Why will my router stops transmitting the internet signal after that I turned off the host computer?

Similar Questions

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Why Firefox is not saving my log in info after that I used the option "Remember Me"?

  Why Firefox is not saving my log in info after that I used the option "Remember Me"?
  Whenever I get on a frequently used site where I have already indicated on the Firefox browser to save my log in info, I still need to manually connect. The latest versions of Firefox are not like that. I am running Firefox on both my Imac (OS 10.5.8) and on my Mac Book Pro (Snow Leopard), and on each machine, the latest version of Firefox does the same thing. I don't have this problem with Safari, but I prefer to use Firefox then please let me know if there is anything I can do to solve this problem.

  This has happened

  Each time Firefox opened

  Is two months ago

  If you register your name, and your password in the password manager and then having no other effect that Firefox can fill these name if necessary.
  Firefox is not automatically a session you.
  Many Web sites may use a cookie to remember you, you do not need to open a session.

  Websites to remember you and automatically log you are stored in a cookie that you must allow: Firefox > Preferences > privacy > Cookies: "Exceptions."
  Also make sure that you do not use the delete, search and download Firefox browsing history to erase "Cookies" and the "Site preferences" "browser history".

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• WHY CLOUDS DON'T INSTALLED ON THE SECOND COMPUTER?

  WHY clouds don't installed on the second computer... It just says time and again failing?

  attach a screenshot of the error message, http://forums.adobe.com/thread/963429

• in the blue screen it rights something that suddenly turns off and restarts again.

  in the blue screen that he rights something that suddenly turns off and restarts again.my at startup of windows and after it notifies wait me and it stays like that for a long time and restarts again. Help

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Unable to communicate with the host computer using the network University compactRIO

  Please move this topic to the appropriate section if it is not the right section. I can't locate a Council called the compactRIO. Thank you very much.

  I encounter this problem of network communication with my cRIO 9067. the linklocal or USB connection is fine but not static IP connection on the network. I contacted the it Department to assign me a static IP address for my MAC address of cRIO. In our University, they block only unknown MAC address access and the cRIO is in the whitelist. Here are the details

  cRIO attributed to IP address: 129.12.54.xxx, tried both netmask 255.255.255.0 and 255.255.0.0, no luck

  the host computer's static IP address: 129.12.50.xxx, subnet mask 255.255.255.0 (information of cmd - ipconfig)

  First question would be: they are on the same subnet? I need to make sure that even if scientists confirm that.

  Secondly, I followed https://www.ni.com/getting-started/set-up-hardware/compactrio/static-ip by using the IP address assigned, but not luck. I've noticed that I configure same address type cRIO static IPv4 using the USB connection or for local link mode, she went in DHCP mode or Local link once I unplug the USB and restart it.

  Whenever I restart MAX, connect the cRIO and my host to Ethernet jack on the wall, it shows the DHCP mode or link with assigned Local 129.12.54.xxx IP and the subnet mask 255.255.255.248. In addition, I am not able to change it in a drop-down list even after removing it and restart MAX indicated by tutorials OR.

  If you need more information, please let me know.

  Help, please!

  Jinyu

  Dear Mikko,

  I am pleased to tell you that the problem has been resolved. The cRIO works very well.

  The reason why it does not work is in first place because they are in the other subnet. For my school, my host is 12x.1x.54.130 and the IP assigned to my cRIO is 12x.1x.54.131. the subnet mask is 255.255.255.0 number marked in red must be the same for the cRIO is connected correctly.

  Kind regards

  Jinyu

• When the computer 'host' is accessible by the 'guest' on the network computer, the host computer crashes hard.

  There is no error message, making it difficult to diagnose. There are two computers running Vista, fully patched, connected via a network of small size. (Microsoft MSE, no virus, start using activated, etc. "It is clean). When the computer goes to * any * file of the host computer, the host computer crashes immediately. There is no error message, freezing of mice, all hard disk activity stops, it stops absolutely everything. The continuous guest PC works well, it simply notes that the host computer is "not available". Someone saw something like that? I certainly have not. It's far too vague to diagnose.

  I looked on the event logs and couldn't find anything saying. I disabled and re-enabled the network shares, etc. Because they are built Lenovo desktop computers, I have a difficult time to do a "repair", but I guess I could give that a shot with some Vista discs. As I understand it, these computers are not often with Vista bootable discs.

  It is essential that I can diagnose it. In almost twenty years of THIS I've never seen anything this vague and almost impossible to diagnose.

  Any help or advice would be greatly appreciated. Is it all the same to make a "full reset" or "Refresh" of networking in Vista? Who could do.

  I also note that it is a recent issue, these systems worked very well for a while and it's a change suddenly. Particularly curious because I locked the Windows updates to update only when I say so... and I didn't have lately.

  Have you tried to replace the NETWORK card on the computer that crashes? If not, it's what I would do then. MS - MVP - Elephant Boy computers - don't panic!

• Error message: «the virtual network on the host computer drivers are incompatible...» »

  Just bought a new computer that is running Windows Vista Ultimate 64-bit.

  I installed VMWare Workstation 6.5.1 build 126130.

  I copied on a machine virtual from the old computer (running Windows XP Pro and VMWare Workstation 5.0.0 build 13124). I improved this VM Workstation 6.5. This virtual machine is currently running Windows XP Pro.

  When I run the virtual machine on the new computer, I get the following error message:

  "The virtual network on the host computer drivers are incompatible with the installed application of VMWare. Version expected 5. Please reinstall the product. Virtual device Ethernet0 will start disconnected. »

  Note that the virtual machine runs; I don't have any network capacity.

  I read the thread http://communities.vmware.com/thread/186731, who seems to have the same problem. He had installed 6.5 on 5.5; When he uninstalled and deleted all of the directories, and then reinstalled everything went well.

  I don't have any product VMware existing on the computer that would cause this type of conflict.

  So, what should I try to fix this?

  Thank you

  Wayne

  If you want to install only vmnetadapter, open cmd as admin in vmware workstation dir and run;

  "rundll32 setupapi, InstallHinfSection VMnetAdapter1.Install 128% CD%\netadapter.inf"

  You can also repeat for vmnetadapter8.

  If it does not run as above

  "vnetlib - install devices.

  Joakim

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Please, he

  I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Help, please

  I looked everywere in my computer, but they are not found

  I bet that you have selected the folder Adobe Bridge CC or CS6, and it would be in there under Program Files/Adobe/or Program Files (x 86) / Adobe /.

  Move to... in the file Explorer apply only to records not the bridge program.

  You open Bridge and Photo Downloader allows you to move pictures from your SD card in the deck (also called import)

  Gene

• incomplete printing of letters, but only from the host computer

  I have a recurring problem with my print where the last line of each paragraph does not correctly print outs.  the bottom of the letters are cut off.  In addition, this problem occurs only on the host computer in our network.  and maybe when I use microsoft word, excel or publisher. (I print web pages properly) I did the following:

  1 printer checked drivers were updated and they are.

  2. ran a clean ink cartridge program, did not work.

  3. install new, both ink cartridges in black and color.

  4. selected 'best' for the quality of printing, this improves the problem but does not eliminate the problem.

  hardware information:

  printer hp officejet j5780 all-in-one

  host computer: dell desktop 2009 windows vista

  portable printer: notebook computer dell 2009 windows vista

  Sincerely, melody

  I have provided a link to documents from HP that can help solve the problem you're having with printing of cut.

  http://support.HP.com/us-en/document/c01671543

  There are also links in the above link which may help even further.

• error "could not complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  Hola y buenos dias, he puesto 2 hots directly in una DMZ y al activar el error HA da este:

  "Unable to complete the configuration of the ha agent on the host computer.". misconfiguration of the installation of the host network.

  ESTOS son gemelos servidores y poner esta durante 2 Años last config antes han estado dentro infraestructuras en a cluster con otros 4 running perfectly. Ante nueva situation that met responsible security perimeter solo our esta posibilidad por lo as procedimos dio el a preparar los hots ante the nueva config enchufamos estos y an el swhitch of the demilitarized zone.

  Según me ha EDI el responsible of security perimeter, todo el trafico desde estos 2 hots hasta el esta allowed vCenter y asi mismo el cortafuegos responde al trafico ICMP a estos hots (este tema that he read in various Québec sites are important para el HA).

  Version of hots los Esxi 4.1.0 721871

  Me falta algo o tengo algo configurado evil?

  Important Algo a revisar?

  A greeting is gracias por adelantado

  Buenas

  Me designed that tendras 2 con 2 direcciones distintas vmkernel (lo del tema Las vlan y las tarjetas're menos ahora lo)

  Prueba has see the resolución desde el propio ESXi, prueba el uno a otro por both vmkernel ping, etc...

  A malas, saca ambos nodos del cluster y vuelve a unirlos con desactivado, cuando tengas los 2 HA, activa HA of nuevo y con eso you can smear of dudas so por el tema del VC University y UN vicio en BBDD.

  If todo esto falla, have as plantearte touch en el aam, are fairly complejo y peligroso if no to sabe hacer correctamente.

• "HA agent on the host computer was arrested.

  After quick vMotioning a number of virtual machines on an esx host I get an error on this host that "HA agent on [host] in cluster [NOMCLUSTER] in [datacentername] has an error: HA agent on the host computer was arrested" this could be the cause?

  Thank you

  "reconfigure for ha" is not impact on any virtual machine running or he kickoff an HA event, but you work with just the HA agent, that's all.

• In Lightroom, after that I turned my RAW files to DNG can I delete the original files?

  In Lightroom 5, after that I turned my RAW files to DNG can I delete the original files? I am fill hard drives at time (or so it seems) and I remember someone once telling me that after I converted my dng files RAW versions, I could delete my original RAW files.

  Is this true?

  Ideas?

  Entry?

  Thank you!

  Yes, you can remove the original RAW files once convert you them to DNG. The only downside is that if you want to use the software from the manufacturer of the camera for a reason, so key information that can be used by the software manufacturer is deleted in the conversion from RAW to DNG.