What will be lost if I use a new database for vCenter Server?

Similar Questions

• What will be lost if I perform a new installation of vCenter Server?

  Hello

  We tried to upgrade our existing vCenter Server 4 to 5 without success.  The VC Server service is not able to start up.

  VMWare support staff has suggested us to perform a new installation.  We would like to know what information will be lost and must be reconfigured to the new vCenter Server?  We are OK to do not keep permeable Performance data.

  Thank you

  What you lose depends on what you have in vCenter.

  Models, Folders, Cluster configurations, pools of cluster resources, HA/DRS configurations, alarm settings

  clusters to store data, storage profiles, profiles of the host, historical events,

  If you use the vNetwork distributed switch,

  vCenter Distributed switching configurations will not exist in the new facility and

  need to be rebuilt before adding the hosts;   You'll probably need to convert those back

  the standard vSS on the hosts temporarily before adding them to the new vCenter...

  Basically... you lose all configuration except the configuration stored locally on the host computers.

  It is essentially the list of virtual machines and the stuff you see in the 'configuration' tab when you click

  a host.

  You will need to add the hosts as one of the steps in the installation of the new Victoria Cross.

  You will have the virtual machines stored on the host and resource pools that existed

  on the host at the time, vC was lost.

  However, when you move the hosts in a cluster, the 'Home' resource pools

  will be deleted.

• How to calculate memory used by each database in a server

  We have 7 databases running on a server.

  Operating system: solaris

  I want to add a new database on this server. So I want to find if we have enough memory to add a new database. How to find?

  There is a script called omemuse.sh that does exactly that, and you can find it easily enough. There are two versions of the script; that the one you use depends on your version of Solaris.

  Also note that the amount of memory that your use of DBs depends on the SGA and the total PGA. The latter varies according DB activity over time, it should be taken into account.

• What are the requirements for vCenter Server 5?

  What are the requirements for vCenter Server 5?  Specifically, I'm looking at the vCenter Server Appliance but it is set to 8 GB of RAM.  I hope to run it on a lab at home that has only 8 GB etc. total RAM.

  The system requirements are here - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-installation-setup-guide.pdf

• Can I clear my phone without connecting to a computer? What will be lost?

  I need to clear my phone because iTunes ruined game. I don't want to wait until I get home from vacation because it is virtually unusable. What will I lose? I backed it up to iCloud, including photos.

  I would highly recommend against that. Chances are that you will succeed only in making it even more unusable.

• How will I know if I use the new synchronization?

  Want to know if I need to go through the new process of synchronization of devices not linking the synchronization of the former and the reset to the new synchronization.

  The servers used for the old version of sync have been taken down and you can no longer access the data stored on the server.
  You can use the new synchronization version that uses a Firefox account (https://accounts.firefox.com/).

  • https://blog.Mozilla.org/services/2015/07/31/shutting-down-the-legacy-sync-service/
  • https://support.Mozilla.org/KB/what-Firefox-sync
  • https://support.Mozilla.org/KB/how-do-i-set-up-Firefox-sync

• What will be the price of the course and examination for VCAP5-DCA?

  I am currently a VCP5 and interested pursuing a VMware Certified Advanced Professional certification. I am aware that the DAC VCAP5 to the course and exam registration is not available in Q2 2012 but I need one approximate how the course and examination will be, if possible.

  Thank you

  For VCAP4-DCA, there were a number of recommended classes - troubleshooting, Performance, security, PowerCLI - but for VCAP5-DCA is only to optimize & scale.

  As Andrew says the training is not mandatory, but it will be useful.

• Can I use my product key for Windows Server 2008 after the downgrade to Windows Server 2003?

  Can I use my product key for windows 2008 after it downgrade to windows 2003?

  Hello
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.
   
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How will I know if a host is associated with a vCenter Server

  Once my 5.0 ESXi host is managed by / code with a vCenter server, there are some commands that you can perform only through the vCenter.

  In particular, all-hard drive size, whole-controller SCSI and Set-VMReservations.

  In case my vCenter is down, I would leave my script (PowerCLI 5.5r1) with a mistake that these operations cannot be executed until start of vCenter or the host that contains the virtual machine is no longer active with vCenter.  I think it's safe to let the user decide how he wants to move forward in this case and not build it in my script.

  Is there a cmdlet to ask the host if it is associated with a vCenter Server?  When you use VI Client to connect to the host, you can see the link in the lower right part of the Summary tab that says "separate host to vCenter Server...". ».

  The get-VMHost cmdlet seems like it should have this info, but I was not able to find.

  Thanks for your suggestions

  Maureen

  Please take a look to determine vCenter management host to see if that helps.

  André

• What will do to include current controlfile in the database

  Hello
  
  When you try to create a copy of the database, it still manages not to copy the controlfile
  What does take to include current controlfile in the copy of the database to the %b format
  

  RMAN> backup as copy database format 'd:\backup\%b'
  2> ;
  
  Starting backup at 13-SEP-10
  using channel ORA_DISK_1
  channel ORA_DISK_1: starting datafile copy
  input datafile file number=00001 name=D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
  output file name=D:\BACKUP\SYSTEM01.DBF tag=TAG20100913T204940 RECID=16 STAMP=729636617
  channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
  channel ORA_DISK_1: starting datafile copy
  input datafile file number=00003 name=D:\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
  output file name=D:\BACKUP\UNDOTBS01.DBF tag=TAG20100913T204940 RECID=17 STAMP=729636660
  channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
  channel ORA_DISK_1: starting datafile copy
  input datafile file number=00002 name=D:\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
  output file name=D:\BACKUP\SYSAUX01.DBF tag=TAG20100913T204940 RECID=18 STAMP=729636692
  channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
  channel ORA_DISK_1: starting datafile copy
  *copying current *control file**
  RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:36
  ORA-19715: invalid format b for generated name
  ORA-27302: failure occurred at: slgpn
  continuing other job steps, job failed will not be re-run
  channel ORA_DISK_1: starting datafile copy
  input datafile file number=00004 name=D:\ORACLE\ORADATA\ORCL\USERS01.DBF
  output file name=D:\BACKUP\USERS01.DBF tag=TAG20100913T204940 RECID=19 STAMP=729636697
  channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:01
  channel ORA_DISK_1: starting full datafile backup set
  channel ORA_DISK_1: specifying datafile(s) in backup set
  *including current SPFILE in backup set*
  channel ORA_DISK_1: starting piece 1 at 13-SEP-10
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/13/2010 20:51:38
  ORA-19715: invalid format b for generated name
  ORA-27302: failure occurred at: slgpn

  Published by: hrishy on 13 Sep, 2010 08:26

  Hello

  Try setting 'CONFIGURE CONTROLFILE AUTOBACKUP ON' - what makes your work

  -Pavan Kumar N

• What is is it possible to use the acl extended for split tunneling on ASA?

  I'm setting up VPN IPSEC RA on SAA and I would like to know if it is possible to use the ACL extended as part of the split tunneling?

  Thank you!

  Yes, you can use the extended ACL. See this example:http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-nex...

  Kind regards

  Averroès.

• What is APPEND hint specify the language lay new m for him

  I was reading abt management tables so I'm pinned the hint keyword appned please could explain what is it really?

  Oracle adds index keyword is a tool to bypass the use of existing (depending on your definition of pctfree) empty data blocks half empty chain of the freelist. Instead, Oracle extends from the table and uses blocks brand nine empty dead given for inserts. It results in more lines per i/o, acceleration

• Firefox crashed, I reinstalled and now when I use a new tab for an address I can not get it to load by clicking on enter. How to activate it?

  When I start typing in the address of my story captures the correct address, but the only way that I get to load is hitting the arrow button in the address bar. I want to be able to hit enter

  Hey Susan-MPC.

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. It could be related to an extension. Then you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  I see you are using an older version of Firefox as well. You can update. There are many advantages to the performance of the latest version of the browser.

  Hope this helps!

• No matter what advantage of having a virtual disk instead of partition for SQL server?

  have a quick question...

  I intend to deploy a new server in SQL on VMWARE 5.1 with super 3PAR storage (I'm not Administrator VMWARE, just an occasional driver).

  I'm going to d, e, f for DATA, the newspapers partitions, backup. Does make sense to create a disc of rtual for each partition instead of create 3 partitions on a disk of VMWare return Outlook - 3PAR?

  Thank you.

  I would recommend you create three virtual disks, because in this way you can easily put each virtual disk in a different level.

  Using a single virtual drive for all three partitions, you can't give different level for each partition... in any case if your storage supports a hierarchy at the block level, storage moves the hot blocks of vmdk to a better level.

• VCenter server by using domain ID and password to login

  Hello

  I wanted to connect to Vcenter server via powercli but its always takes my default windows credentials when I connect using Connect-VIServer-vcenter01 Server rather than my domain ID and the password. My credentials for vcenter server is different from the Windows credentials. Please let me know the command for the VI login server, by using the credentials of domain.

  Thank you

  vmk2014

  Cannot connect you with:

  to connect-viserver Vcenter01.domain.bla - user domain\user - pass the password