When I run Magnify.exe ease of access page at the Center does not open the calculator.

Similar Questions

• When I try to play a CD/DVD it works but it does not open the file, you can not see or hear something

  Cannot get the CD/DVD player to play

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The logo of help and Support does not open when I click on it. It has always worked before today, 7 October. Title: Help and Support

  Logo help and support on the office just stop working. How do you get it working again<>

  Click Start, run and type:

  %windir%\pchealth\helpctr\binaries\helpctr.exe

  Press {ENTER}

  If Help and Support Center does not open, try to reinstall by using the PCHealth.INF method which is explained here.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• Firefox does not open, says he is running when you try to restart, but does not appear

  Can't get Firefox to run visibly. Does not open in safe mode and does not close (said his execution when I try to shut down or restart the computer.) Have uninstalled Firefox and reinstalled 8.0 several times and nothing has changed. Have swept, defragmented, computer etc. and I tried some restorations system until this similar problem once cured with Firefox several months ago.

  Bring up the Windows Task Manager, but look in the "Process" tab for firefox.exe,.
  and shut it down from there, it won't do you any good search in "Applications".
  tab when you do not see the system taskbar.

  Firefox is closed correctly, and for when you just want to close and
  Immediately restart Firefox, see more information

  https://support.Mozilla.com/questions/866027

• Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

  Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
  "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
  I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
  Firefox is not to fall down, so he isn't there an other error message, I can give you.
  The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
  Help please?

  I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• I have LV8.6 and lv9.0. When I run 8.6 I DAQmx, but in LV9.0 I did not. How can I get DAQmx 9.0 also?

  I have LV8.6 and lv9.0. When I run 8.6 I DAQmx, but in LV9.0 I did not. How can I get DAQmx 9.0 also?

  Thank you

  You reinstall the DAQmx drivers after installation of LV 2009?

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I am running Yosemite. on iMac. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall CS4 after failure of hard drive and everything works - photoshop, Indesign - EXCEPT Acrobat 9 Pro. I am running Yosemite on iMac. I reinstalled Acrobat from the disks, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  What is the cause? If yes where can I get.

  I tried to uncheck the boxes, but no difference.

  Is this or an activation problem

  Thank you

  K
  

  Hi Kate,.

  Acrobat 9 is not supported on OS of Yosemite.

  You could face compatibility problems.

  Kind regards
  Rave

• Systematically, does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path or file.» You can not

  Installed FF 16, 17, 18. Does not open in the normal administrator account, or with "Run as Administrator" but will be in SafeMode to W7. Changed the permissions (normal connection had to do in Mode without failure of W7, would not allow (connected as an administrator) can not delete the files from Mozilla in normal connection.) On rare occasions, with a fresh install, I could get it to open once, then not again. Searched the reg any mention of Mozilla or FF and cleaned. Tried FF safe mode, no luck. Check permissions after appropriators and multiplication of the rights of full ownership of all the files of FF, several reboots, no luck. Chrome, IE and SeaMonkey work very well. Using a fairly new installation of W7 Professional 64 bit on a Dell Optiplex 990 i7, 16 GB of ram. Had the same problem with another user on the same box. No problem on other computers without other problems in program.

  Finally have it running. Seems that the enterprise version of McAfee is blocking the installation of the program. McAfee uninstalled, reinstalled Firefox, installed McAfee and now, it's good to go.

• access to the content of the files downloaded from the internet: when I download PDFs from the internet to my documents, they get there but does not open

  When I download PDFs from the internet to my documents, they get there but does not open.

  Download Adobe Reader; Uncheck the box first the Google toolbar:

  http://get.Adobe.com/reader/

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Creating .exe cloud does not open when you download.

  As the title says, I can download the file but it does not open. In addition, when you attempt to open in Internet Explorer, it says that the file is not found or it can be moved.

  Any help?

  Andrew

  We can call you and help you resolve it.

  Otherwise, you can create a new user account and verify that.

  Create a user account - Windows help

  Thank you

  Varun

• I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use an access point

  I am trying to download a trial version of adobe captivate, I downloaded net session akamai interface, but it does not open when I click on it. I tried to download the file directly, and there is no answer. I unlocked the ads. I use a mac apple OS10.6.8 and the browser chrome. can anyone help please?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• "lcwipx.exe of shortcut that you refer to is not available" and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

  Hi Pascal,.

  I see that you get an error trying to access files on an external drive. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the external drive?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5A external drive earlier good work?

  6. have you updated to Service Pack 2 installed?

  Method 1.

  Connect a different drive to the computer and check.

  Method 2.

  Plug this external drive on another computer and check the status.

  Method 3.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Media Center does not close when you use my administrator account

  When I connect account administrator w / my, media library opens on its own. I then close media library but whenever I try to open another program the media center opens. I again close media center, try to open another program and units media center opens instead. It seems to have an impact on the account administrator only. I don't seem to have a problem when logged in user accounts. If anyone has any suggestions, I would be very grateful for your contribution. Aloha.

  Take a look: -.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  S.Sengupta Media Center MVP

• My Windows Media Player does not open upward when you click it in the list of available programs, nor will any media over the internet using Windows Media does not work

  My Windows Media does not open upward, when you click on Window Media Player in the list of available programs nor play any internet media using the Media window. I have the 110.6002.18311 version. Any help to fix this problem will be appreciated.

  Hello

  You can try to re register the dll files for windows media player and if it helps fix your problem. To do this, please follow the steps below:
  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. At the command prompt, type the following commands and press ENTER after each command:
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wmp.dll