When I export media it is much lighter than what I see in the program on the same screen

Similar Questions

• Document from Windows Media Player AND MS Windows open on the same screen

  Hello.

  I'm doing a very long media (recorded voice) transcript of court recorded on Windows Media Player in a document typed on MS Word (using Windows XP).

  I would like to know if it is possible to have Windows Media Player and my document strikes MS Word open on the SAME screen.  I am currently switch between two programs using my bottom toolbar.  It is extremely time consuming and not very well.  Ideally, I would like to open my Windows Media Player, in a small screen on the right upper side of my MS Word document.  This would allow me to work out of the same screen without having to click will result in my bottom toolbar to switch between these programs.  I'm sure that I explained properly :-).  ANY help, suggestions and advice will be highly appreciated.

  Kind regards

  AJS

  You should be able to do it by opening the two programs, then right click on the taskbar and selecting "Tile Windows vertically".  Just make sure that they are only two open programs.

  This screenshot shows WMP and WordPad, because I do not have Word installed, but it should work exactly the same thing:

  

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought and installed Lightroom 6.  It works but there is a message saying that my trial period has expired and when I try to log in to Lightroom on my iPad it says the same thing.  How can I fix it?

  I bought and installed Lightroom 6.  It works but there is a message saying that my trial period has expired and when I try to log in to Lightroom on my iPad it says the same thing.  How can I fix it?  I got a trial of Lightroom CC before I installed.

  allen456 wrote:

  Is there anyway that I can go to CC without losing all my investments in Lightroom 6?

  No, it is not AFAIK. You can try back LR 6 and then buy the subscription of photographers. You will need to contact Adobe about this.

  Note that this is not Adobe. This is a user to user forum.

  Do a search for Adobe product return.

• When I try to load a photo CD, nothing happens at all. The same thing happens with the help of CD audio.

  I put my CD in the drive and the only thing that happens is some sound then nothing. The CDs are not load as they did.

  Hello

  Next message will be on automatic/AutoRun reading where it is also a question AFTER you do these:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• 10 iOS does not well at all. Notes is much harder to change more before. The start screen is so clumsy. How can I get rid of all the widgets of the splash screen?

  10 iOS does not well at all. Notes is much more difficult to edit with touch screen as before. How can I erase my start of all the widgets screen? I might want to go back to iOS earlier.

  "How can I erase my start of all the widgets screen?" is the only question that you asked, so here's the answer:

  Some widgets may not be deleted, but you can move the widgets that you use most on the front screen and keep the ones you don't want a rear screen. Or, you can take the widgets you want and move them to a single folder.

• I downloaded and installed EnhancedVideoInstaller.pkg.  Now when I start my computer an empty white box flashes before it shows the normal screen.  How can I get rid of this program?

  I installed EnhancedVideoInstaller.pkg in a vain attempt to have an online tour of health care.  It shows in my downloads and activity monitor, it shows EnhancedVideo, but I can't get rid of.  When I start my computer an empty white box flashes by in-between enter my password and the splash screen.  I would like to eliminate it.  Thank you!

  http://www.howtogeek.com/231496/how-to-uninstall-applications-on-a-Mac-eVeRyThiN g-you-need to know.

• When I click on a particular bookmark it opens in a window in the same page of the browser which is open, but on the left side while I open two URL dirfferent

  I'll have to page open in the browser, and when I click on a particular bookmark it always opens in the same browser, but as a second page on the left side of the page. How can I stop this from happening - there is apage that I need to visit often for business and it is very limiting.

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.

  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B; Cmd + B on Mac).

  In the Bookmark Manager (bookmarks > organize bookmarks) you can click on the button more in the lower details pane on the right.

  Make sure "Load this bookmark in the sidebar" is not selected.

• my windows vista computer when its loading windows turns black and stops working then starts again and the same thing happens again.

  When I turn on my pc, the system starts the Pentecost a poblem but when windows Vista family premium starts to go the window that allows you to put the password it goes black after a wile it restarts and the same thing happens again.
  safe mode works I have Dome system restore format and reinstall windows and happens again :(

  Hi LGStrike,

  Restore your computer to a point before the updates being installed with the System Restore.  Then proceed as follows:

  1. go in Control Panel , and then select Windows Update.

  2. click on check for updates.

  3. once the results come back, click on the link that shows Important updates and deselect all the updates except the first 3 or almost and install the updates.

  4. Repeat steps 1 through 3 until you receive the error message.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I connect to Windows 7 after that my laptop has been asleep, the Welcome screen will have 10 minutes to go beyond.

  When I connect to Windows 7 after my laptop has been asleep, the Welcome screen will block for always (10 + minutes). It does not every time, but maybe once all 5 or 6 times and it's happened lately. I can just shut the computer off and the newspaper with no problem after starting it upward, but I'm afraid, there may come a time where it does not work.

  I had this problem since I got my computer 2 months ago so I don't think it's related to what I have installed. Has anyone else encountered this problem and has found a way to fix it? Is this a common bug in all of Windows 7?

  original title: Windows 7 stuck on the Welcome screen

  Hello

  Safe mode - repeatedly, press F8 as you bootup. Another method is to start - type in
  Search-> find MSCONFIG in top box - just right-click on it - RUN AS Admin Startup tab
  -check the Safe Boot (network) APPLY / OK. Don't forget to change it if necessary.

  Try a system restore before what happened: (you can run system restore
  in the Windows as well however it sometimes works better in safe mode-
  repeatedly press F8 as you start.)

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ==========================================

  If it is mounted on the homescreen?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  
  ======================================

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the same scale of assessment pr

  I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the pillar of satisfaction even scale and then only switch products bronze... a simple task of worm. For this reason I have is no need to upgrade my old version of Photoshop. My problem is that it doesn't work anymore since Windows 10 recently installed in my PC. IO have tried to install it several times but can't. Is anyone out there help me please!

  Activation for CS is closed. Adobe provides you with a free replacement of CS2.

  Uninstall CS

  Go here: Download Adobe Acrobat 7 and Adobe Creative Suite 2 products

  Click English, download Photoshop CS2 and also copy the serial number that comes with it.

  Install CS2 and use this serial number CS2. There no need activation.

  Take your copy of the CS, it is no longer usable.

• The volume when a single track editing comes down lower than multitrack playback. Why the two do not match?

  When I click on a single track in a multi-track file to change, the track only plays not returning to the same volume as in the case of multi track.  If I increase the gain of the single track, it makes a permanent change.  I am a newbie on this program.

  Volume of multitrack playback depends on the parameters of mixer, and also if there is no gain in any effects you use. Reading Waveform depends only on your volume control setting - the software will not influence it in the slightest. The only other thing that will make the difference is the way you control pan set up - the default condition will give a 3dB reduction level in multitrack, unless you compensate with the master fader.

• How to export my 'action' in photoshop cc2015 to another computer (PC) with the same version of photoshop?

  Hello

  I have a prob with my pc on w10, I want to reset it and I ask how to export my 'action' in photoshop cc 2015 to my new installation of the w10

  Maybe my screening are saved in the cloud, but I do not know...

  could you please answer me before as I have format my drive C: / and I porecess to the new facility.

  Thanks

  Hi nicolasp,

  Follow the steps below to record your actions:

  • Open Photoshop and go to the window actions
  • Select an action and click on the drop down at the top right and choose Save Action > select the location to be saved
  • You will need to perform the same step for all the actions that you have

  

  If your shares are purchased, they must be registered the slot location. You should check here:

  C:\Program Files\ADOBE\Adobe Photoshop 2015\Presets\Actions CC

  Kind regards

  Claes

• When I export a PDF document, half of my text is blurred in the Viewer. However, it prints very well. No idea how to fix?

  I have created a PDF file and for some reason when I discovered in Acrobat Pro or Adobe Reader half of my text is blurry. I tried to export a handful of different ways the two spectators. The text is blurred, but it prints fine both players. What is the reader, the user with the pixelation, CMYK, RGB error? I have really no idea. Is attached a screenshot of what it looks like. I export from Indesign features of illustrator files are linked and printing very well. I'm working on a MacBookPro and my printer is an Officejet 6700.

  

  I have fixed the problem. It was something with the color of the text and the values of k. I pointed out all of the text in the text box, including the text that is not blurred and made sure to transform any return to the true black with no line. From there on, I changed my text in blue to the color I got it. Exported without maximum loss at 300ppi. everything seems to work properly and now the PDF is superb in the Viewer.

• I designed a site with once Acumin... When I export it as html and load it on my Web server the police is not the same, I think it's arial then...

  When I download the site directly from muse for a test-businesscatalyst-la police website is correct, but I have different font color in the footer. I designed the color to white (masterpage) but I see it in black.

  local Muse in the preview all sounds good...?

  Yes, you're right Jason, this is a bug known to us and very soon it will be fixed in the next update.

  Kind regards

  _Ankush