When I press the letter A while an email is highlighted it disappears, he disappeared?

Similar Questions

• I bought a book and he won't let me see it. The application closes automatically when I press the book

  I bought a book and he won't let me see it. The application closes automatically when I press the book

  You tried to delete the book and it redownloading via the tab purchased in the application and if that doesn't fix not tried to close the iBooks app via the phone to taskbar (Force an app to close iOS - Apple Support) and/or tried a soft-reset/reboot the phone (press and hold the home and sleep buttons for about 10 to 15 seconds, ignore the slide to power off) after which the Apple logo should appear and it should restart)?

• PowerEdge T410 won't do anything when you press the power button / stop.

  My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

  -Who-

  I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

  Problem solved

• When I press the Start button, the OS logo flashes very quickly, then windows flashes very quickly

  Original title: Startup problem

  When I press the Start button, flashes very quickly, and the logo of the operating system and then flashes windows very quickly, then connect to flashes of password and then the screen goes dark (the monitor is turned on) and nothing more.  Before if I turned off the computer, the sequence starts returning to normal and I could log on.  Now, I only get that quick flashes and then nothing, what can I do to log on the computer?

  Hello!

  I had a somewhat similar to this problem and that's what I tried.

  He temporarily stabilized my problem but I have a serious type of divorce

  problems with my beloved once Windows 7. However, in your case, it may be

  the solution.

  This is the procedure:

  (1) power on your PC or laptop

  (2) when he started, start pressing and releasing the F8 key till you get the windows

  Fix the Page (I don't remember the exact name, but it's a screen with many options).

  (3) among the options is "Last known good Configuration", click it. See if that fixes the problem.

  (4) If this does not work, then you need to try other options, namely:

  (A) the Startup Repair

  (B) the system restore

  (C) verification of memory

  (D) command prompt:

  (The last option would have been a godsend, but it does not work in the console command prompt.)

  I'll tell you about it...)

  If all the above methods fail, try this method (it worked for me temporarily). This method is an option only when you

  are able to access the above page and when you have administrator privileges. Then, when you're on the screen above, you will see these options:

  Safe mode

  Safe mode with network

  Choose the second option. If all goes well, you will be at the level of the office. On the desktop, right click the command prompt icon. If you don't have a shortcut cmd, no problem. Press start and type cmd or command. Right click on cmd and then click "Run as Administrator".

  * Now in the command console, type chkdsk/f/r (the space after the chkdsk command is optional). You may get a message that you can schedule chkdsk at the next restart, treatment is (Yes).

  *  Then, in the same type of console sfc/scannow. If all goes well, it will rectify errors of all the files on your system.

  Note: If you please ensure that your battery is 100 pc loaded before you try it. or better yet, let him charge while you do this.

  Keep me posted.

  All the best!

  Abgrall

• When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time!

  When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time! I installed the uprgrade and also did a virus check everything seems ok! I need a solution cause mozilla's browser that fits me better!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Problem when I type the letter "o".

  Hello to the Forum

  I have a strange problem with my laptop which began just today that the problem is when I type the letter "o".
  in a sentence, the cursor jumps to the beginning of what I typed. It affects all the programs I need to type
  That is to say for laptop, desktop, explore. Does anyone have some knowledge how can I remedy this?

  Hello

  First of all, it would be interesting to know what laptop you have.
  Secondly the cursor jumps around only by pressing the O key or also different keyboard keys?

• IPhoto crashes when you press the info button

  Since very recently, IPhoto crashes every time when I press the info button to enter people information a photo. I have version 9.4.3. running on OSX version 10.8.5. I added the first lines of pages and the pages or error report, if that can help anyone. I tried to repair the basis data, but without success. I am very grateful for any advice on this issue.

  Process: iPhoto [552]

  Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto

  ID: com.apple.iPhoto

  Version: 9.4.3 (9.4.3)

  Generation information: iPhotoProject-720091000000000 ~ 1

  App item ID: 408981381

  The external application ID: 15017489

  Code type: X 86 (native)

  Parent process: launchd [139]

  User ID: 501

  Date/time: 19:50:47.475 2016-01-04 + 0100

  OS version: Mac OS X 10.8.5 (12F2560)

  Report Version: 10

  Interval since last report: 34492 sec

  Crashes since last report: 3

  Per-App interval since last report: 905 sec

  Per-App crashes since last report: 3

  Anonymous UUID: 23235B01-625D-2A47-6A8F-352C3092B10A

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000c53b6a10

  If you use iPhoto 9.4.5 or an earlier version, iPhoto will crash whenever you try to use maps. It is no longer supported.

  See:

  The first versions of iPhoto 11 started to plant for many users suddenly last month.

  There is a problem with the functionality of the site, because Google maps will no longer be supported.

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• Bug when I press the < TAB > key

  How to reproduce this bug:

  In new VI, create a Boolean value and control on a tab on the front panel control.

  On the block diagram-> insert this control in while loop.

  Right click-> properties-> navigation key boolean Control-> click on "ignore this tab control.

  Right click on tab-> properties-> button Navigation control-> click on "ignore this tab control.

  Change Set tabs-> 0 for boolean choice order and 1 control of tab-> order

  Now move boolean tab control and run...

  When you press the key, there is a bug.

  How to fix this problem... ?

  I want to disable the tab key, but I have a lot of control... There is a solution for disabled tab key only once?

  I work with Labview 8.5.1 but I tried with Labview 2010 students and there is a bug too.

  Thank you very much for your help!

  

  (I give you an example, just run and press )

  It is an interesting bug.  I'll take a look at it and possibly to submit a request for correction.

  An idea might be to filter the Tab key before LabVIEW manages:

  

• How to save the data to the new file, when you press the button

  Hello.

  Run a program that reads data recorders seconds and displays a trace on the screen.

  What I want, is that when I press a button, the program will ask for a file name and begins to record data to the file, and continues to do this as long as the button is pressed.

  When I press the button again, the program asks the name of the file again, so I can select a new file to write.

  I've included a simplified version of my program that works by asking the file name at the beginning.

  How can I change the program it starts a new file every time that the key again.

  Kai,

  I changed the example that I gave you to LV8.0, but I have never used the option 'Save for the previous version' before, so I don't know if it will work.

  I have combined the start and stop of recording in a single button (just change the text to all what you need) and I used the 'value' property to pass the path between cases. The path can be formatted as you have in your version, don't forget to use the string conversion function filepath.

  Just in case where it doesn't work on your version of LV I've attached a screenshot of the block diagram.

  Hope this helps, let me know if you have more problems with this.

  Easy.

  Darren.

• Crash when you press the [...]

  I got various random crashes when you press the button [...] in the various 9.0.1, CVI function panels but I have not found a model so far.

  1. open Control Panel function for SetCtrlAttribute
  2. for "Attribute of control", press the button [...] and select the item of «Format"under «Format and precision...» "found under"control settings.
  3. press the button [...] to 'value of the attribute.  For me, he won every time CVI.

  Thanks in advance for any help!  If all goes well, there is a quick fix that I find this feature very useful.

  Hello

  It is a known issue with CVI 9.0.1.  This link should fix the problem for you.  Let me know if it does not work.

  NickB

  National Instruments

• Selected pass contains a string indicator combo box when you press the Enter key

  Hello

  How to pass selected contains a string indicator combo box when you press the enter keyboard key?

  Right now I use a button to send the command selected in the combox to string indicator.

  The photos shows a combo box with the button that I use to send to the indicator as example.

  After the user selects the text to pass, "send the cmd" button must be pressed to pass the string.

  I need to pass the selected string when the user press enter on the keyboard rather than press the button 'send cmd '.

  Kindly to you needing help.

  Hello

  You can use a structure of the event to capture keystrokes and filter, transmit only the drop-down list box "value of the indicator of channel when you press the return or enter key."

  Let me know it the joint allows an example (in LV 8.6).

• My laptop continues to turn upside down, left or right when I press the left/right click or even move my screen a little.

  My laptop continues to turn upside down, left or right when I press the left/right click or even move my screen a little. My problem is not how to go backwards, his way to completely stop it help please?

  Original title: windows 4540 s probook

  Hello

  What version of Windows are you using?  Windows 8?

  Right-click on the desktop > select screen resolution

  Uncheck allow the screen to auto-rotation

  Click OK

  Using the keyboard:

  Winkey + O (letter alpha) is to switch the feature off or on

• My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

  Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

  Hi John,.

  Please let me know exactly what happened when you tried my suggestions of first and second.

  Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

  When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

  With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?

  Tricky

• When I press the 'return' or 'up' button, files always bring me to the top of the list.

  When I press the 'return' or 'mounted' in any file button, it always happens show the top of the list of files or folders, not where I was. Let's say I'm looking in a file and got all the way to a file starting with "M" - when I double click on the file, and then click the back button, it brings me to the beginning of the alphabet (aka, at the top of the list of files/folders) and I have to scroll all the way down to where I was. I don't remember all the previous versions of windows, in doing so, but I could be wrong - if it is a new feature, is it possible to turn it off?

  I want to emphasize - I have seen a lot of suggestions dealing with this problem on the internet, but not what I'm looking for. This never happens for me on the internet, ONLY in the files of the computer.

  Thanks in advance for your suggestions!

  Hi CFive,

  This detail of navigation seems to be design / in the XP operating system by default. There is no way to disable or change this feature.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.