What turns off SSH on my hosts?

Similar Questions

• What turns off mode 'sleep'?

  I can't find a description either online or in the user manual.

  To be honest I don t understand this issue.

  Sleep is a power saving state that allows a computer quickly resume the operation of full power (usually in seconds) when you want to start working again.

  Put your computer to sleep is like suspension immediately of a DVD player, the computer stops at what he s done and is ready to start again when you want to return to work.

  Recommend you to read the FAQ area on the Microsoft page:
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Why will my router stops transmitting the internet signal after that I turned off the host computer?

  Hi members of the community.

  first of all, my setup:

  modem - router (wrt320n lynksis, yesterday I uplodaded latest firmware - it does not help)---(par câble), PC (windows 8)
  l
  l
  various devices (cable TV, wireless: laptop computer (windows XP), phones (Iphone, android, phone etc.))
  Second question:
  Until now, I had no problem with router, but as I connected the new PC, with windows 8 is installed, the router, I began to encounter the following problem: I turn the host computer (wired, PC with windows 8) off after a minute or two the router (if not always on) continues to transmit the internet signal with other devices (wired (TV) and other wireless).  What's also interesting is that, when I unplug the PC from the router ethernet cable (when the PC is turned off), the router begins to function normally. Why and how to fix it? It seems that the PC would stop the router in the transmission of the signal.
  I would apreciate any help I could get. Because the router is working otherwise fine (when the computer host is turned on when the PC is disconnected from the it), I guess it has something to do with the windows configuration.
  Thank you all,.
  Sincerelly, Janez

  Hi there... we have a different router, but I had exactly the thing happens to me when my husband bought his new computer. After hours of technical support that gave no results of our router manufacturer, I did some research on the web, a vast and I think I found the solution.

  Go to control panel > system and security > system > Device Manager > network adapters > find your network card (mine says in time real PCIe GBE) open cela, go to power management and uncheck the BOX allow the computer to turn off this device to save power.

  After that I did that my router is no longer turns off/goes to sleep when my computer is. Offshore.

  Give that a try, and if all goes well, it will help you too.

• Move a virtual machine to turn off between two hosts, shared storage

  Dear Experts,

  Please guide me for the next case. There are two hosts of Esxi, host 1 is Esxi 4.0 and host 2 is Esxi 4.1. There are store data SAN storage that is visible to both hosts.

  I watched solard winds VM monitor utility that hosting 2 consumes 90% of the memory while its processor is ok. On host 1 is normal. So, I want to spend only a few VM of to host 1. So please correct me if what I think are OK. I will turn off the virtual machine to be moved from host 2. Then I it will remove host 2 inventory. Then on host 1, I'll go to the data store in the folder that VM and do a right click on the file 'say add to the inventory' and now I'm going to see this virtual machine in the inventory of the host list, just turn on and everything is perfect, is this correct?

  Second question on the same hosts, there are a few other data stores that are visible to a host. As if this is the case there is a virtual machine on a data store that is visible to host 2 and I want to spend this VM to host 1 to reduce load on host 2. How to move this virtual machine because this data store is not visible to host 1? Will I have to copy this VM files in a data store that is visible to host 1? If YES then what real required to copy files?

  Kindly help me.

  Kind regards

  From your description I m assuming that you use not vCenter to manage your hosts, correct?

  If you have a store of data shared between two hosts you can do the steps you descripte (power off, remove the inventory etc.).

  For your second case there are several ways, it depends on where you want to place the virtual machine in the future. Wouldn't be on the shared data store that already exists or can in the local data store on the other host? Or is there an option to also display the current data store to host 1?

  If you want to copy the VM files copy the whole folder of it.

  Kind regards

  Mario

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• My iPhone 6s won't turn off. He is stuck on my message page and shakes.  What can I do?

  I plugged my iPhone 6s and loaded yesterday evening?  This morning, I hit the Start button and message with the time my page comes up but it shakes and will not delete by dragging the screen and will not turn off by pressing stop button on the side of the phone and the market.  What can I do?

  Hello

  Your iPhone became unresponsive, try restarting force holding down the sleep/wake and Home button for about 10 seconds, until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch - Apple Support

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• What to do when iPhone 6 will turn off by itself?

  I've had my iPhone since June of 2015 6. I have always been careful enough with it and have never broken broken screen or caused dents in the aluminum body. At the beginning of January 2016 (this year), I had not had a single case on my iPhone and he got up on the table and accidentally drop playing with it. When I picked up back, the screen completely faded and discolored unusual and then turns off completely. The screen went black and regardless of how many times I tried to turn it on, restart it or to load, it still lights. I went to the Sprint store two days after using watch it. The person helping me to told me it would be about a two-hour wait. I come back to the left, after an hour and 45 minutes, and the employee told me that they could not find what the problem and gave me a replacement. The replacement has acted since with it restarts itself when not in use. For example, if I use my iPhone for 30 minutes straight, it would be turned off after that I locked and would not come until after about 20 minutes of me trying to restart it. A red screen might flash just before going off as well. Unfortunately, this happens at least once every day. I tried to go back to the Sprint store, and told me to try the Apple Store. I have not tried to make an appointment and go for the moment. Are there solutions to the problem that I am experiencing that I can do myself or is that called to replace another?

  First of all, you should have taken the first device at the Apple Store, because they are the ones who run the service under warranty, and the unit was still under warranty. Your replacement the Sprint device, it is unclear what kind of device you have received from Sprint, and that can not be under warranty. I recommend that you make an appointment at the Genius Bar to the nearest Apple Store to have this unit looked at and whether she has any guarantee in this regard. It could be a device that Sprint provided you may not have any warranty on this topic and Sprint messed up you the 6 month warranty on your iPhone. The flash screen you describe looks like a hardware problem.

• My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  Looks like you have jailbroken your iPad.

  You must restore like new with another computer.

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• l don't want calls FaceTime anyone! What l do to completely turn off the FaceTime?

  I just got the iPhone 6s more & l do not want calls FaceTime anyone! What l do to completely turn off the FaceTime?

  I read about some callers blocking, but I want to block all access to me via Facetime.

  Thanks for any help you can provide!

  E

  You can go to settings > general > Restrictions > turn off FaceTime under allow. -AJ

• When my battery is fully charged, what button I press to turn off the battery and use the DC

  When my battery is fully charged, what button I press to turn off the battery and use the DC. I need to know what to do to avoid the impoverishment of my battery. OR is it save to leave the computer on, even when the battery is fully charged

  Well, actually from what I read, it's correct exactly as it goes, but not a complete list of the maintenance of the batteries all the factors, methods, practices and details regarding the definition of periodicals.

  While he was just more info not really part of what has been requested, this is why I don't give him properly a collection, I appreciate that you expand on it with greater precision.

  It is not often that one of my messages is considered as not long enough.  :-)

  Thanks for the help.

• Updates configuration: phase 2 of 3-100% full. Do not turn off your computer. Don't know what to do next!

  I have a 503WM Compaq Presario with Windows Vista Home Premium, which has problems after a Windows updated today.  First of all, I have installed .NET Framework (3.5?).  Windows Update started and downloaded a few other updates, and then asked to restart my computer - on restart received the updates configuration message, but when you have to configure the updates: phase 2 of 3-100% full.  Do not turn off your computer, nothing happens--or my hard drive internal or external are doing something and Ctrl-Alt-Del does nothing.  What should I do next?

  Before that, I installed Hallmark Card Studio 2010 Deluxe and received an error message 2738.  Followed the instructions on Microsoft to add two files that had to do with the VB script.  Hallmark installation instructions downloaded then installed .NET Framework 3.5.  The update of Windows has started and installed (I think) 4 critical updates.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• What programs from Task Manager windows peux turn off to improve performance?

  I would try to speed up the newspaper at the time, seems a bit slow, it seems that something is running in the background at startup, do not know how to find out what it is.

  Also can I turn off all windows task manager of programs to increase performance?

  Windows key + R--> type:
  Msconfig
  See the Startup tab for everything that loads the startup/logon.  Then determine which ones that you don't need and learn how to permanently change their settings through their own configuration and/or manual change.

  Everything in the Task Manager is what you see when you look through the Startup tab - as well as everything you ran manually or startup items for you.  It's just to show you what is running.

  What are the characteristics of your machine in general?  Processor (brand, speed, number of cores), amount of system memory, amount of video memory (and if it is shared) and what your specific operating system?