When I try to check the updates of windows I get error a 8024, 000.

Similar Questions

• When I try to check the updates of windows on windows 8 I receive error code 'WindowsUpdate_8024a000 '.

  * Original title: updates

  When I try to check the updates of windows on windows 8 I get this code...

  • WindowsUpdate_8024a000

  • Thank you in advance for your help!

  • Rick

  Please run the Windows Update Troubleshooter:
  Download it from this link.

  Please provide details of any problem it reports as not fixed.

• When I try to download the update of windows I get an error code every time: 802440F.

  When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?

  @ Evanston only!...

  You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).

  Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck & achieve before Thanksgiving 2010!

• When I try to install the updates to windows, I get the 8007371C error code

  I can't find any information on this error code. What is the error & the solution to the error? Help, please.

  Hi nymom,

  1. When was the last time you were able to install the updates on the computer?

  2. did you of recent changes on the computer?

  3 update you are trying to install?

  4. do you have security software installed on the computer?

  Method 1

  I suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  View update history to know what update is not to proceed with the installation and post back with the details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

• When I try to run the update in widows I get the error number: 0x8024400A

  When I try to run the update in widows I get the error number: 0x8024400A. I also tried to restart the automatic update service and BITS service with no luck. Any ideas? I am running Windows XP SP2 on a Dell Latitude. I lost a hard drive and just reinstalled today of a disc from Dell.

  Thank you

  Adam

  http://support.Microsoft.com/kb/836941

  Read the above article, you can use Fixit, but I suggest fix you it yourself by following the steps in the resolution.

• When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution.

  When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution

  Hello

  This should help you:

  "Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall.

  http://support.Microsoft.com/kb/968002

  See you soon.

• When I try to start the time service Windows, I get a message:

  When I try to start the time service Windows, I get a message:

  ------------------------------------------------------------------------------------------------------------

  Windows could not start the time Service Windows on the Local computer.

  Error 2: The system cannot find the specified file

  any idea please?

  The question is similar but not identical.
  You can have a look. See if the answer in this thread will help:
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/6bbea43f-5575-4E78-9b52-ac766632bfc2

  Answered by: Martin - Support Engineer
  Date: June 20, 2009. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• try to download the update of windows... error number: 0x8024400a...

  try to download the update of windows... all I get is "the website has encountered a problem and cannot display the page you are trying to view" error number: 0x8024400a the... no idea on how to solve this problem?

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

  You must be at the level of Service Pack 3 before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error Code 8E5E03FE when you try to install the update for Windows 7 for x 64-based systems (KB971033)

  Installation stops / fails 25% full.

  Feel free to hide this optional update.

  HOW to hide an update or restore a hidden update
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try to install the update of Quickbooks. Getting error 1321 "insuffifcient privleges" how to fix it?

  Using Quickbooks Pro Plus 2011.

  This update came when I signed to QB with the installation option. Option agreed, but has Error1321 message at about 70-80% installation point.

  How to allow installation?

  The following support Quickbooks gives reasons and solutions for error 1321: http://support.quickbooks.intuit.com/support/Articles/SLN40038

• When you try to run the Network Setup Wizard, I get error loading rundll hnetwiz.dill.

  Trying to set up home networking on my windows xp, I get this message ("error loading hnetwiz.dll specified module is not found") I'm sorry I'm dumb as a box of rocks...

  Hello pat,

  You're trying to network the two versions of Windows by following the instructions in this article?
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Error 80071 has 30 when you try to install the updates.

  What does it mean error code a 80071, 30 when you try to install the updates

  Hello

  1. are you able to install the updates as soon as possible?

  2 has there been recent changes made on the computer before the show?

  I suggest you to please follow the provided steps and update us with the results.

   

  Method 1: Perform the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 2: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  Method 3: How to reset Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  Method 4: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  You can also check the updates failed.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  I hope that helps!

• Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

  Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

  Hello

  I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also say that you reset Windows update components and check if this may help.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Error 80070652 occur when you try to install the update for microsoft works 9 and 2007 microsoft office suite Service Pack 2 - why?

  CONTINUE TO RECEIVE AN ERROR 80070652 CODE WHEN I TRY TO INSTALL THE UPDATES FROM THE WINDOW FOR MICROSOFT

  WORKS 9 AND 2007 MICROSOFT OFFICE SUITE SERVICE PACK 2 - WHY?

  Hi SonjaThibodeaux,

  ·         You are able to install all other updates without any problems?

  ·         Remember to make changes to the computer, after which the issue started?

  ·         What are the KB numbers associated with the updates?

  Try to reset Windows updated components and check if it helps:

  How to reset the Windows Update components?

  I hope this helps.