When Acer will solve the problem of 171 P3 with Intel 4000.I graphics have dated the BIOS not solution

It's rediculus $650 that when a product improved to 8.1 driver for the graphics card does not work. I reinstalled windows 8 and updated upgraded to 8.1 three times for nothing doesn't. Technical support is usless on all this problem, what say, is to reinstall the operating system.

After trying several drivers, I tried the original pilot of 8.0 for my P3-171 on the ACER site and it worked. I run the upgrade to 8.1 and my HDMI output works with this driver.

Tags: Acer Tablets

Similar Questions

  • After upgrading to IOS 9.1 my iPad2 crashes constantly and Safari takes more than 30 seconds for the loading of the page.  When Apple will solve these problems, given that the downgrade isn't possible?

    After that the IOS upgraded to 9.1 on my iPad 2, the unit has switched navigation performance and each app is lagging, and then crashes the device, to be hard restarts.  Changing such settings recommended in many articles does not improve these problems of performance or speed.  Given that the downgrade is possible, when Apple will release 9.2 to solve all these problems of performance?

    These are performance problems widespread in the complaints I've seen on many articles, even in this community and discussion forums.

    Uh, no.

    iPad 2 questions are far from "widespread".

    Each user who has problems with their brand of Apple devices claimed that their problems are widespread disaster.

    users of iPad 2, 3 and 4, like me, don't post troubleshooting forums if their iOS/updates updates update succeeded.

    Here are my updated list of corrections suggested for a model slow iPad 2, 3 or 4.

    Try to reset all the settings in the settings under general app and in the right column under restore.

    Try stories reset and delete/reset the caches in all web browsers you use.
    If you use Safari, these features may be in the application settings under Safari.
    Other browsers have their settings inside the running application itself.

    If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

    Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

    If you are using Safari is always causing issues.
    Try changing / using web browser third another, different.
    I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
    I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

    In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

    Try to turn the reduced movement.
    This is found in the application of settings in the general tab, in the left panel.
    In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
    You should see a significant performance increase on all models of iPad 2, 3 and 4.

    In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

    Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  • When Adobe will solve the problems of Photoshop CC 2015 with GPU?

    When is Adobe going to fix Photoshop CC 2015 crash when closing an image file open when you use the graphics processor? No problem with CC 2014.

    There is an update in the works, which should be out soon, but I don't know when it comes out and if only he will solve this particular problem.

  • When Adobe will solve its problems with CS6?

    I teach a class in RAW this quarter and I can not ask students to buy CS6 with its current problems, unless Adobe can guarantee that a solution is imminent. I have no way to communicate directly with Adobe, I have to use this forum.

    My problem current cs6, for more than a month, is the Adobe Application Manager requires me to send my registration once a day. This affects only Photoshop; I can open Bridge and RAW with no problems. If there is a difficulty, I have not heard of him. I updates, use a Mac and do not use more 16-bit processing.

    I'm sorry. It is a known problem that the activation team strives to address as soon as POSSIBLE:

    Trial is displayed when you open Photoshop CS6: http://helpx.adobe.com/photoshop/kb/trial-screen-displays-you-open.html

    I'm hoping for a solution in the very near future (weeks days/no)

  • When starting my laptop, a warning poster says c:\program can affect the function of other applications, appointing him to c:\prgram1 will solve the problem


    When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.

    Can you help me

    Thank you

    Original title: Cprogram


    Method 1:

     I recommend you put the computer to boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7


    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.


    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.


    Hope this information is useful.

  • Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram? And the Windows 7 Professional upgrade will solve this problem?

    Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram?  And the Windows 7 Professional upgrade will solve this problem?  Does anyone have this done successfully?

    Not all programs can use more memory, so if you have a problem you must specify what the problem is, with what program

  • I have Adobe CS5 Extended. Recently bought a Canon 7 d MK II. Camera Raw does not support the 7 d MK II. Can I switch to 6 CS? That will solve my problem? I'm going to lose my plug ins

    I have Adobe CS 5 Extended. Recently bought a Canon 7 d MK II. The 5 CS camera raw does not support the MK II. Can I upgrade Photoshop CS 6? This will solve my problem? I lose my plug-ins?

    Yes you can upgrade: $400 for the scope. Creative Suite 6

    CS6 supports Adobe Camera Raw to 9.1 present however, your operating system must be Windows 7 or superior and OSX 10.7

    You will not lose your plugins, but you will need to reinstall on CS6. Check with the manufacturer of plugin for specific updates CS6.

  • I agree with Ccider, try to talk to anyone from Adobe is a joke. It is, when Adobe will get the Quick Time 7 code inserted by Apple resolved question of blocking?  Like others, I touch PSE14 until they do.

    I agree with Ccider, try to talk to anyone from Adobe is a joke. It is, when Adobe will get the Quick Time 7 code inserted by Apple resolved question of blocking?  Like others, I touch PSE14 until they do.

    frankv11114037 wrote:

    I agree with Ccider, try to talk to anyone from Adobe is a joke. It is, when Adobe will get the Quick Time 7 code inserted by Apple resolved question of blocking?  Like others, I touch PSE14 until they do.

    I'm curious, what exactly is your problem?

    The system requirements for PSE14 and ss14 requires Quick Time 7 on Win or Mac.

    I just checked that I had not installed on my PSE14 on 10 to win Quick Time 7. No problem, but I rarely videos, and I have other viewing software like VLC media player.

    Just out of curiosity, I installed Quick Time 7 without problem.

    Wouldn't be a problem with Premiere Elements or Mac?

  • When Adobe will approve the Acrolinx for InDesign CC 2015 plugin?

    When Adobe will approve the Acrolinx for InDesign CC 2015 plugin?

    [Movement of the general, all Adobe forums lounge to a specific forum - MOD]

    Published last week... that's what you're looking for?


  • My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

    My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

    Brand: HP
    Type: laptop
    Model No.: Pavilion zt3000
    512 MB DDR1 RAM
    Thank you very much!

    Hi Dominic,

    Are you able to get into BIOS to make changes?

    If so, you can try to reset the default settings of the BIOS and check.

    NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

  • If I do a full reformat on my Vista laptop, is what will solve the problem - "Windows cannot check for updates" error code 800FFFF? Frustrated!

    I have a laptop that I use mainly for cloud computing and travel.  I have much stored on the hard drive itself and I spent hours trying to solve the problem regarding

    Windows can't check for updates, error code 800FFFF.

    I tried some of the recommendations varied on this site, but so far without success.

    If I just wipe my computer, and then start reinstalling everything from below upwards, will that solve the problem?  I know it sounds drastic, but I'm willing to do, and hopefully learn something in the process.

    I'm not computer specific read and write... so it would take me hours, wading through all the different corrections before as I find one that works.  That's why I'm considering a reformat.

    I checked for malware and repeatedly tried to system update readiness tool.

    Any thoughts?

    Some information on my system:

    OS: Vista Edition Home Premium
    Version: 6.0.6002 Service Pack 2 Build 6002
    Model: Inspiron 1525
    System type: X 86-based PC
    Processor: Intel Core 2 DUO CPU
    The version of the BIOS/date: Dell Inc. A16, 16/10/2008
    SMBIOS Version 2.4

    Hello Jason.

    I suggest you try the following:
    close and exit all the open documents or windows program you have open.
    Open Internet Explorer (only!) go to http://support.microsoft.com/kb/923737 
    [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
    Note => for best results, check the option to remove personal settings.
    1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
    1B. make disappear/close the pop-up window "automated troubleshooting! -then...
    c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

    2. closing of the session and restart the cool system & then run manually check the updates in Windows Update, etc, etc...
    When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
    If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
    Those that are marked as "optional" decline.
    Have infinite patience so that it scans and it's work.
    When you are prompted to restart Windows, please do. Allow it to restart.

    If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

    Note: Running aggressive mode difficulty he 50202 will result in a loss of the history of the update but will not affect the actual installed updates.

  • If I update to IE10 with Windows 7 Home Premium I will solve the problem of my Canon iP1300!

    Dear community Microsoft Support:

    I am a volunteer physician for 35 years and my computer is an asset to my work, I install each critical update Microsoft on every second Tuesday of the month.

    I upgraded to IE 8 and IE 9 and my Canon iP1300 will not print something on a webpage only from Microsoft word.  (I get "Enternal Error) when I try to print.  I reinstalled my printer, and all my drivers related to my printer and Windows 7 platform are up-to-date.  I have excessive security, but they are compatible and cause no conflict.  (I have never had any viruses, worms, malware, script errors, spyware or adware back to Windows 95 as I have used all of the platforms that Microsoft has put in).

    Please can you tell me if I install, IE10 on IE9 on Windows 7 Home Premium will I still have my "Favorites" or do I export them before upgrading.  (I'm more work, and to be honest I don't remember if my favorites will be retained when you install a more recent version).

    Please, if you know, what are the advantages and disadvantages of IE10 on Windows 7 Home Premium.  When I had IE8 I have never had a problem printing with Canon PIXMA, Ip1300 until I installed IE9. ,

    Microsoft unsuccessfully to solve the problem of printing page Web IE 9 is already installed, but does not solve the problem.

    Thank you very much in advance for your support.

    Best regards

    Dr. Hubert Hechabarria

    Thanks for the good wishes! The same thing for you and yours!

    Now, to answer your question. First a point for clarity. Hotmail is transitioning to Outlook.com (this is important because the Outlook application is provided with Microsoft Office). Yes, Outlook.com has a spell checker and Yes everyone will have to change to Outlook.com Hotmail.com

    Don't forget that IE10 is only a browser and that the Hotmail/Outlook.com is just a web-based e-mail accounts. For example, when I checked my email Outlook.com I used Firefox to access. I usually use Outlook (part of Office) to access my email accounts based on the web that I much prefer the feature he gives.

    Way to go with languages! I can barely keep up with English! * smile *.

  • When Microsoft will fix the problem they created with Skype.

    It's been more than 24 hours now that Skype has worked on my pc. When Microsoft will have their sh * t together and rectify the problem, they created with this program. Now it becomes ridiculous and smells of incompetence!


    Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
    There is also information and on the Skype Forums.

    There is an alert to update Skype system on the Skype homepage

    Skype - Support

    Skype - Forums

    It's the latest Skype Heartbeat information in date 27/05/2011:

    Skype Heartbeat - [MAJ] problems connecting to Skype and calls for a small number of users

    I hope this helps.

  • Microsoft will solve the problem of 'Wireless Mobile Mouse 4000'?

    Because the Microsoft Wireless Mobile Mouse 4000 scroll wheel is more fluid than the other mice, and is not "on the points of many applications (including Picture Viewer from Microsoft in Windows 7)" are not recording movement in the scroll wheel :(

    These applications will record the movement when you flick madly (exaggerate your move), but on the tread of the wheel normal, nothing happens.

    After research, I understand that this is because many applications read the signal coming to the "click" or "bump" a wheel of traditional scrolling to 120 units of movement.

    It seems that the fluid motion in the Microsoft Wireless Mobile Mouse 4000 sends in increments of 30 or 40 units and these programs don't scroll unless they get a signal of 120 (that's why you have to flip through wildly).

    It's sad because it means that I don't like the mouse and I won't buy Microsoft again unless they fix it!

    I recently bought Microsoft Wireless 4000 Mouse for my laptop DELL Latitude E6410. The laptop came with the default value to the pointing device setup application. I don't have Microsoft Intellipoint software. I have Win7 64 bit.

    Here are the problems with the scroll wheel I noticed when I bought a Microsoft Wireless Mouse 4000

    (o) the scroll wheel does not scroll through the items of the combobox when the combo did NOT fall down, but has the input focus.

    for example, control panel-> mouse-> pointers-> 'Plans' combobox.

    (o) the scroll wheel does not scroll the MS Office 2007 Ribbon.

    (o) in Word 2007, the Ctrl + wheel does not zoom out

    (o) the scroll wheel does not scroll the XML Notepad 2007


    This solution is not mine - it was on the internet already.

    It worked for me.

    I write this with additional measures for "how to get there."

    Go to the properties of the mouse-> Hardware tab

    Select the problematic mouse in the list "mouse HID-compliant".

    Click 'properties '.

    Go to the Details tab

    Select the "Device Instance path" in the combobox control.

    A value is displayed, for example: HID\VID_045E & PID_0745 & MI_01 & COL01\8 & 5538EC & 0 & 0000

    Note This value.

    Open the registry editor and navigate to:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HID\VID_045E & PID_0745 & MI_01 & Col01\8 & 5538ec & 0 & 0000\Device Parameters

    The "Device Instance path" is the path of the "reg" key that corresponds to this instance of the mouse.

    In the device settings, add the following keys of reg DWORD (32 bit)

    HScrollHighResolutionDisable = 1

    VScrollHighResolutionDisable = 1

    Delta = 120 (decimal)

    Remove the radio and put it back (this type of re - initializes the driver). You can choose to restart the PC, too - no matter.

    It should work.

    Initially, I didn't put the key "Delta". But because of this, it was scrolling as if I pressed the keys 'Home' and 'End' - that is, all the way to the bottom or the top. After the 'Delta' key, it worked.

  • This update will solve the issue of "beach ball"?

    Will this update the problem of 'beach ball' where my iMac freezes randomly & have to reboot?

    N ° there is no widespread problem in a first time. Update of a machine that has a pre-existing problem will not solve the problem. You need your fix.

    Download etrecheck, run it and post the report here. It will give information you on what can cause your system to bog down.

Maybe you are looking for