What will do to include current controlfile in the database

Similar Questions

• Currently, I have Lightroom 5.7 on my iMac and plans to subscribe to CC.  If I download and install CC LR, what will that make my existing pictures and the catalogue already configured in LR 5.7 on my hard drive?

  Currently, I have Lightroom 5.7 on my iMac and plans to subscribe to CC.  If I download and install CC LR, what will that make my existing pictures and the catalogue already configured in LR 5.7 on my hard drive?  Will be all (catalog, changes, etc.) perfectly synchronize?

  not exactly, transparently, but it's pretty easy to migrate to a new version of lr, Photoshop Lightroom Catalog FAQ

• What will happen?  It's not buy the work. Try now!

  Today is 23-mar-2016.

  What will happen?  It's not buy the work. Try now!

  Hello

  Please see to purchase FAQ: How can I share my membership creative cloud?

  Hope that helps!

  Kind regards

  Sheena

• Problem with the current SNA on the database pending...

  Hello;
  
  A day ago I went on our main database on the eve of database, everything went well. But today when I checked current SNA for the two database, I saw that the two were different. and current SNA did not change on the standby database. What can cause this problem?
  
  some exits here when I tried to find the problem...
  
  on the primary database.
  
  

  SQL> select thread#, max(sequence#) from v$archived_log group by thread#;       
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            156 

  on the database pending;
  

  SQL> select thread#, max(sequence#) from v$archived_log  where applied='YES' group by thread#;
  
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            156 

  standby mode
  

  SQL> select LAST_CHANGE#, STATUS from V$STANDBY_LOG;
  
  LAST_CHANGE# STATUS
  ------------ ----------
       2927636 ACTIVE
             0 UNASSIGNED
             0 UNASSIGNED
             0 UNASSIGNED 

  standby mode
  

  SQL> select current_scn from v$database;
  
  CURRENT_SCN
  -----------
      2916773 

  on primary

  SQL> select current_scn from v$database;
  
  CURRENT_SCN
  -----------
      2927809

  Published by: Ecimen on 01:36 18.Eki.2012
  
  Published by: Ecimen on 01:47 18.Eki.2012

  SQL > change database recovery managed standby database disconnect from the session.

  modify the recovery of database managed standby database disconnect from the session
  *
  ERROR on line 1:
  ORA-01153: an incompatible media recovery is active
  >

  Most likely you had missed the log files from the backup site. You can check in question "select max(SEQUENCE#) from v$ loghist. Most likely old log files has not yet delivered to the main site backup site. Another simple method that you can do is stop tio watch db, and then start it as a mode of editing if you have 11 GR 2 db which should be enough. Oracle will automatically synchronized between primary and standby for you. If you can't wait, you can start the editing for db in waiting mode, then run the command "recover the database sleep until cancel;

• What will be lost if I use a new database for vCenter Server?

  Currently, we use VC 2.5 U4 with database SQL Server 2000 Personal Edition.  We intend to migrate the SQL Server used by VC to SQL Server 2005 Express 2000 database.  We have tried the upgrade on-site of the VC database but without success.

  In this way, we will create a new SQL Server 2005 Express for VC database.  We would like to see more performance statistics, the following items will be lost?

  (1) resource pool

  (2) cluster configuration

  (3) connect to the ESX host

  (4) configuration of NIC in ESX host

  (5) the allocation of resources for each virtual computer

  We are very concerned by the Network Configuration of a particular ESX host that takes us a long time to repair.

  Thank you

  The ESX host network configuration will remain as it is a host level setting.  With regard to the other elements:

  (1) Yes, you will lose your Resource Pools

  (2) your cluster configuration, including DRS rules, etc. will be lost

  (3) you will need to add each ESX host on your vCenter Server

  (4) as indicated, you will not lose your network configuration

  (5) If you set resources in a Resource Pool, then you who will lose.  If you set it on the virtual machine itself then I believe that you leave this setting.

  You will also lose some other things, like all the permissions you applied at various levels of vCenter.

• "The current version of the database has changed since... "Error

  Now I downloaded my application at the APEX. ORACLE.COM and my workspace is PSGCA and I have problems with the page 310 - details of the Bill.  How can I get the APEX. ORACLE.COM gurus to look over the page?  I'm having a problem with the part detail of this master-detail page.  Specifically, if I add data or update data to the captain only section, no problem.  This is when I need to update the data on the detail starting with my problems section!  If I add to the start of the line, no problem.  If I add information to a field null, no problem.  The problem arises when I want to change the HOURS/DAYS and COSTS.  He will take the initial value, but if I want to change then I get the error "database version has changed since... »

  No indication of this error would be greatly appreciated!

  Do you guys need for me to add table definitions and sample data.  In the past, I was told that it was not necessary; everything you had needed was the page.

  Is this correct?

  Can I add data and table definitions?

  For some reason that I could reduce it to the format mask on the expenditures column, which has been

  999G999G999G999G990D00PR
  

  When I changed it to

  999G999G999G999G990D00
  

  everything magically started working.

  For people wondering about the PR:

  PR

  9999PR

  Returns negative value in . Returns the positive value with a beginning and end empty. Restriction: The PR format item can only appear in the last position of a model number format.

  Documents: http://docs.oracle.com/cd/B19306_01/server.102/b14200/sql_elements004.htm

  I'm not sure why this particular mask causes. Because checksums are generated, I ran this sql to take a guess:

  select
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp1)) md5_val1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp2)) md5_val2,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val1_1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val2_2
  from (
  select
  expenses exp1,
  to_char(expenses,'999G999G999G990D00PR') exp2
  from invoice_details
  ) a
  

  which produces this output.

  MD5_VAL1	MD5_VAL2	MD5_VAL1_1	MD5_VAL2_2
  C4CA4238A0B923820DCC509A6F75849B	4DF59D42C9EE6119AEB2ADC95E7B7CF6	41CF2677CC4EC9356DAD8E76DFB87448	41CF2677CC4EC9356DAD8E76DFB87448

  Still not sure, but maybe it's to do with how and when checksums are generated?

  A space of drawing here - as you can see there is no guru, ace or oracle badge under my name, so I'm sure

  I've made changes on page 310, make backup to 24 but probably is not serious because your application is local. Probably no danger of change your credentials and/or remove your application.

  impressive effort on the example. This helps us better help you!

• What effect resize file temp on primary does the database pending?

  We have a weekly work on primary that resizes the temp tablespace.
  STANDBY_FILE_MANAGEMENT = 'AUTO' so am I correct in the assumption that the changes will be transmitted and replicated standby, even if they are temporary files?
  I'll live with DG in 2 weeks and continues to think about questions like this!
  Thank you

  Written to tempfiles are not connected, so are not shipped to the standby database. Entries in the temporary file on the primary causing the tempfile wish do not cause the tempfile on the eve of extend. TempFiles on standby can be added/removed/resized independently in primary, even with STANDBY_FILE_MANAGEMENT = 'AUTO '.

  If the watch is purely for the recovery and remains permanently in managed recovery mode, then the day before will not even need a temporary file until after it has been activated in a situation of switching/switching.

• I'm looking to add Dreamweaver on my account, I already use Lightroom and Photoshop CC. What will it cost to

  I'm looking to add Dreamweaver on my account, I already use Lightroom and Photoshop CC. What will it cost to

  Please check the pricing on: pricing and membership creative cloud plans | Adobe Creative Cloud

• Datastore NFS changed IP, what will happen?

  Hello

  ESXi 4.0, 4.1

  If I change the IP address of a NFS with VM data inside store, what will happen?

  I believe that the virtual machine in this data store will be 'away' and I need to re - add in the inventory?

  In any case I can avoid this?

  Thank you.

  Fajar.

  Yes, it's the only option, either forced to do svmotion or add virtual machines.

  Thank you

  -A

• What and Whats is for number of workers to maintain the multilingual Tables?

  Hello. I want to install a new language for my EBS 12.2.4 I followed this document: requesting synchronization Translation patches (Doc ID 252422.1()

  During the process with the utility of Administration AD, it takes me entering the number of workers: "Ad Utilities can support a maximum of 999 workers. Your current configuration of the database supports a maximum of 8 workers. Oracle recommends to use between 4 and 8 workers. ""Enter the number of workers (4).

  What are the 'workers'... What is the purpose? How can I knoe what number I have to chosse?

  Thank you.

  His characteristic of adadmin.

  Basically, it divides the work going in number of threads to run in parallel based on the value you select.

  Normally, you choose by default, because it depends on number of processors you have.

  If you select more than the number of workers, more CPU will be used, you must be sure to select this setting.

  HTH

• What I need to import the database - impdp.

  Hello
  I question as what I need if I want to create the database form DMP fiir copy made by expdp full = y.
  Now I want to cretae this database by impdp full = y BUT I have an other paths (Windows system).
  Once a week I can finally cretae instance, instance of startup and now I struggle with this oracle 'user friendlY' to create the database.
  But what I need to import the database by impdp? I think that I need software Oracle - installed instance (oradim) and after (startup nomount) and what next cretae database? and adter import DMP file form?
  How can I create thid BD if I want the same, as it is in the dmp file?
  
  Thanks for the replies.

  Hi all

  As the paths are different and you did export using utility datapump

  During the import, you want your data files on different paths...

  Thus, you should use Remap_datafile for sure and (if necessary) Remap_tablespace

• They are willing to buy adobe first cc cc 2015 2014. What will be the "upgrade will be free? Thank you

  They are willing to buy adobe first cc cc 2015 2014. What will be the "upgrade will be free? Thank you

  CC is a subscription and you have access to each version that is currently available, including versiuons again when they are released. Premiere Pro CC 2015 is not available yet, but expected in late May.

  Mylenium

• What will change when I install Firefox ESR?

  Hello. I want to install Firefox ESR on top of my current installation, but what will change when I do? What is different about ESR?

  See, I downgraded to 40 FF due to the extension/add-on problems with 42 FF, but I don't want a browser not secure/unstable. ESR is recommended, but I'm confused about this. All my bookmarks, themes, modules, etc. remain the same? Is there a different update schedule, and how does it work? I really need help here.

  Thank you!

  It's a good idea to backup your profile first, but IMO you will probably not all problems when returning to Firefox 38 ESR. I did it in June - switch to Firefox ESR 38.2 of 40.0 Firefox. There will be no problem with Add-ons, unless a security patch would cause a problem with an add-on.

  Overall, the version of ESR is the same as the final version of Firefox 38, but with the security patches that came in later versions. No new or changed features which may have been in 39 through the latest versions of Firefox, just security updates. The schedule is the same for the Release and ESR versions.
  https://wiki.Mozilla.org/RapidRelease/calendar

• I support a very large school district running Firefox 3.6. What will happen at the end of life date? In the online environment, we test this week.

  I run the test center for a very large school district with over 120 students of k. We have a current deployed at base of 54 client machines of k using Firefox 3.6. We have not upgraded for many reasons, of which the most important is to remove the possibility of use in navigation private students and dealing with plugin-updates for the digital non-born (read dumber than a bag of hammers users) that make up the majority of the customer base.

  We test ESR now, but only discovered this end of life for 3.6 is tomorrow, 4/24. We are currently in the middle of the scale of the State of online tests. The question is, what will happen tomorrow, when the browser will end of life. ESR wiki mentions that "an update to the current version of Firefox Desktop will be available through the Update Service Application"

  So the main question is, are my students/teachers goes to get a popup telling them that they have updated the browser if we have already turned off updates? If so, can I I disable remote using SCCM, because there will be all sorts of havoc.

  Please advise as soon as possible and thank you in advance.

  An addon like https://addons.mozilla.org/en-US/firefox/addon/disable-private-browsing-pl/ can help, or http://kb.mozillazine.org/User:Dickvl / Private_Browsing_disable (don't forget, this is beyond what this forum can help you with if you need help making these changes).

• Upgrading RAM... what will happen on my cluttered Desktop?

  Re; early 2009 iMac 10.10.5 (2) x 2 GB RAM modules pre upgrade.

  When I go through the procedure of Exchange to my old for additional RAM modules and more new RAM modules, what will happen on my busy office, if anything?

  It is my understanding that links file that you drag on the desktop are stored in RAM.

  When I leave the current RAM modules, all that now appears will be lost, or much less accessible?

  Accessibility is the whole point to have them there.

  Am I worrying unnecessarily, or if I am save these file, image and video links very used somewhere?

  Nothing will happen.  The content of the Finder window is not stored in volatile RAM, but in the database and preference files to make them permanent, subject to your evolution, which is on the desktop at any time.