OMSE - no health status on SNMP

Similar Questions

• 5.1 ESXI health status: unknown

  Hello

  I have a HP PL DL380p G8 and ESXI 5.1 with essential kit. Everything was ok, but after months, I got in the health configuration tab: unknown.

  Bit is all ok, server is running, and I don't find any hw problem.

  Why is-status unknown health?

  Thank you.

  Hello

  Restart management agents.

  How? Look here:

  Management for the restart ESXi (ESX 3i) agents

• vCenter 5.1 Health Status Changed alarm

  I have a vCenter server that occationally get an alarm status health (pass from green to red) changed, but I can't understand what it refers.  I've looked through the vms, hosts and plugins and can't find any other alarm that could have triggered it could cause.

  Nobody knows what he is referring?

  Thank you

  Matt

  Go-> vCenter Home-> Select health of vCenter status and see if there is anything in red or yellow

• Health status power warning...

  all, morning

  I want to ask on vSphere client I use VMware EXSI version4.0, why healt condition WARNING This is normal or not? the image can see the attachment.

  in vSphere that I am installing linux red hat 4.7 and earlier still not up-to-date. This is the cause? before that I change my ups, the warning does not appear, but after that I change ups that is the warning appears.

  Thank you

  guys...

  my linux host now time has tq up-to-date for you ' r reply and help me...

  I put in sysstat and create calendar for copy time hwclock and made

• Status of disk hard not Visible in the State of health - ESX3.5i

  Hello

  Please find the attached screenshot.

  We are not able to view the status of the hard drive in the Configuration > State of health. Any comments?

  Version ESX - 3.5i

  HP Proliant DL 585 G1 - Server

  Berries - Smart Array 5i controller

  (We really are installing BMC monitoring tool and this tool does not identify hard drives).

  Concerning

  HMS

  To see the State of health of the disks and RAID configurations on a HP host, you must install CIM HP (aka offline Bundle) providers for the specific ESXi version on the host. However, I checked the HP support web site, and there's no CIM providers for the server model you are using.

  I have a HP DL380G5 and G7 host running with installed CIM providers and health status occurs when connect directly to vCenter as well as for the host.

  André

• status alert health vCenter 4.1

  Hello

  Since I've updated my high 4.0 vCenter 4.1 every time I start the server vCenter service I get this alert:

  VCENTER

  Draw the attention of

  Monitoring of health status

  This object

  2010-11-30 10:03:33

  Anyone with this problem too?

  just in case

  http://KB.VMware.com/kb/1025010

• Firefox 36.0.4 health report does not

  Report the health of Firefox does not. Does not show the start date time. This portion of the screen is empty with just a green dot.

  Please upgrade to the latest version of Firefox:

  • Update to the latest version of Firefox

  Please make sure that Firefox can establish connections to the dns names that are needed. If you open the console Web are there errors on the health status of Firefox page?

• 2.2 - ESXi - no State health of OME

  I try to get OpenManage Essentials 2.2 health of ESXi.

  A server ESXi 5.1 and OMSA 7.4 Health Watch
  Servers with 6 ESXi and 8.3 of the OMSA only show a grey question mark.

  I can find no documentation indicating which versions of ESXi and OMSA is compatible with 2.2 OME.

  I found that something was off with the OMSA package deployed via the Update Manager. It showed as being in line with the base line, but I re-uploaded VIB in the Nativity update repository, created a new base line and attached hosts. The hosts showed now also fort and OMSA installed OK.

  OME now see the health status.

  But, under Data Sources in the display of the device, the administrator of the server (storage management) and VMware ESXi have a triangle of yellow warning next to them. How will I know what is the reason for these warnings?
  

• The State of health critical vCenter 5.5 follow-up

  Hello

  I have a new alarm 'Critical Health Status Monitoring' and in the description, it says see vCenter Service Health in the request of the Administration, but when I go to the Administration (logged as administrator) there is no section of Health Service of vCenter . I do not see a vCenter Service Health section even being logged in as the admin. root

  Found a few suggestions to check services, but they're all on the vcenter server.

  
  

  Form what I found, seems to be on a compatible web browser and have installed the plugin for integration of customer, although it includes the same way on Google Chrome and IE 11.

  I have no way to see what is about this error, any thoughts?

  Thank you!

  Hello

  you have two options to check for this.

  1. connect to your vSphere Client and goto vCenter Service status.

  2 log in to your vSphere Web Client, open your vCenter and goto followed and Service status

  We could see if a Service is not working as it should.

  Frank

• Status of clustering and failover rises as warning - NO IP Hash offset

  Hi all

  In my lab at the House, I created a distributed switch and activated the health check. I checked and found that the grouping and health status was as unknown. Screen attached.

  

  After 3 minutes, I had an alert in the VI client to the host stating vds teaming situation of incompatibility. Attached snapshot.

  

  As I turned off the alarm that teaming and health goes unknown status to the warning. NO IP Hash mismatch. Attached snapshot.

  

  I checked all the port groups and I'm not under IP Hash on any group of ports. I rebooted services.sh but no go. I did check the vmkernel.log file, but did not find something informative. I'm under esxi 5.5 U1 and VC 5.5

  I'm running my VMware Workstation 11 environment

  Any suggestion how to solve the NO IP Hash mismatch error.

  Thank you

  Vaibhav

  Thank you for your question on my blog, sorry for the late reply.  Health check is sometimes a little weird.  VMware recommends to use to identify the problem and not constantly.  Health check is not supported with virtual load on any type of network interface cards on the platform, see:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2034795

  This includes FlexFab HP or UCS.   I assume that the virtual network adapter in my computer can also be throwing it for a loop.   I consider the following options:

  -Check your political grouping switch

  -Check to each political grouping port group

  -Ensure that none are set to the hash of the IP (for mac source based laboratory at home is your best bet or charge based on grouping)

  -If everything's not hash IP then I would turn off and on again you might find new results

  -At the end of the day the fact that you are using workstation can be the cause of the problem because ESXi hosts see a virtual network card.

  Notes on the screenshots:

  -First shot is normal, that's the message while it is still testing

  -Second and third are related to a real incompatibility or the grant in the above KB

  It's my best guess... the truth is that I've seen all kinds of crazy what with virtual cards.   I saw a situation where the health check was running a CAM table off entries (500,000) with health check the UCS... it's really bad on UCS do not use.

  It will be useful.

  Thank you

  Joseph

  blog.jgriffiths.org

• vCops always health to 100%

  Hi guys.

  Recently, I installed vCops 5.8.3. So, I created a dashboard health status for a vmware folder... and health status is always 100%.

  

  Dashboard settings

  

  Any ideas, guys? Maybe something wrong with the settings of mi dashboard?

  Thank you

  PD: vCenter Server 5.5.

  How long has worked vCOPS?

  I ask this question because it takes vCOPS 3 weeks to identify what is Normal, once he gets an idea on how the object is running it will start to display health more accurately

  Basically health will go up from low of anomalies, the workload and flaws.

  If there is a foul health will go instantly red, for example if it is a host lost redundancy error will not lift health go to 0. Anomalies and workloads are based on what is considered normal.

  If these objects are healthy?

  Easy way to test is to cause a problem and see if its reflection it properly and if you look at the anomalies or workloads for these objects are data points in the gray box that is the dynamic threshold that's been developed?

• SNMP configuration

  Hi all

  We have Esxi 5.1 environment in our Organization, we must activate SNMP on all hosts. I have all the information of the SNMP protocol as, rope, add IP and port.

  But I don't know how to activate the SNMP on the host.

  Need help on setting up SNMP on the host, as I do for the first time

  Thank you all.

  You can check the status of snmp using 'esxcli system snmp get. "

  To activate snmp use the following command:

  "esxcli system snmp set e true.

  Other parameters can be configured with the following options:

  / var/log # esxcli system snmp set - help

  Use: esxcli system snmp set [command options]

  Description:

  together, that this command allows the user to configure the SNMP ESX agent.

  Cmd options:

  -a |-authentication =

  Default authentication protocol. Values: none, MD5, SHA1

  -c. | -communities =.

  Define up to ten communities every step more than 64 characters. The format is: Community1 [, communaute2,...] (This replaces previous)

  settings)

  e |-allow to start or stop the SNMP service. Values: [Yes | No, true | false, 0 | 1]

  E |-engineid = id of motor Set. SNMPv3 must be at least 5 to 32 characters hexadecimal. x 0 is stripped if found and the colon (:))

  y |-hwsrc = where of events material source of IPMI or Indications CIM sensors. An a: directions | sensors

  l |-loglevel = the Agent System syslog logging level: debug | info | WARNING | error

  n |-notraps = use separate comma: esxcli system snmp set [command options]

  Please let me know if it helps.

• Brain status anomalía ESXi

  Hello to all,

  I like turned out one chiarimento in Re has delle anomaly che rilevo nei brain contenuti nei miei host vmware (ESXi version 4.1/5.1).

  Accedendo del mio e of vSphere ESXi interfaccia con andando nella sezione Configuration-> health status (vedi sotto immagine) ho noticed che he sensore dei brain mi marked it following problema per tutti i presenti nella macchina brain:

  Disc or disk drive Bay 1 1 0: Drive Fault - Deassert

  Disc or disk drive Bay 1 1 0: Predictive Failure - Deassert

  Disk or disk Bay 1 1 drive 0: critical table - Deassert

  Disc or disk drive Bay 1 1 0: table failed - Deassert

  Disc or disk drive Bay 1 1 0: rebuild underway - Deassert

  Lo status dei brain in normal (vedi sotto immagine) e e tutti i brain works correctly (nel RAID not this sound system disk in failure).

  Ho noticed anomalía in different host, material con questa e versioni ESXi different.

  

  E' possibile avere a chiarimento in re al problema just esposto?

  Grazie

  Ciao,.

  Dall hai postato, che interfaccia di health ti vedo che sta dicendo che NON hai problemi.

  Tramite quell'interfaccia vedi tutti i sensory che he CIM del tuo Server ti e mostra he loro e quello che vedi status ' da interpretarsi come:

  "di sensore he Failed Array by it drive bay drive 1 1 e' ok ' ossia non e' didn't.

  I have sensory che vedi are dal Comptroller che stai using e dai caricati provider: case cerca I provider date by I vari host nei siti del Winery.

  Giuseppe

  --

  Giuseppe Guglielmetti

  2014/1/11 rbertolini [email protected]<>[email protected]>

  Https://communities.vmware.com/index.jspaVMware communities >

  Brain status anomalía ESXi

  created by rbertolinihttps://communities.vmware.com/people/rbertolini> in Italy area VMware User Group - discovers the discussion completehttps://communities.vmware.com/message/2333151#2333151>

• Intrusion status PowerEdge T110 II can not be reset

  Hello

  I have a PowerEdge T110 II which is flashing orange health status indicator. The OMSA, the problem was the intrusion alert. I opened the front cover, but now it is closed. How can I reset this alert? I read somewhere to go to the security configuration of the bios to reset it, but there is no encroachment setting it at all. I even updated the bios with the latest version. Any help much appreciated.

  Thank you

  Lee_Km,

  Normally this amber should go back to blue when the cover is restored. I want to watch updates iDrac on the server as well as access to the iDrac (Ctrl-E) and then clear the logs. If the error reappears, then remove the cover and see if now the Intrusion PIN down sensor manually disables the error. If yes reinstall it the lid and make sure the PIN is depressed and clears the error. If none of this works, you can also try to reconnect cable Intrusion sensors as well.

  Let me know the results.

• No free esxi4 hardware status tab?

  Hello

  I'm just starting with esxi4 (free version) and the Vsphere Client, for a reason I do not have the hardware status tab.  The server is a proliant dl380 g5.  I can see some info but no hw status, so I have no way of knowing if, like saying a disc breaks down.

  Is it by design or something is at stake here?

  You should have a selection of health status in the Configuration TAB. You must install the HP of ESXi version (available on the VMware ESXi download area or the HP Web site) and you will all see a list of equipment and the health. There is no alarm function in the free version of ESXi. You can download Free Veeam Monitor that does not have the ability to send an email.