a column of Reversal_Flag with a NULL value because it is > the new line.
  (I mean the line that got the error, now has a flag Y on Reversal_Flag and the new corrected row has a NULL value). This thought is just?

  Yes, you are.

  (3) suggests, line 1 was a mistake, it was reversed and line 2 was created. And then we realized that line 2 also has an error, and > it reversed on line 3. What are the statutes of line 1, line 2 and line 3 in the Reversal_Flag column in the AP_Invoice_Distributions_all table?

  Line 1 = inverse (Yes)
  Line 2 = Reversed (Yes)
  Line 3 = Null

  Octavio

• Frame 12 chart: hold SHIFT used to keep the line straight, now what?

  It was when you draw a line in Framemaker that now the SHIFT key while dragging the line would keep the straight line. This no longer works in Frame 12. What is the right way to get a straight line?

  Thanks in advance.

  It seems that talk us about different things. I thought that you were concerened about the change of the line after what he drew.

  To create a new vertical/horizontal line, select the line tool (cursor becomes +), then hold down the SHIFT key. Now, click where you want to start (while holding down the SHIFT key), and then drag the line to where you want to end (i.e. your last approach). At this stage it will still be the selection and display the handles at both ends.

  For editing existing line, ctrl + click on the line. The handles will appear. Hold down the SHIFT key and then click the e handle you want to change. You can move horizontally or vertically along the imaginary axis passing through the selected breakpoint when you use the shift key modifier.

• I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?

  I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Cannot use the button Delete, build, forward, or any box above. There is a black line through each box.

  There is a black line through deleting it, the answer, the next high school & page E-mail t button. It I cannot select any option. E-mail works fine in Internet Explorer. Please help find my e-mail options.

  It seems that the same problem has happened once with Gmail. The proposed solution can be seen here, although he did not have all the answers: override system colors