When I try to go full screen while watching a video, I get a white screen
While watching a video (IE, the youtube video), I press the full screen in the right corner, but all I get is a white screen.
Hi RalphDuran,
· You use Internet Explorer?
· If Yes, then which version of IE are you using?
· How long have you been faced with this problem?
· Did you do changes on the computer before the show?
· What is the number and the model of the computer?
· The problem only occurs with YouTube or any other video as well?
Try the methods and check the results below:
Method 1: Try changing the screen resolution something like 1024 x 768, then check if the problem persists. You can check the link for the steps below:
To change your screen resolution:
Method 2: Install the drivers of the last update of the device screen and check the result.
a. click on Start
b. click run, in the Open box type devmgmt.msc
c. find display driver
d. double-click the type of device
e. right click on the device driver specific you want to update or change.
f. click put updated driver to open the Hardware Update Wizard. Follow the instructions in the wizard
Method 2: You can also check if uninstall then reinstall adobe flash player allows.
For more information, please see the article.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
Hope this information helps.
Tags: Windows
Similar Questions
-
While watching a video and I click on full screen my screen turns white - I can still hear the program, but no image... Please make suggestions in terms that even a 3 years could understand - this is my level of ability of the computer... Thank you.. .JB
This has happened
Each time Firefox opened
== looking extreme Insider glennbeck about 10 months ago
-
I can't watch any of the programs in U tube on change too many full-screen. yesterday everything was ok. I tried a restore of the system without result.
Hello
· Is the behavior even with Internet explore?
If Yes, then you can follow the procedure:
a. Click Start, click Run, type desk.cpl and then click OK.
b. click on the settings tab and then click Advanced.
c. on the performance tab or on the Troubleshooting tab, move the hardware acceleration all the way to the right (Full position).
d. click OK and then click Close.
e. If you are prompted to restart your computer, click Yes.
If the problem is only with Firefox, you can post your request in the support forum of Mozilla for assistance: http://support.mozilla.com/en-US/questions
-
When I try to change user my computer freezes and I just get a white screen
white screen
Hi Pete Spong
Thank you for using the Microsoft Answers Forums!
I would like to ask you a few questions to help focus in the right direction:
Since when you receive this error message? Have you made changes to your system?
Try the following steps:
Step 1:
Put the computer in a clean boot (namely if any third-party software hinders the process)
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
(Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)
Step 2:
Install this update if it is not already installed on your computer and check.
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Why can't I enlarge my screen while watching a video
Why can't I enlarge my screen while watching a video?
Hello
· What version of the operating system is installed on the computer?
· Which application do you use to watch videos?
· When the issue started?
· What happens when you try to apply full-screen?
If you use Windows Media Player, then press Alt + Enter to watch videos using the full screen.
-
Display turns off when trying to play in full screen mode
Original title: games will drain when I enter the mode full screen
Hello
When I play a game using the full screen, the screen is empty.
It is not a question of compatibility-more early, I played the game.
I even hear the audio. But when I Alt - Tab on the desktop, I get to see my office.
But back to game - it's empty.It's my PC config:
OS: Windows 7 Ultimate SP1
Processor: 3.1 GHz Intel core i3 - 2100
RAM: 2 GB DDR3 DIMMSThe game is a play has need for speed: Hot pursuit.
If you suggest me to try another game, I did it with:
Need for speed The run
Need for speed Porsche Unleashed
TrackMania Nations Forever
Nitronic Rush.All have the same problem.
Thanking you,
Hello
I got the fix.
Right-click on desktop and select graphics properties,
Select the default rest,
Apply and that's all
It's working now.Thank you, and you guys sorry for disturbing
-
When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
Cure please!Do you find it with other browsers?
If not, then try asking using Firefox for a.
That you get with other sites with Firefox?
-
Is it possible to return to the map view when you are using the full screen and more it Launcher button? This will bring this button quick exit!
Hello and thank you for using the HP webOS Help Forums!
The Center button is not required to enter the map view. In any position (landscape or portrait) you can slide your finger from the bottom to the top of the page, but just make sure that you start in the black area around the screen. It is a subtle and quick movement and may require some getting used to.
I hope this helps
-
When I try to record the screen, an error pops up
Help, please!
I get this error when you try to save the screen:
"Capture is denied because the high-density display has been detected. "Please Set DpiAwareness = 1 in AdobeCaptivate.ini and restart the application.
Get help to resolve this issue would be greatly appreciated!
Thank you
Hello
Have you tried to take the steps that are mentioned? Basically, you will need to find the file named AdobeCaptivate.ini and try to change to add the referenced statement.
Cheers, Rick
-
The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.
Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.
Acrobat Connect Pro data sheet
I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.
It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.
-
When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.
original title: RECEIVES the MESSAGE of ERROR WHILE SENDING AND RECEIVING PHOTOS
Hello Jane,.
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
original title: log question.
When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out. How can I fix?
Hi KERRYYX,
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You have security software installed on the computer?
- What is the full error message that you receive?
- Are you able to restart and shut down the computer?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
You cannot log off, restart or shut down your Windows XP-based computer
-
Original title: out of memory
I opened a document, selected, copied. When I try to paste it into a new blank document I get a message indicating low memory and I can't makeit work. What should I do?
Hmmm, Word document? What is this document?
As a side note, you might just go into Windows Explorer and make a copy of the entire file, rename and then edit according to your needs.
-
When I try to open a PDF in a Web site, I get a runtime error and the site is stopped.
Hello
When I try to open a PDF in a Web site, I get a runtime error and the site is stopped. How can I fix this problem? I am running Windows XP Home Edition.
original title: Run time error
Hello.
I guess you are using Acrobat Reader to view the PDF files?
You can try to download the latest version of Acrobat Reader here:
-
Unable to connect laptop (wireless) broadband
Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.Remove any preconfigured network settings wireless then rescan to make new connection settings
Hope this will do the needfull
Please let us know
Maybe you are looking for
-
I am running Windows XP. After updating to Firefox6.02 a second tab was there after my 'Google' default tag. The second tab contains the words "New Tab" on this issue, and when you click the 'X' button in the tab, it does not close. When you go to fo
-
Hello! The other day, so I installed this app called ManyCams which he had to do something with your camera when you went on Skype, FaceTime or omegle and apps like that. So I deleted the application because I didn t like her, but today I tried to vi
-
I use Teststand 3.0, and I would like to have the comment field of each step of my movie file teststand appearing in my html report file. I guess I'll have to change the model of teststand ReportGen_html, but I would like to have your opinion to do s
-
App.Kind difference between LV 2012 and 2013
Hello I have a LabVIEW program that I built in 2012, but recently updated for 2013. The App.Kind property node sends environmental LV to a Business Structure that determines whether it is appropriate to stop the program (development environment) or c
-
Hello I wan to learn jpeg CONCATENATE files. I wrote a code on this subject, but my solution is not good solution for concatenating files jpeg. My code can only show my jpeg files step by step. First of all, copy the following code may show first jpe