What type of recovery is files d needs

Similar Questions

• What type of cable/port is called also where I can buy one?

  

  Please link me the website where they have cable!

  This is the "mini-DVI' to this end.  Cabe you need depends on what type of monitor or projector, you need to connect to the other side?  Apple sells adapters for this purpose and made StarTech.

• What kind of cable HDMI do I need?

  I'm trying to understand what kind of mini HDMI cable, I need to my Xoom.  Are there different sizes of mini Cables HDMI?  I keep seeing A HDMI to HDMI C.  HDMI A to D, or micro HDMI and miniHDMI.  So I am really confused.  I scoured the specs on the Xoom, but all it says is "HDMI output."

  rkbarth wrote:I'm trying to figure out what type of HDMI mini cable I need for my Xoom.  Are there different sizes of mini HDMI cables?  I keep seeing HDMI A to HDMI C.  HDMI A to D, or miniHDMI or micro HDMI.  So I'm really confused.  I've scoured the specs on the Xoom but all it says is "HDMI output."I found this cable on amazon.  Will that work with the Xoom?
  

  Hello.  You must the microphone cable HDMI to male HDMI standard.  The mini is not the right size for the Xoom.  I'll be right back with the cable you need from Amazon.   -Dan

  Here is the cable you need, it's a cable of high quality and type you need to connect to your TV.  It is a micro HDMI to male HDMI.

  Post edited by: DansDroid

• Test system update fails on ORA-01113: file 1 needs media recovery

  I use Oracle 9.2.0.6 on HP - UX (B.11.11)
  
  I'm refreshing to a test of production on the same server system.
  
  The update fails on...
  
  ALTER DATABASE OPEN RESETLOGS;
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  
  I do mainly:
  -Place prod tablespaces in backup mode
  -Copy the files from production to test directories
  -Take prod tablespaces out of backup mode
  -pass the prod (once for each newspaper group) log files
  -copy files from archive prod to test
  
  STARTUP NOMOUNT
  
  Create control file from a copy of the prod trace file
  (CREATE CONTROLFILE REUSE SET DATABASE 'ELLTEST' RESETLOGS ARCHIVELOG)
  It works
  
  RECOVER DATABASE USING BACKUP CONTROLFILE
  -J' I grab the last log archive copied during production.
  
  ALTER DATABASE OPEN RESETLOGS;
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / elltest/system/system_01.dbf'
  
  I think I have I have all required log archiving prod?
  
  Any advice?

  What you're trying to do is an incomplete recovery of the database. Since the redo logs are not used in your recovery you must explicitly specify the time to stop. If you do not process assumes a complete recovery and will require a request for reinstatement of online recovery log data that you do not.
  You can use UNDO based recovery with
  RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROL FILE;
  then type CANCEL after the last active log has been applied.
  Open with option RESETLOG database. It should work.

• What type of file is C:\windows\sxscapenddel

  What type of file is C:\windows\sxscapenddel

  Hello

  We need more information.

  What operating system do you use?

  Where is this file which is located? (which folder)

  It looks like a file that is associated with the C:\Windows\winsxs folder.

  WinSxS is the component storage folder (Side by Side).

  There is a component that deletes files that are replaced by Windows Update in this case. Before it will be deleted, they are moved to the C:\WINDOWS\winsxs\Temp\PendingDeletes folder.

  Let us know.

  Concerning

• What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  Original title: files

  What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  On Tuesday, February 7, 2012 16:28:19 + 0000, RonaldMatte wrote:

  What is the difference between files? examples; PDF, http, wps. Why is there a manyand then why do you need different programs to open?

  Each file type is in a different format.  The formats are different
  essentially for two reasons:

  1. the files contain any other type of information. For
  example, an mp3 file contains a music and a xls file contains a
  worksheet. The music and spreadsheets are very different things and one
  a unique type of guy would not work for both.

  2. There is also the example of the types of files that are very different, even
  Although basically they both contain the same type of data. For example,.
  a doc file is a file created by Microsoft Word processor (or
  some compatible programs) and a wpd file is a text file
  created by WordPerfect. This is because Word and WordPerfect are two
  very different programs, with very different characteristics. Designers
  and authors of each of the programs designed for a type of file that would be
  works very well with their program.

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Please reply to the newsgroup

• I create a logo for a company, but I'm new to illustrator and don't know what type of file to give them for their personal use if themselves don't have Illustrator to work with

  So I designed a logo for a company, they want to buy too! I don't know what type of file to send to them for their personal use. I am new to illustrator, so I'm not sure whether it should be a .png, .pdf or .svg. They don't have access to Illustrator, so they would not be able to view the native .ai file, how can I send the file?

  Whenever I have provide a customer with a logo, my first question that would be what they are they who need for?

  And when you have the response from them, it will give you a good idea of what to provide.

  Second to that I will always create a logo set to compile something like the following:

  1. Original .ai logo - RGB/CMYK/Black/White versions
  2. A set of PNG with transparent backgrounds of different sizes (something like 100px, 250px, 500px, 1000px wide)
  3. A set of .jpg in various sizes (something like 100px, 250px, 500px, 1000px wide)
  4. And now a .svg and .pdf file

  Once again it all depends on what the customer wants it, but once you have furnished with everything that they are able to use it for the most part.

  Good luck

• ORA-01195: online backup of file 1 needs a recovery more match

  Hello
  
  When starting a clone database, I got an error
  
  SQL > alter database open resetlogs;
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01195: online backup of file 1 needs a recovery more match
  ORA-01110: data file 1: ' / test/oracle/oradata/test/system.dbf'
  
  
  What should I do to open database
  
  Thanks in advance

  Hello

  Make sure that all data files are present.

  This is a SQL and PL/SQL Forum. Please post in the Forum below for the best answers.

  {forum: id = 61}

  Thank you
  Shankar

• What type of destination data recovery?

  Hello

  What types of destinations are supported for new data recovery backups in vSphere 4? Is it only save existing data warehouse? Or you can save to NFS or SMB shares?

  Thank you

  Pascale

  Here is a link to a FAQ which answers these questions actually:

  http://www.VMware.com/files/PDF/VMware_Data_Recovery_FAQ_4.21.09.PDF

  Duncan

  VMware communities user moderator

  -

• What Type of file?

  I beat the monster format. The monster format as Adobe first Elements 10 will not support two videos at once or DSLR bother at all. I conquered it by downloading a software that allows me to convert videos in a particular file. So, I need to know what type of file is better supported and convenienty used in EPA 10. Can someone tell me?

  The best thing to do would be to convert the Canon AVCHD video. Then you can load the two AVCHD videos in a project. But this will only work if you have shot your film to Sony in FH or mode 1920 x 1080 HQ and you turned your Canon video at 1920 x 1080.

  (1) open a new Premiere Elements project. Make sure it is set up for DSLR 1920x1080p30.

  (2) connect your Canon camera to your computer via USB and use Media Get / Flip camcorder, AVCHD or hard drive to open the video importer and import the files from the camera to your video project.

  (3) put the video on your timeline and use share/computer/AVCHD with the preset for M2T 30 fps 1920 x 1080 to your movie as an M2T file.

  (4) open a new project set up for AVCHD Full 1920 x 1080 with 5.1 audio (since your Sony pulls in 5.1).

  (5) use Get Media to bring your film from Sony and created M2T files above and start editing.

  Or download the version 11. In which you can just load everything at once and just change!

• ORA-01194: file 1 needs a recovery more match

  Hello
  
  I tested on Linux Redhat 5.4 RMAN / Oracle 11.2.0.2 and had the following problems:
  
  My configuration:
  
  >
  RMAN > show all.
  
  Database with db_unique_name TESTDB RMAN configuration parameters are:
  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
  CONFIGURE BACKUP OPTIMIZATION
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT for DEVICE TYPE DISK TO ' / opt/BACKUP/11.2.0.2/RMAN/TESTDB/CONTROLFILES/%F';
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' / opt/BACKUP/11.2.0.2/RMAN/TESTDB/DATA/%U';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/BACKUP/11.2.0.2/RMAN/TESTDB/CONTROLFILES/snapcf_TESTDB.f';
  
  >
  
  My 2 backups:
  
  >
  
  RMAN > list backup;
  
  
  List of backup sets
  ===================
  
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  * Incr 43 0 M DISK 00:14:17 971,77 2 March 11 *.
  BP key: 44 status: AVAILABLE Tablet: NO Tag: TAG20110302T062419
  Part name: /opt/BACKUP/11.2.0.2/RMAN/TESTDB/DATA/01m66ikk_1_1
  List of defined backup data files 43
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  * 1 0 incr 1001503 /CDATA/TESTDB/system01.dbf* March 2, 11
  * 2 0 1001503 /CDATA/TESTDB/sysaux01.dbf* incr 2 March 11
  * 3 0 incr 1001503 /CDATA/TESTDB/undotbs01.dbf* March 2, 11
  * 4 0 incr 1001503 /CDATA/TESTDB/users01.dbf* March 2, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  * 53 full 9.36 M DISK 00:00:11 March 2, 11 *.
  BP key: 58 situation: AVAILABLE Tablet: NO Tag: TAG20110302T063849
  Part name: /opt/BACKUP/11.2.0.2/RMAN/TESTDB/CONTROLFILES/c-2528028017-20110302-00
  SPFILE included: Modification Date: March 2, 11
  SPFILE db_unique_name: TESTDB
  Control file included: cash SNA: 1002272 cash time: March 2, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  Incr 78 0 M DISK 00:13:38 970,24 March 2, 11
  BP key: 81 situation: AVAILABLE Tablet: NO Tag: TAG20110302T064449
  Part name: /opt/BACKUP/11.2.0.2/RMAN/TESTDB/DATA/03m66jr1_1_1
  List of defined backup data files 78
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  1 0 incr 1002771 /CDATA/TESTDB/system01.dbf March 2, 11
  2 0 1002771 /CDATA/TESTDB/sysaux01.dbf incr 2 March 11
  3 0 incr 1002771 /CDATA/TESTDB/undotbs01.dbf March 2, 11
  4 0 incr 1002771 /CDATA/TESTDB/users01.dbf March 2, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  93 full 9.36 M DISK 00:00:10 March 2, 11
  BP key: 98 situation: AVAILABLE Tablet: NO Tag: TAG20110302T065836
  Part name: /opt/BACKUP/11.2.0.2/RMAN/TESTDB/CONTROLFILES/c-2528028017-20110302-01
  SPFILE included: Modification Date: March 2, 11
  SPFILE db_unique_name: TESTDB
  Control file included: cash SNA: 1003421 cash time: March 2, 11
  
  RMAN >
  
  >
  
  I want to rebuild the database from the first backup and I always get the error:
  
  >
  RMAN > RUN
  2 > {}
  3 > # STARTUP NOMOUNT;
  4 > # RESTORE SPFILE to ' / u01/app/oracle/product/11.2.0.2/db_1/dbs/spfileTESTDB.ora' tag "TAG20110302T063849".
  5 > # SHUTDOWN IMMEDIATE;
  6 > # STARTUP NOMOUNT;
  7 > # RESTORE CONTROLFILE tag "TAG20110302T063849".
  8 > # STARTUP MOUNT;
  * 9 > SET up to this THAT SNA 1002272. *
  10 > RESTORE database;
  11 > RECOVER DATABASE;
  12 > ALTER DATABASE OPEN RESETLOGS;
  {13 >}
  executing command: SET until clause
  
  From restoration to March 2, 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from the restore backup set data file
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  channel ORA_DISK_1: restore datafile 00001 to /CDATA/TESTDB/system01.dbf
  channel ORA_DISK_1: restore datafile 00002 to /CDATA/TESTDB/sysaux01.dbf
  channel ORA_DISK_1: restore datafile 00003 to /CDATA/TESTDB/undotbs01.dbf
  channel ORA_DISK_1: restore datafile 00004 in /CDATA/TESTDB/users01.dbf
  channel ORA_DISK_1: backup /opt/BACKUP/11.2.0.2/RMAN/TESTDB/DATA/01m66ikk_1_1 piece reading
  channel ORA_DISK_1: room handle=/opt/BACKUP/11.2.0.2/RMAN/TESTDB/DATA/01m66ikk_1_1 tag = TAG20110302T062419
  channel ORA_DISK_1: restored the backup part 1
  channel ORA_DISK_1: restore complete, duration: 00:20:06
  Finished restore at March 2, 11
  
  From back to March 2, 11
  using channel ORA_DISK_1
  
  starting media recovery
  
  Cannot find the archived log
  Archives journal thread = 1 = 3 sequence
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 02/03/2011 08:06:37
  RMAN-06054: unknown request media recovery log archived for thread 1 with sequence 3 and from the 1001503 SNA
  
  RMAN > * end-of-file *.
  
  RMAN > ALTER DATABASE OPEN RESETLOGS;
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of alter db command at 02/03/2011 08:14:59
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / CDATA/TESTDB/system01.dbf'
  
  >
  
  I don't know since 2 days where it's a mistake? Help, please.
  
  Help, please!
  
  
  hqt200475
  concerning

  Hello

  Please also visit:

  DATAFILE NEEDS MORE RECOVERY TO BE CONSISTENT [ID 417710.1]

  Respect of
  HELIOS

• What files are needed to access the aspect of the heritage of GarageBand?

  What files are needed to access the aspect of the heritage of GarageBand? After the upgrade my MacBook Pro and Mac Pro, the appearance of the inheritance is only accessible to the general public on the MacBook Pro. What files are needed for these instruments of the legacy and the filters on my MacPro? I read that the removal and reinstallation of GarageBand 6.05 will do but 6.05 GB certificates have expired and is no longer allow it to be installed. Any help is greatly appreciated.

  I read that the removal and reinstallation of GarageBand 6.05 will do but 6.05 GB certificates have expired and is no longer allow it to be installed. Any help is greatly appreciated.

  You always have an installer for GarageBand 11?  An installation of iLife 11 DVD or the DVD Installer original system for snowLeopard with applications for funding?

  You can install GarageBand 11 of these media, if you set the date system your mac to a date until the installer has been released. Then, the certificate will be valid.

  the appearance of the inheritance is only accessible to the general public on the MacBook Pro.

  But because of legacy patches are available on your MacBook pro, you can copy all the missing files from the library of the Instrument and loop library in your other Mac.

  Compare these files in the folder/library on your system drive on Mac of high level.

  The instrument library: Library/Library/Application Support/GarageBand/Instrument.

  and loop library: / Library/Audio/Apple Loops/Apple /.

  Copy all the files to the corresponding folders on your MacBook Pro that is not there.

• What type of modem do I need connect my AirPort Extreme to BT infinity

  What type of modem do I need connect my AirPort Extreme to BT infinity

  The question is not really what kind of modem you need... it is rather one of 'approved' modems which provides the BT will be compatible with the AirPort Extreme.

  Unfortunately, the AirPort Extreme and other Apple routers are designed to work with standard DSL and cable type connections.  The fiber is a new ball game, and Apple has not yet learned all the rules for the new game.

  Your best bet would be to publish a list of 'approved' BT here modems and then ask other users who might have the same product and an AirPort Extreme about their experience.

  You can also just ask BT what product they would recommend to work with the AirPort Extreme.  They tell you that they will not support you if you are using the Apple product, so maybe it's something to consider as well.

• What type of file can be stored in I cloud drive... I was told only pdf and pages, numbers and keynotes... is that correct?

  What type of file can be stored in iCloud drive... She was told only pdf. and apps pages, numbers and keynotes... is that correct?

  You can store any type of file in iCloud drive.

• What type of card PCI FireWire do I need for my HP Pavilion p7-1209

  What type of card PCI FireWire do I need for my HP Pavilion p7-1209? I need a location for a firewire port. I need to capture video off my camcorder 3CCD Panasonic.

  You will need a PCIE x 1 firewire card location.    (1) you have firewire 400 (1394-a) or 800 (1394b)? See here for examples, the 400 is angular, the 800 is rectangular.   This page lists different cards