When I make a selection using the lasso and try to copy the selection, nothing is copied.  Why?

Similar Questions

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.

• That's why when I use the light flees to sequelae why it stops when I'm in the middle of a ram preview?

  That's why when I use the light flees to sequelae why it stops when I'm in the middle of a ram preview? also any idea on how to make both and and how to increase the ram?

  Please answer me when you can

  Tthanks

  FAQ: Why preview RAM only play in my composition?

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

  Mylenium

• Is it possible to make a slipstream using the recovery CD (SM30-154 WXP)?

  Is it possible to make a slipstream using the product recovery (satellite SM30-154 pro and windows XP home) and put on day of windows XP sp 3 die?
  If so, how?

  friend
  Bert

  Hello

  What you could do is to create a new image using a 3rd party such as Norton Ghost for example application.

  You might first install Windows XP using the Toshiba Recovery CD.
  You could install the MS 3 service pack and then you can create the new image.

  This image could be stored on the new CD, or as a file on the second partition.

  I did it too. I ve got two partitions on my HARD drive and have created a backup of C (System partition) by using the spirit. The file is stored on D (data partition) and if something goes wrong with my Windows I can restore using this file.

  Easy ;)

• I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

  original title: Error Message 0 X % 1 in the message file for %2
  I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

  How I can fix

  Hi SusanReid,

  1. what email program are you using?
  2. you are trying to download from webmail or any mail client?
  3. don't download you and save the attachment or open it directly?
  4. What is the brand and model of the printer?

  I suggest to save the attachment and then print.

• When I do a search using the Firefox browser or Google engine, I want only a page of research. I scroll, FF will now automatically load the 2nd page?

  When I do a search using the Firefox browser or Google engine, I want only a page of research. That I have scroll, Firefox is now automatically load page second, third, etc., as a scrolling down. How can I stop this?

  Could you give the address of the search results page where you get "loading without end? It is not normal that the standard Google search engine plugin that comes with Firefox, but you might have a different plugin.

  Some add-ons have this feature, including those with similar names to the 'autopager"and probably many others. You could review your active extensions on page modules. Either:

  • CTRL + SHIFT + a (Mac: command + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, take a critical look on the list on the right side. I suggest turning off one you forgot to install. Those who have Options buttons may be worth exploring to see if it is a feature, you can disable.

• How can I get rid of the background yellow when I display an image using the photo viewer?

  Original title: Windows Photo Viewer

  How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.

  Thank you

  Ed Fuller

  How can I get rid of the background yellow when I display an image using the photo viewer? It gives images a yellow cast.

  Thank you

  Ed Fuller

  Hi Ed

  See the following for the patch thread.

  Windows 7 photo viewer shows images with an orange and yellow tint:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/window-7-photo-viewer-shows-pictures-with-orange/e5d31c5e-ae84-4EBD-bbe9-9428f410560b

  Concerning

• I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?

  I'm trying to export contacts as vcards icloud.  However, after that select the contacts and click on "Export as vcards" nothing happens.  Why?  I tried this using edge and chrome and I run Windows 10

  I just tried with edge on Windows 10. I selected all the contacts, and then click Export, as vCards and nothing happen. Clicked on it again, still nothing. After 4 or 5 click on about 10 to 15 seconds he finally uploaded to the file Edge uses for downloads. I saw it happen before you go to a Mac using the Safari browser, but only 2 clicks were necessary.

• When using Sky go and try to watch movies or programs how do I get to run continuously without interruption and catch every few seconds.

  Go to sky

  When using Sky go and try to watch movies or programs how do I get to run continuously without interruption and catch every few seconds.

  The usual cause of this is that your broadband connection is not fast enough or you have multiple computers, try to use it at the same time.

  This allows to check your speed broadband http://www.bbc.co.uk/iplayer/diagnostics#results

  If the broadband speed does not seem to be the problem, please contact Sky

  http://helpforum.sky.com/T5/using-Sky-go/BD-p/skygo_using

• UCCX 10.6 - Error Message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again"

  Hi guys,.

  My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.

  Can I help me, please

  Thank you

  Wilson

  These newspapers are not in a readable format. Look for something like lost connection

  Concerning

  Deepak

• When I type my site in the browser, nothing comes but if I add/index.html, there is no that's happened help?

  Hello

  My problem:

  When I type my site in the browser, nothing comes but if I add/index.html, there is no that's happened help?

  for example:

  = Google.com comes up with error (cannot find the page)

  Google.com/index.html = comes with the home page

  How can I fix it? any ideas?

  Thank you

  Hello

  Contact your Web host so index.html is the launch of your site page and then it works perfectly.

  Concerning

  Vivke

• I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  Ah, hong.

  Then, drag Option and only use Cmd + shift.

• When I make a video using CC and try to import a piece of music I get the response "could not complete your request because DynamicLink is not available.

  When I do a video using CC and try to import a piece of music I get the response "Could not complete your request because DynamicLink is not available" - any ideas please?

  Could not complete your request because the DynamicLink media server is not available. | Error postal codes of Mylenium

  Mylenium

• Make Image more using the Web Service and Ksoap2

  Hey all, I was wondering if someone can help me with a problem. I use a .net web service that grows on a collection of person objects when a person runs a query from the blackberry phone. To implement this I'm using ksoap2. In my service, I'll send in a string as a parameter. I returned the collection of people that contain the firstname, lastname, address, race, sex. I also try to send a picture. Now, I got this works very well when you do not include the image settings.  In my class on the side of .net in person my class, I have 'image' public property which is a string. I get the bytes of the image and convert it to a base 64 string:

  MemoryStream ms = new MemoryStream();

  System.Drawing.Bitmap.bmp = new System.Drawing.Bitmap (imagePath);

  BMP. Record (MS, System.Drawing.Imaging.ImageFormat.Bmp);

  p.Image = Convert.ToBase64String (ms, GetBuffer());

  BMP. Dispose();

  Mrs. Close();

  Note: in my outings, I see the 64Encoding string.

  On the side of blackberry, I have:

  Byte [] imageArray = ((person) personVector.elementAt (i)).image.getBytes ();

  EncodedImage = bitmap

  EncodedImage.createEncodedImage (imageArray, 0, imageArray.length);

  gridMgr.add (new BitmapField (bitmap.getBitmap ());

  Unfortunately, my number of vector appears as empty and I keep get get a parse error. As I mentioned before, if I remove ownership of the Image on both sides, it works like a charm.  I tried to use just about everything. Any ideas on how to overcome the image using ksoap? I tried to make the image property in the two classes as arrays of bytes, but he had no success. My problem when you use the byte array was in the class of person on the side of the blackberry for the PropertyInfo, that I didn't know what to use (for example STRING_CLASS, OBJECT_CLASS, LONG_CLASS); in any case, neither worked. What do you suggest me?

  I was able to do successfully the bytes of the image the device in the following way in my seriealize class.

  In the getProperty method, I use the following:

  info.type = MarshalBase64.BYTE_ARRAY_CLASS;

• How to make a call using the ip address

  Hello! I'm very new to telepresence system and wanted to know about calls of one endpoint (Te MX300) to another (Fe SX20) using their IP addresses (public or private). I saw in the configuration guide they make calls through IDs or URIS, and they need to guard/SIP proxy for that, but how can we establish the connection through their ip addresses without additional devices, of the right endpoints?

  Thank you

  Hi Zhomart,

  I assume you want to directly (without using the gatekeeper) call the other end points using the IP addresses.

  It's very simple.

  Use the remote control and punch in the IP address that you want to dial, make sure you only select as a H323 Protocol.

  The composed IP address should also be accessible.

  Kind regards
  Sagar