When firefox loads a script is run that opens another window. How can I find the script and stop it?
When I start firefox after a few seconds a tab opens on an advertisement site. I need to stop this way?
You may need to ad-ware on your system. It may not be of
an ad - the. Run an anti-malware program. One is called
AdwCleaner. It found and removed some stuff from my system.
Tags: Firefox
Similar Questions
-
I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session. How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings. It's a HP Pavilion dv4000 with windows xp? I have not all discs.
Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).
Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:
Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .Do the following to reformat the hard drive and reinstall the operating system.- Connect the PC to the power adapter.
- Close all programs.
- Click Start , click principally made programs , select System Restore and click on the PC recovery .
- When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
- The PC will restart.
- When the recovery of the PC of welcome message, click OK to continue.
- In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
- Restart the PC when prompted.
As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired). If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software. So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.
NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):
HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b
1. download & save the installer for WinXP SP3 on your desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...[Yes, you can jump SP2 if you run WinXP SP1.]
2. read & take into account:
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3. Follow the prompts. Be patient and restart twice when the installation ends.
4. make the resolution method 2 here (believe me):
http://support.Microsoft.com/kb/9431445. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.
[I do NOT recommend install IE7 through Windows Update.]
6. make sure that automatic updates is enabled; FC.
http://support.Microsoft.com/kb/306525Other references:
Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.
Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
XP"and select"Windows XP Service Pack 3 "5 steps to help protect your new computer before going online
[installation clean = new computer]
http://www.Microsoft.com/protect/computer/advanced/XPPC.mspxMeasures to help prevent spyware
http://www.Microsoft.com/protect/computer/spyware/prevent.mspxHow TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c
1. download & save the WinXP SP2 installer on your desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...[Yes, you can jump SP1]
1B. download & save the installer for WinXP SP3 on your desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...2. read & take into account:
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *. Follow the prompts. Be patient and restart twice when the installation ends.
3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3. Follow the prompts. Be patient and restart twice when the installation ends.
4. make the resolution method 2 here (believe me):
http://support.Microsoft.com/kb/9431445. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.
[I do NOT recommend install IE7 through Windows Update.]
6. make sure that automatic updates is enabled; FC.
http://support.Microsoft.com/kb/306525References with dubbing:
Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada. Reach
http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
XP"and select"Windows XP Service Pack 3 "Protect your PC!
http://www.Microsoft.com/athome/security/computer/default.mspxLearn how to protect your PC by taking the three simple steps
http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497... -
How can I find the WEP key for my wireless network so that I can connect to it?
How can I find the WEP key
Steps to find a WEP key:
1. open a browser (the program used to access the internet). The following process worked for me when using the
Internet Explorer, Firefox and Opera browsers, although I'm not sure it will work for other browsers (for example
Chrome, Safari etc.).
2 type the following in the address bar of the browser. If you use a Linksys router type in "192.168.1.1" and if
using a type of router Belkin "192.168.2.1". The address bar is the area where the Web pages are typed. It is important
When you enter there is NO http://www. before the numbers.
3. If everything is is well past that should open a page which says that Linksys or Belkin.
3. There may be the need of connection. When you use a Linksys if you don't know what are the user name and password, it may
always be the factory settings and then enter "admin" for the username and "password" for the password. If you are using a
Belkin router, the factory settings often come without password, click just send without having to type a password.
4. click on one) "wireless" or b) "settings".
5. click one) "Wireless security" or b) "wireless settings".
6. There should be a page with a specified WEP key.
7 writing it to the down/copy and use as you wish!
-
How can I find the installed version of Firefox?
How can I find the installed version of Firefox?
You run v33 right now. But you can still check two ways
- Click on the
button-> then the help icon (?) then on Firefox
- Type of topic: in the address bar
- Click on the
-
Vista Product Code question
I had a hard drive crash and had to move all the data again. Now, I get an error saying that my Visa is not an authorized version. How can I find the product key to reactivate? I don't have the sticker on the back and the software I have does not have the code? I bought this laptop DELL at Best Buy a little more than a year.Thank you.Hello
This problem may occur if you make a significant hardware change. See the link provided below.
Error message when you start Windows Vista: "your activation period has expired".
http://support.Microsoft.com/kb/925616
If the OS came preinstalled Dell you may need to contact Dell technical support for assistance.
http://support.Dell.com/support/topics/global.aspx/support/win7_support/win7_portal?c=us&CS=04&l=en&s=BSD -
When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?
Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.
Jim
-
When I get a bookmark and you think how can I find the folder it is in?
I click Favorites, and then click Show all bookmarks and use the favorite search box at the top right. I type in the name of the
I'm looking for bookmark and considers appropriate. How can I find the folder it is in?Without an extension, a possible way to proceed is to open the bookmark in a tab (possibly offline), then click the star on the Navigation toolbar to open the dialog box "Edit this bookmark" that shows the folder.
-
How can I find the album/albums in that picture in my library is included? I want to have all my photos in my own albums.
This isn't a feature of photos - tell Apple what you want - http://www.apple.com/feedback/photos.html
You can find all the photos are not in any album - file menu ==> new album, smart album is not a
LN
-
I have a yellow triangle with a 1 in it, but no other information that the program opens. How can I find the file?
I suggest that you only contact Snagit for assistance with this error.
http://support.softwarecasa.com/kb/browse/000938Thank you
-
Original title: redirection
When I type in a search on the web for anything whether it's IE, eBay or Facebook my PC just redirects research and opens another page, how can I rectify this
Hi Mark,Your computer is probably infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.Brian -
How can I find the subset of a table that corresponds to a set of conditions/conditions?
I have often encountered this problem in LabVIEW, probably the result of my Matlab based thinking on the tables. Suppose I have a 1 d array that consists of a real number between 0 and 2 (for example):
1.3 0.1 1.9 0.7 1.4 1.5 1.5 0.8 1.3 0.3 1.4 1.4 0.1 0.6 0.1 0.2 1.6 1.6 1.4 0.6 0.1 1.9
and I want to know the average of the subset of values greater than 0.5 and less than 1.2:
average ([0.8 0.7 0.6 0.6]) = 0.6750.
How can I find the subset of the array that satisfies the condition > 0.5 &<1.2>1.2>
For your example (values between 0.5 and 2) If you wish:
I would do something like this:
I have generated just a table of 10 random numbers between 0.0 and 2.0
The following loop sorts the data, using "range and force."
It then displays the data in the selected range.The last step is to take the average
I have attached the VI if you do not want to use the code.
-
How can I find the songs on my iPod that was deleted?
How can I find the songs on my iPod that have been deleted. while I was trying to download something. ? Thank you
original title: music deleted retrivingHello
Where the songs has been removed? Is it an iPod or computer?
If the songs are deleted from the computer then it will be there in the trash. But if you press Shift + Delete then it will get deleted completely. You will not be able to pick up the pieces.
-
HOW can I FIND THE CARTRIDGES ARE EMPTY AND that it FAULT REPLACE HP printer fax C309 using windows 7
Hello
Please use one of the following methods:
http://support.HP.com/us-en/document/c00257147
Kind regards.
-
How can I find the name of the photographer? How can I know the location of a photo when it's just a general title...
Hello
If you expand the keywords, this could give you a little more in detail. You can click on the username of the photographer to see their portfolio and you can search within their portfolio.
Thank you
Bev
-
You can move the inserted text to a different location on the picture, if yes how? How can I put the character and the Panel clause up in the photo shop when you type test?
Yes. I find it easier to type text, and then use the move tool (shortcut V) (looks like an arrow) to place it where you want.
To bring up the character and paragraph panels go to WINDOW > CHARACTER or WINDOW > PARAGRAPH.
I hope this helps.
Maybe you are looking for
-
About this mac shows twice as much audio I have in iTunes
I get errors that my boot drive is almost full on my macbook air relatively new (~ 4 months). When I went to study, I found that about this mac storage tab showed 42,96 audio GB 36,33 GB of apps, 33,42 GB else and insignificant small photos, movies,
-
Satellite A300 - 24 X PSAGQE: fan runs at full speed
Hello... I recently bought Satellite A300 - 24 X PSAGQE T and I have little problems with fan. The thing is, it does not work until the temperature rises to something about 75 degrees, but then continues to run at full throttle, even if the temp. dec
-
receive messages ox800co13b I get the message followed ox800co13b of MSOE > DLL when my computer is turned on it relates to Outlook Express and tells me that m C: drive is full, when it is not. Can someone help please! Thank you Terry
-
original title: missing file Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel. I tried to start - run with my c/d operating system I checked for viruses I purchase software to remove etc and REG files. Now
-
HP Dm4 1201tx grounded body when charging
I have a problem recently my computer hp dm4 1201tx laptop is connected to the earth when charging. You can feel its aluminum body is everything is connected to the earth when you touch it. Please help I can't understand why this is happening and im