When I try to publish online, I get error # 1

Similar Questions

• When I try to install SP1 I get error "an internal error has occurred in the installation of the service pack".

  Original title: Windows Vista SP1

  Hello

  I brought an old computer home from work, and it is in Vista, but he needs service packs 1 and 2.

  When I try to install SP1 I get the following message: -.

  An internal error occurred during the installation of the service pack

  Error 0x800B0100

  http://go.Microsoft.com/fwlink/LinkId=101139

  Can anyone help?

  Thank you

  Bob

  Hello

  You don't say how you try to install SP1

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  ______________________________________________

  And please read this too.

  http://www.Vistax64.com/Vista-General/187922-Vista-SP1-0x800b0100-error-fix.html

  See you soon.

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.

• When I try to open Word 2010, get error "this file has no program associated with it for performing this action. Create an association in the control panel to set Associations "."

  When I try to open Microsoft Word 2010, I get the error: the file, try opening is c:\program files (x 86) Microsoft Office\Office14\WINWORD. EXE.

  When I check my file associations, there is no winword.exe to associate it with Microsoft Word.

  Any suggestions?

  Thank you

  Please see the thread similar to the following for a solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/this-file-does-not-have-a-program-associated-with/1dd8f34f-67aa-43CE-af0c-50387c5431a6

• When I try to install itunes I get error "windows install is not enabled.

  When I try to download and install itunes on my PC I get a notice that says that "windows install is not enabled...". How can I find the installer of windows and turn on? Thanx

  When you try to download itunes, download is stapped with a notice saying: "windows install is not marked on" how to find the windows on my PV Installer and turn it on?

  Here's a solution: go to start / Control Panel / Administrative Tools / Services and select Windows Installer.  Double-click it to open it.  Make sure that it is set to automatic (change it if it's not).  If it is running, stop it and then restart it again.  If it is stopped, start it just.

  If this does not work, try to run the Windows Installer Cleanup of http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html utility and see if that helps.  You may need to restart the service after you have done this, and you may also have to restart.

  When you retry the installation, right-click on the executable installation file and click Run as administrator.  It is sometimes useful.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I Photofunstudio 8.0SE but when I try to run it, I get error "cannot find MSVCR71.dll.

  I loaded Photofunstudio 8.0SE leave a DVD. When I try to run the program I get the error message "Cannot find MSVCR71.dll" I ran SFC but always this error message. Should I try downloading the file from the internet, if so where? Thank you Al7 I forgot to say that I am under windows7 64 bit

  Hi Al 7.

  There are several different ways that msvcr71.dll errors may appear on your computer. Here are some of the most common ways that you can see msvcr71.dll errors:

  • "Msvcr71.dll not found."
  • "This application has failed to start because msvcr71.dll was not found. Reinstalling the application may fix this problem. »
  • "Cannot find [PATH] \msvcr71.dll.
  • "The msvcr71.dll file is missing."
  • "Failed to start [APPLICATION]. A required component is missing: msvcr71.dll. Please reinstall [APPLICATION]. »

  Msvcr71.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the msvcr71.dll error is a key piece of information that will be useful while solving the problem.

  Cause of Msvcr71.dll errors
  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file.

  In some cases, the msvcr71.dll errors might indicate a problem of registry, a virus or malware issue or even a hardware failure.

  How to fix Msvcr71.dll errors
  Important: do not download msvcr71.dll from a website "Download DLL. There are many reasons why a DLL file download is a bad idea. If you need a copy of msvcr71.dll, it is better to get it from its original, legitimate source.

  Note: Start Windows Mode without failure to complete one of the following steps if you are unable to access Windows normally due to msvcr71.dll error.

  1. Restore the trash msvcr71.dll. The simplest possible cause of a "missing" msvcr71.dll file, it's that you deleted by mistake.

     If you think you've accidentally deleted msvcr71.dll but you already emptied the Recycle Bin, you can collect msvcr71.dll with a free file recovery program.

     Important: Recovering a deleted copy of msvcr71.dll a file recovery program is a smart idea if you are convinced that you have deleted the file yourself, and that it was working properly until you did.

  2. Run a scan for virus/malware from your whole system. Msvcr71.dll errors may be related to a virus or other infection of malicious software on your computer that has damaged the DLL file. It is even possible that the msvcr71.dll error you see is related to a hostile program who is posing as the file.

  3. Use the system restore to undo recent system changes. If you suspect that the msvcr71.dll error was caused by a change to an important file or a configuration, restore the system could solve the problem.

  4. Reinstall the program that uses the msvcr71.dll file. If the DLLS msvcr71.dll error occurs when you use a particular program, reinstall the program should replace the file.

     Important: Do your best to do this next step. Reinstall the program that provides the msvcr71.dll file, if possible, is a likely solution to this DLL error.

  5. To update the drivers for hardware devices that might be linked to msvcr71.dll. If, for example, you receive an error "the msvcr71.dll file is missing" when you play a video game in 3D, try to update the drivers for your video card.

  Note: The msvcr71.dll file may or may not be related to video cards - it was just an example. The key here is very attentive to the context of the error and troubleshoot accordingly.

• Roll back a driver to a previously installed version if msvcr71.dll errors started after the update of a particular hardware driver.

• Run the sfc/scannow command System File Checker to replace the copy of msvcr71.dll missing or damaged file. This DLL file is provided my Microsoft, the System File Checker tool should restore it.

• Install the available Windows updates. Several service packs and other patches replace or update some of the hundreds of distributed Microsoft DLL files on your computer. The msvcr71.dll file could be included in either of these updates.

• Test your memory and test it on your hard drive. I left the majority of troubleshooting equipment at the final stage, but memory and hard drive of your computer are easy to test components are more probable that could cause msvcr71.dll errors because they do not.

  If one of your tests of hardware failure, replace the memory or replace the drive hard as soon as possible.

• Repair your Windows installation. If the msvcr71.dll file individual troubleshooting tips above fails, perform a restart or a repair installation should restore all Windows DLL files to their working versions.

• Use a free registry cleaner to fix msvcr71.dll issues in the registry. A free registry cleaner program may be able to help by deleting some registry entries disabled msvcr71.dll that might cause the DLL error.

  Important: Rarely, I recommend the use of registry cleaners. I've included the option here as an attempt to 'last resort' before the destructive step to come up next.

• Perform a new installation of Windows. A clean install of Windows will erase the entire hard drive and install a fresh copy of Windows. If none of the above steps fix the msvcr71.dll error, this should be your next course of action.

  Important: All the information on your hard drive will be erased during a clean installation. Make sure that you have done the best possible attempt to correct the msvcr71.dll error using a troubleshooting step before this one.

• Troubleshooting a hardware problem if any msvcr71.dll error persists. After a clean install of Windows, your DLL problem may be hardware related.

Applies to
The msvcr71.dll error message could apply to any program or system that could use the file on any of the operating systems of Microsoft Windows 8, Windows 7, Windows Vista, Windows XP, and Windows 2000.
Msvcr71.dll questions?
That a community of computer supported the help of enthusiasts! View the details of your question msvcr71.dll in the Microsoft Community. Don't forget to let us know the exact msvcr71.dll error message you see, and what measures, if any, you already have to solve the problem.

• After reinstalling Vista, when you try to do Windows updates get error 80073712

  Initial problem was unable to update windows. Reinstall Windows Vista. Now meet 80073712 error.

  Is there a reason why you don't have not advised SP level you use, etc.?

  http://support.Microsoft.com/kb/555375 >

  There is a tool that will try to fix the inconsistent to the component store but, State if the system has malware resident, then it may not work properly.
  
  A general solution, *IF* is no malware problem, would be to run the system update tool.

  (When was the last time you checked your system for malicious programs?)

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update error 80073712 error code.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool>

  Read this:

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".

  http://support.Microsoft.com/kb/957310>

  NOTE: Before going through the steps provided for in article KB957310, I suggest you you to reset windows component update and check if you can install the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058>

  UTC/GMT is 12:26 Tuesday, June 12, 2012

• When you try to install CC I get error 201?

  I try to install on PC CC a customer and they have a problem trying to download, they get error 201 he internet connection is stable and it does not appear that Adobe are having problems of server help on that would be great thank you

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

  201 - https://forums.adobe.com/thread/1636199

  - https://forums.adobe.com/thread/1863066

• When you try to uninstall PCMightyMax I get error and it won't uninstall.

  After I downloaded pcmightymax I decided that I didn't want it so I tried to remove the program, but I have still two pop-up windows of the program telling me that I get errors how to remove these pop ups

  original title: persistent pop ups

  Anna

  See the answers in the next possible solutions thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-remove-PC-MightyMax-icon/4c078fb6-ACBB-4438-942e-681a4f7b02d4

• When you try to add a printer, get error Printer Spooler service is not running

  I lost my printer and when I click Add printer, I get the message of this operation could not be completed. The print spooler service is not running. Then, the computer detects the new hardware and says the RPC server is unavailable can help?

  Check the status of 'Print spooler' & RPC (remote Procedure Call) services in the services window. You can check the link below to change the status of the services.

  http://TechNet.Microsoft.com/en-us/library/cc736564%28WS.10%29.aspx

  After the services start, delete all previous printers. Uninstall the drivers and then try to reinstall the printer again.

  If the problem still persists to the print spooler, you can import the registry across the entry below machine & merge the machine to issue:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  Also check out the link for your RPC unavailable problem:
  http://support.Microsoft.com/kb/242079

  Now, try to restart the print spooler new service & try to install the printer.

  Note: instead of copying files from another machine you can also run the SFC/scannow.

• Photos are get recorded in the Games folder and when I try to access it, I get error "file name or extension is long."

  Original title: filename or extensions East of long

  "" I don't know how but all my pictures are gone to my save game file and now I have to click a whole bunch of times and all of these files named photos come again and again, and then finally my image with the names under the icon folder put when I click to see the image I get the error message the ' filename or extension is long "

  Hello
  I suggest that you do the following.
  Step 1:
  Try to rename the file and check.
  Step 2:
   

  Move the current location photo files and check.

  Step 3:

   

  Alternatively, you can try System Restore to a point that it functioned very well.

  Aziz Nadeem - Microsoft Support

   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• When you try to update windows, I get error Msg. Web site has encountered a problem and cannot display the page you are trying to view. Error # OXC800042D do - what do I do now?

  I am running Windows XP Pro 32 bit.  I get a planned update early in the morning, but after reading an article in update of virus, I thought I would check out the updates, which I didn't.  Above, is what happened when I tried to check it ME late.  Help & information will be appreciated & is all I really need to worry?

  Hello

  . Have you done any recently changed on the computer before this problem?

  You can see the steps listed in the article below and check if you are able to run the Windows updates successfully.

   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update:

  http://support.Microsoft.com/kb/836941

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  I hope this helps.

• When I try to open Photoshop, I get error 0xc000007b.

  Hi, I was recently UN-installing a program and I have chosen, at the last second I hit the uninstall I accidentally selected and unintalled a Visual C++ (Im guessing 2005) program on my Lenovo laptop. I don't know what 2 I uninstalled, I had 4 and now I have 2 and they are all two 2005 so I'm not sure what the other two I uninstalled with VC ++. But after I did that I get an error code when I turn on my laptop that says it's a .dll (msvcp100.dll) error and when I open Photoshop I also get a 0xc000007b error code.

  Someone please help me solve this problem?

  -Mario Chiesa

  original title: Error Code on start up and loading photoshop

  Mario

  Visual C++ Redistributable 2005

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=3387

  Visual C++ Redistributable 2008

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=29

  Visual C++ Redistributable 2010

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  Install these to see if the problem is resolved

• When you try to download Microsoft Silverlight get error "this action requires a rise."

  I am trying to download Microsoft silverlight to my computer which runs on Windows Vista.  I get the message that "this action requires a rise."  I am the only user and administrator.  I don't know how to solve this problem.  Help, please.

  Download Microsoft Silverlight installer from here (save it on your desktop.)

  Right click on the saved file and choose "Run as Administrator".

  Follow the prompts to install.

• When you try to import photos I get error "Adobe Photoshop (lightroom) does not '-problem since September 4, 2015

  I could import and edit photos on 04/09/2015 but now they don't matter and I get an error message.  Tried my bought lightroom 5 and even I tried to switch to lightroom trial cc but no luck.  Any help appreciated, TYIA.

  I always suggest you rename or remove the file from Lightroom preferences.

  You are not able to import the external resource Image, have you tried to import the image from the desktop.

  Thank you.