When I run Firefox using Yahoo as homepage the hard drive running constantly. What is going on?

Similar Questions

• using bitlocker to encrypt the hard drive but the computer now does not recognize the hard drive.

  I use a computer, provided by the company, with the OS Windows 7 Enterprise.

  Is connected a drive 2.5 inch 500G external hard, of WD.

  Using BitLocker to lock the hard drive and with a document of the company. And, later, you unlock the hard drive with the same computer. Status ok. However, I connect the HD to any other device, but no HD were found. Then I plug the HD again with my computer, the BitLock software are not really able to the HD has recognized and sometimes rapidly upward and ask for the key to recovery.

  I tried to use the key (txt file), but still no success.

  I called the hotline of Microsoft and was re-directed I post my question here.

  Appreciated if anyone in this community can help...

  My computer is LEnovo X 201.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/w7itproperf/threads

• Satellite A300-1J1: cannot use F8 to start the HARD drive recovery process

  I just brought a laptop Toshiba Satellite A300-1j1, and at the same time got the upgrade to Vista Ultimate disk at the same time.

  Straight out I went to a sweet upgrade to Ultimate, which failed, and restored in Premuim laptop.

  Stupidly I immediately then a hard install to ultimate who "worked", but of course the drivers to run the laptop has not been installed, I decided to go back to factory settings and try to get Ultimate again once.

  However to use F8 at startup is does not give me the option to restore, and since, I've learned that I should do a set of recovery discs, which I did not.

  Installation, the data is still on the disk 'E', so is anyway I can always use it to make these discs or what should I do?

  Thank you for your help,

  Ian

  > .and since then, I learned that I should do a set of recovery discs, which I did not.
  It's your biggest mistake.
  > Installation, data are still on the 'E' drive, is it so in any way I can still use it to make these discs or what should I do?
  There is nothing you can do to create recovery DVDs. If you want to have the original recovery DVD you must buy it.
  For this audit, please https://backupmedia.toshiba.eu/landing.aspx

  Sorry mate :(

• In Vista, it is possible to find and replace a specific name that I used many files on the hard drive?

  My apologies if someone already asked this (I couldn't find the answer however). I used the name of a person to dozens of (mostly Word) documents that are kept in many different files on my hard drive. I know that I can dig each document separately and then use hidden word and replace the tool to change the name. But this will inevitably take time. Is it possible to do a through - computer find and replace so that I don't have to do this exercise once? Any help gratefully received. Thank you.

  Hello

  I suggest you go through the article and check if it helps.

  Searching in Windows Vista, part 1

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Searching in Windows Vista, part 2

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Searching in Windows Vista, part 3

  http://Windows.Microsoft.com/en-CA/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-CA/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this helps and let us know if you need more assistance.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• I want to recover the data on the hard drive using a laptop as a hard drive.

  Original title: Using a laptop as a hard drive...

  On a MAC, I can plug my laptop into my office with a firewire port to access the hard drive on the laptop without the OS being ran on the laptop.  Windows Vista has such a thing?  If so, how do you go?  The hard drive on my Windows laptop fails and we want to try and recover the data, by hooking it to a desktop as shown above with the MACs.

  Thank you in advance!

  Hello

  "There is no way to access the hard drive when there is no operating system and if the hard drive is connected terribly."

  However, you can remove the hard drive from the laptop and connect it to the office with a case of hard disk that comes with the USB cable.

  Reference:

  Space to grow:
  http://Windows.Microsoft.com/en-us/Windows-Vista/room-to-grow-get-more-space-by-using-external-hard-disk-drives

• Get the hard drive there is no message when you try to load XP

  I am trying to load Windows XP (SP1 and SP2) on a Thinkpad T60P when I do I get a message that the hard drive is not found. When I try and load Linux he finds the hard drive. I started with a BACK disk and run FDISK and he found the hard drive. I don't know what is happening and any help would be appreciated.

  Marc

  I thought about it. I updated the BIOS on the drive and that fixed the issue

• When I close firefox, it always works in the background. When I want to open it again, there is a message that firefox is running and I have to close it. then I close with CTRL + ALT + DEL/taskmanager, according to me, / all this started to happen after u

  When I close firefox, it always works in the background. When I want to open it again, there is a message that firefox is running and I have to close it. then I close with CTRL + ALT + DEL/taskmanager, according to me, /

  This has happened

  Each time Firefox opened

  == After Update/update firefox

  Perhaps, you just need to wait for a while for Firefox download.

  Perhaps, it is an extension/plugin slowing your Firefox.

  When I close Firefox in the evening, it closes slowly and uses 50% of CPU. It unloads after several (30? 60?) seconds.

• When you start firefox, pop-up screen wishes to leave firefox to make changes on the hard disk on the computer. I must say yes, or firefox does not start. Next time.

  Is this a problem of firexfox, or something is wrong with my drive? I don't have this problem when you use IE or Opera, Firefox only. I have to let Firefox to make changes to my hard drive, or it does not start. Once I click on Yes, Firefox works. However, when I close Firefox and try to open it again, the thing is repeated with msg popup to change the hard drive...

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?

  If you use your iMac as a backup to disk using Time Machine look for a folder called Backups.backupdb.

  It's what keeps you upgraded your operating system, you must remove it.

  Copy everything first if you are on a different drive. It would be wise to create a backup of the iMac on another drive also.

  Check system preferences > Time Machine and make sure that the iMac is not selected as the Time Machine drive.

• Out of the blow of sleep when the HARD drive password used on Portege R700

  Hello
  I just got a DLI R700 with Win 7 Pro 64-bit
  I have a very annoying problem because it must be plus 1 minute to accept the password after the resumption of the mode standby. It would be faster out of the hibernation!
  So he wakes up from his sleep in a second, then you can enter the password without any problem but you just can't click on the arrow or press on enter up to what more than one minute. Similarly, it will accept even fingerprints directly at the exit (you get the green check mark) after wake but then expects just over one minute to move in the opening session on the desktop screen.

  Through a process of account, I worked on what was going on...
  Only, it crashes when you have the password on resume from sleep. CV password sleep turn out and he throws back in Office windows in seconds of wake
  This does not happen to resume from hibernation or reboot - scan of fingerprints or password is entered, then goes right into the office in a few seconds
  I started uninstalling software fingerpint, vap, power, toshiba - nothing always security management the same. Then I realized the password HARD drive - which was defined using the security of Toshiba and deleted using the same, has been still enabled in the bios. I have this off and everything works fine. I reinstalled the vap, power management and fingerprint software and everything is always very well, so it was defnitely the HARD drive password.
  Now it's really fake I want to have a RESUME from sleep password and HDD password protection - I have to choose between one or the other, unless I want to wait more than a minute each time he wakes from sleep which is a real pain! So it's clearly a bug in HARD drive password settings, probably in the bios? I have the latest BIOS installed.
  Any ideas on how to get this sort?

  Does anyone else have this problem with be either 32-bit or 64-bit. Or everyone doesn't have this problem, that is to say that they hear HARD drive password AND he wakes with password ok in a few seconds?
  Thank you

  Post edited by: bullerd

  Hey Buddy,

  It's really hard to say something about what I can only say that I can t noticed this problem on my Windows installation.

  By the way: you are using the version Windows from Toshiba or your own installation of Windows?

  Theoretically, it could be a problem to install Windows or disc itself are you able to test another installation of HARD drive or windows that you can make sure it is not a software problem?

• When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  The following article is maybe worth a visit:

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Failure to solve the problem... and if you
  are comfortable editing the registry... it
  may be worth a try to remove the following text
  Registry keys:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmp.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmploc.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\\wmplayer.exe

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Can I synchronize the information to this firefox but didn't save anything on the hard drive?

  Hiya,

  I have a laptop at home that I have used for years. Of course, I've saved loads and loads of the saved passwords. I installed Firefox sync here.
  On my computer at work, I've just matched the sync with my account. Its downloaded all of my info with success and I placed a master password on all my saved password just in case.

  My question is if, for increased security, it is a way in which every time I open Firefox, sync will access my information but then, immediately after the closure of Firefox it deletes just all my data on the hard drive of the PC?
  That is, is there a way to not save any info on is the hard drive of the PC but access my details of the model home?

  Thank you
  William

  No, Firefox Sync does not work in this way. Everything that you synchronize your work yo will stay there unless you delete the daily data.

  IMO, a better solution would be to use Portable Firefox on a USB for your work PC. No data will be loaded on your work PC. everything will be on the USB key instead. When you eject the USB stick your Firefox data will be in your possession, nothing remains on the PC where it has been used.

  http://PortableApps.com/apps/Internet/firefox_portable

  Firefox Sync works between your PC and the 'portable' installed USB version.