When I run an update on the security of Microsoft works 8, I get "failed", code 646. What is the problem?
I get this message when Norton runs its updates. The code failed 646 has been coming for a while now.
Hello
Follow the steps in the link below and check if this can help: code error '0 x 80070646', '646', or '1606' running Windows Update: http://support.microsoft.com/kb/2258121
Tags: Windows
Similar Questions
-
Update of security for Microsoft Works 9 (KB2754670) has "failed" to update on several trys
-
a security update for microsoft works 8 kb977304 with error code 646
Has had a warning of "new updates are available" in my pc - windows vista.
Tried several times and IMPOSSIBLE to download MICROSOFT WORKS 8 KB977304 with error code 646.
Help, please. Thank you
See this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47>
Please let us know if that helps.
06/20 / 1107:45:19
-
Update of security for Microsoft Works 9 (KB2680317)Error code 646
Hello
Follow the instructions in the link:
You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update
http://support.Microsoft.com/kb/2258121
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
It will be useful.
-
Updates to security for Microsoft Works 8 (KB977304)
Why didn't - he constantly important updates of security for Microsoft Works 8 (KB977304) who fail to install on my computer? Thanks to anyone who can enlighten me.
Without more information, there is no way to advise you as to why the update fails.
Have you tried manually download and install the update?
Instructions
- Download the file by clicking on the button download (above) and saving the file on your hard drive.
- Double-click the file .msp on your hard disk to start the Setup program.
- Follow the instructions on the screen to complete the installation.
TaurArian [MVP] 2005-2010 - Update Services
-
I recently bought a new computer, when I run Windows Update there is a process called TrustedInstaller.exe, taking 100% of one of the cores for a very long time (> 20 minutes).
I have vista 64 SP2 and all updates installed (took me over 3 days to complete).
Also, when I try to install additional features of windows (for example. IIS) the same thing happens, trusteinstaller takes 100% of the base and install new features forever.
I have not installed additional software so far is very little probable that a virus or spyware is the cause. When I'm not updating the an or install features of windows, the computer running quickly and the cpu load is not high at all.
How long was the computer connected to the internet before you installed Avast?
Can update you Avast manually?
The above, see if a reset fixes the problem:
How to reset the Windows Update components?
[Access KB971058 Internet Explore 32-bit only; [Throws the difficulty in DEFAULT and AGGRESSIVE modes, and then restart & test]
http://support.Microsoft.com/kb/971058~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
When I try to update indicating the error 8024402f please fix this
When I try to update indicating the error 8024402f please fix this
Why did you switch to Win7?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
You may encounter temporary connection [e.g. 0x8024402F] errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941How to reset the Windows Update components?
[Skip the section to APPLY to; run the difficulty in default and aggressive mode]
http://support.Microsoft.com/kb/971058~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Error number: 0x8024D001 when you run windows update
Here's my situation, I wiped recently my installation of Win XP Pro x 86 original seven ' 07, now running in the title error when you run windows update after reinstalling.
A little of what I've done already;
- http://support.Microsoft.com/kb/2497281/en-us
- I went through the steps to download and win xp sp3 app, have always error WU (will abreviate Windows Update this for now).
- To run Microsoft fix it found 50777 persists.
- Has been through the steps in the method 1: save the Windows Update files. Problem persists
- Spent by method 2: replace the folder C:\Windows\SoftwareDistribution Windows Update. Problem persists.
Next
- Check which version of the .net framework is installed. Found v2.0.50727 (I was referring to this page http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-xp-update-error-number-0x8024d001/d3f8b64e-0532-40ec-beb4-0bea856d1ef3 )
- When running .net Framework 2 sp 2 (downloaded from http://www.microsoft.com/en-us/download/confirmation.aspx?id=1639 ) I receive an update confirming that it is already installed.
Other
- Set the firewall disabled (I know it is not recommended, but until it's resolved I leave it)
- Internet Security in IE8 is set to medium
- IE v8.0.6
- IE 8 privacy set to low temperature
Help please? :(
First, download the .NET Framework here repair tool:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=30135If this doesn't fix the problem. try to run .NET Fixit recording:
http://support.Microsoft.com/kb/976982/en-GBOr the other of these two should solve the problem for you, but in the case where it is not, then here are some alternatives:
-
Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
I have also recently set up a wireless network.Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good.
-
I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.
I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE
Sorry, the MSE tool is to set the MSE when its broken.
UAC controller Tool v1.0 can be used to control the
The UAC settings.However, I suggest you restart the PC and after BIOS hold the F8 key
and when the Windows Startup Menu appears, select Mode safe mode with networking.Now, you will enter Safe Mode. On the page to connect, you will see the
Standard Windows administrator click it to open a windows session, press and hold
in mind, the password can be blank.Once you have done that make a new account administrator and giv it a name.
Restart the PC. That you did this newspaper using the new account.
Once you have done that decide what to keep with your current administrator
account once you've done it restart the PC, BIOS hold down the F8 key and
Select Mode safe mode with network and enter dependencies the Standard Windows administrator.Go to control panel-> user accounts control and security for the family-> user accounts, then
Select manage another account. In the list, select the administrator account
your select and then delete the account, then it will ask you if you want to keep
files etc, it's your own decision. Itknowledge24.com -
Error code 0 x 8024005 when you run Windows update
After the upgrade to Windows 8, Windows 7, I get this error code when you run Windows Update. "There was a problem of updates"
Errors found, Code 80242005.
A bug with a fix? Where is the difficulty? I have not yet found an and its been months now... anyone find a fix for this problem in addition to suggestions from Microsoft that don't work?
-
I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3
Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.
-
Windows Mail is not refreshing since 09/02/2012. When I try to update using the F5 key, I get the error messages. The only way I can see me new emails is to sign on the web page of my Internet service provider, which I don't like.
original title: windows mail is NOT refreshingIt would be useful that Microsoft has put a notice to have several products access our email accounts so that us non-technical people could avoid these problems.
Maybe it's something that Apple should warn the consumer. I have three e-mail accounts and I receive and send all the accounts on three different computers at the same time and have never had this problem. Your case is the first.
-
Cannot update an update of security for Microsoft Works KB2754670. Error "646".
Original title: I am unable to update an update of security for microsoft works KB2754670. I get an error of 646 code can you help me.
I'm unable to update an update of security for microsoft works KB2754670. I get an error of 646 code can you help me
Hi ValerieStansill,
Thanks for posting your question in the Microsoft Community. We are happy to help you!
From your problem description, I understand that you cannot install the update of security for Microsoft Works KB2754670 and the error 646. Please correct me if I misunderstood the question.
Question: This update problem occurs when Windows Setup encounters an error. Error code 0 x 80070646 and error code 646 are generated by Windows Installer. These generic errors indicate that Windows Installer has encountered a problem. The problem may be caused by an incorrect value in the registry.
Before troubleshooting, I need to ask a few questions.
- Are you facing this problem with this update or with all the updates?
- Did you recent hardware or modifications to the software on the computer before this problem?
To solve the problem, try the methods and check after each method:
Method 1: run the Microsoft Fixit to solve the problem with Microsoft Windows Update is not working.
http://support.Microsoft.com/mats/windows_update/en-us
Method 2: Try to download the update and install it manually:
Update of security for Microsoft Works 9 (KB2754670): http://www.Microsoft.com/en-US/Download/details.aspx?ID=34822
Method 3: You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update: http://support.microsoft.com/kb/2258121
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
If the problem persists, post your reply with the results. We are happy to help you with the advanced troubleshooting steps.
It will be useful.
-
Security for Microsoft Works 9 (KB2680317) cannot install update
original title: update of security for Microsoft Works 9 (KB2680317)
I tried to update the following, but he missed three days in a row - other updates succeeded:
Update of security for Microsoft Works 9 (KB2680317)Hello
1 are there any changes made recently to the computer?
2. What is the exact error code or the message you get when the update installs?
3. What are the steps that you have already tried to solve this problem?
I suggest you try the following steps:
Method 1.
Step 1: Try to set up your computer in a clean boot state, and check if the same issue occurs
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to set your computer to Normal startup mode.
Step 2.
Download the update and try to install it in the clean boot state manually.
http://www.Microsoft.com/download/en/details.aspx?ID=29346
Method 2: Run the fixit available in the link below to reset windows update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
If you still have questions, then follow
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesHope this helps you.
Maybe you are looking for
-
When I touch the center of the watch of weather circle going up to 10 days instead of temperature or precipitation forecasting. Page 149 of the OS 3 Apple Watch guide said in pressing the Center brings you to the temperature or precipitation. Any fi
-
When the new playlist is more to show what this means that there not enough memory left. My hp desktop computer said I have only 931 GB left.
-
TestStand crashes when you use the feature of LENGTH
So I have a problem when you use the TERM built on stage. the first time I run my sequence everything goes normally... the second time I try to run the sequence it freezes teststand. I have notices that when I run my sequence. I can see on TRACK OR t
-
Original title: updates blocked mail in Windows Mail - security popup does not accept the password Hello - three updates installed security today (KB2691442, 2718523, 2596744). Now Windows mail will no longer accept mail entering into my pop3 account
-
I ordered a set of recovery H8 - 1240T discs. They will work on both my 1240 t?