When I try to run programs, you'll see the 'Open with' window with IE the only choice.
It happened with my Norton Security. When I tried to open the window popped up. I chatted with their helpdesk and when they had to start a program, so they can open a session, the appeared window. They even try to determined the problem myself. When I tried to run the program the sent me, pops up the window.
I'd be inclined to make the Norton Support to fix it for you!
After all, it is their program.
You could do a system restore, BUT it will probably cause Norton to play up!
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Restore the .exe Windows Vista file association, after badly with another application
Read the info on the link above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And to set file Associations:
http://articles.TechRepublic.com.com/5100-10878_11-6172036.html
How do I... Change file extension associations in Windows Vista?
See you soon. Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
I recently had to create a new disk and install the full version of Windows 10. I can get all my apps Cloud creative install, but first Pro Crash when I try to run it. I get the following error "the application could not start correctly (0xc0000142). Click OK to close the application. I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error. Has anyone seen this one? My setup is below:
Hi PK Gary,.
I recently had to create a new disk and install the full version of Windows 10. I can get all my apps Cloud creative install, but first Pro Crash when I try to run it. I get the following error "the application could not start correctly (0xc0000142).
Update for Premiere Pro CC 2015 (9.2) for a fix.
Thank you
Kevin -
Error: 16 when I try to run after you install Photoshop CS6
Hello. I had a problem in my MacBook Pro (something to do with permissions) and had to erase the entire hard drive and reinstalling everything Time machine back Ups. Everything seems to work again, except Photoshop CS6, which I had bought before the problem. When you try to run it, I got a message asking me to uninstall and reinstall. Yes, I did. The installation program completed the bar of progress but then "unexpectedly resigned. The software seems to have been installed, but when I tried to run it, I got error: 16 and has been invited to uninstall and reinstall again. I did, but it's the same thing. Can anyone help?
This article can help: -.
http://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html
-
I tried the update for my hp photosmart728. I tried to reinstall the printer drivers. I can use the printer without a computer. Mr. fix I'm erros for many things. Help!
Hello
1. what exactly happens when you try to print?
2. What is the exact error message do you get?
3. what difficulty you are referring to?
4. don't you make changes to the computer until the problem occurred?
I suggest you try the steps mentioned below and check if it helps.
Method 1: Solve printer problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Method 2: Printer in Windows problems.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Hope this information is useful.
-
Bluetooth keyboard put in place the display and connected mines and allow me to do anything apart from closing down
SystemPreferences-> Bluetooth: Remove the paired keyboard, if necessary, turn off Bluetooth.
-
I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a message of immediate windows Windows "Quicken launcher has stopped working" will try to resolve the problem then
Hello Richard Popp,.
I'm not an expert on Quicken so I do not know what help I will be.
You could look at this post on the Quicken Forum and see if this information helps you.
https://qlc.Intuit.com/post/show_post_full_view/cppSsgKbWr3PYHacfArQA81 Quicken uninstall using the Windows Control Panel
2. run qcleanui.exe and clean all versions.
3. restart your PC
4 Quicken resettlement to a new distinct and NOT in the Program Files folder in the folder where your Quicken data resides and install as administrator (if on Vista).
5 update Quicken at the last updated R6.
See if that helps. Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
* Original title: DirectX and space engineers
Hello, I am running Windows 7 Home Premium 64 Bit and my diagnosis tool DirectX says that my current version is DirectX 11, but when I try to run space engineers and use a world with planets, he tells me that I need to run DirectX 11. When I go to my DirectX folder, it says that I am running DirectX 9.0, I'm very confused and internet only helped me at all up to this point. All suggestions/help and help will be greatly appreciated.
Well, is it not a strange ball game? Minimum = DX9 and DX11 for planets.
Looks like no shore leave for you then... :)
"NOTE: the minimum requirements are enough to run the game, but without the global functions,
which requires DirectX 11. »
"When I go into my file DirectX it tells me that I'm running DirectX 9.0"
Direct X folder?
Win7 has DX9, 10 & 11. However, older graphics cards are not be able to use DX11 (or DX10 if old enough).
It comes to graphics cards which are older than AMD HD 5000 (version ' 09) and Nvidia GTX 400 (exit 10) series.
EDIT: This also applies to the older map HD4000 Intel integrated graphics (Inc., HD3000, and all the "GMA" graphic integrated).
----------------------
-Here is a list of the .dll Direct X files you when files are updated.
There are more files DX (Xinput and audio), but these are most of the graphs related to Direct X .dllGo to Windows / System 32 folder (and SysWOW64 if you have 64-bit).
-They are in alphabetical order and begin by d3dx9_24.dll > 43. Then d3dx10 - 33 43 >
. & Finally d3dx11 - 42 43 >.
It should also be--d3d9, d3d10 and d3d11. These come before the D3Dcompilers - 33 > 43.If all of these files is missing update Direct X using the DX Web Installer.
Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center
Sometimes, a file is corrupt (mainly by games always reinstall DX unnecessarily). I have this case
DX must be reinstalled using the full DirectX redist (June 2010) -
Download details - Microsoft Download Center - DirectX Redist (June 2010)
.
-
I have Vista Premium when I try to run Quicken, I get an immediate message of windows Windows "Quicken launcher has stopped working" will try to solve the problem then... Quicken worked very well. I tried to reinstall with no luck still improved to 10 still have the same problem... I am the administrator, there must be vista? but I'm out of ideas
http://Quicken.Intuit.com/support/ MS - MVP - Elephant Boy computers - don't panic!
-
I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."
Please can you help me?
Original title: AdvrCntr6.dll
Hello.
There is a guide for fixing here:
http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm
-
I have CS6 Production Premium and speed category, I installed and when I try to run the program I need to sign up for the cloud. I just want to use my version can help you or seated, me?
I have stick thread regarding the CS6 and Cloud Creative Re: What's up with Adobe Application Manager CS6?
and another, if you are confused enough, perhaps another angle my old CS6 now asking me to connect to the cloud
and maybe he has your response a bit clearer how we prevent cloud creative resume my perpetual license CS6?
-
Original title: [ProgramName] .exe Entry Point not found
I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!
Hello
1. did you of recent changes on the computer?
Method 1:
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.Method 2:
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
Adobe Bridge CS6 on my Toshiba 32 bit?, I don't know why, but when I try to run this program, then the DEP blocks Adobe Bridge, what's the problem?
This means that the program will use the incorrect memory or he is attacked by hackers or virus. See if there is an updated version.
To allow the program to function in any case type DEP in the Start menu - Help and Support.
Help
Change Data Execution Prevention settings
Data Execution Prevention (DEP) is a security feature that protects against viruses and other security threats by analyzing your programs to make sure that they use the system safely memory.
If you choose to protect all programs, you can always turn off DEP for individual programs. If you think that a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.
Click to open the system.
Click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Under performance, click settings.
Click the Data Execution Prevention tab, and then click turn on DEP for all programs and services except those I select.
To turn off DEP for an individual programSelect the check box next to the program that you want to turn off DEP for and then click OK.
If the program is not in the list, click Add. Navigate to the Program files, search for the executable file of the program (it will have the .exe extension) and then click Open.
To turn on DEP for an individual programClear the check box next to the program that you want to turn on DEP for and then click OK.
-
Hello
I am setting up a new laptop and downloaded Acrobat Pro XI for Windows computer. Download and install seemed to go fine, but when I try to run the program, it is coming in a few other locales (not French_FR). What should I do to configure the program for the locale in the United States?
(running Setup 3 times (to fix, modify, uninstall/reinstall), but so far nothing has worked.) Even after uninstalling/reinstalling (where I deselected the local Korean), the program still continues to flow upwards in an alternate reality!
Help, please!
Thank you
-fastkeysx
Hi Vicki,
Have you tried toggling this setting under Edit > Preferences:
Kind regards
Rave
-
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
I am re - install XP on an SSD. The installation went well, but when I try to run windows update, I get the following error message: "the site has encountered a problem and cannot display the page you are trying to view. I reformatted the drive and re-installed windows many links - no luck, I get the same error message. Old disk HARD charge with the SME XP install updates to drive very well. Help please!
See if the article sheds some light for this problem: http://support.microsoft.com/kb/836941
Maybe you are looking for
-
Memory problems (/ questions/967643)
FIrefox uses 1 gig RAM + with almost nothing running.
-
Hello my problem occurred as a result of the creation or modification of partitions to install ubuntu (for reasons of college) however I stupidly didn't check my disk was dynamic or basic and unfortunately it was dynamic, if after failing to install
-
How to replace the output buffer?
I'm a generation of finite signals 2 lanes on a0 and a1. I want to change one or the other of the waveforms at various times during the program and sometimes I have to be able to overwrite the contents of the buffer with a new set of data until the g
-
After you disable the speakers in the Sound Control panel, how to re-enable?
On Vista 64-bit with latest updates, in a hurry to catch a signal continuously with the sound only through headphones, I turned off one of the entrances in the sound control panel, which was the laptop speakers. This was done by selecting the elemen
-
every time you start, vista says that the system previously close unexpectedly, she doesn't. We go to the verification of the system looking for errors that takes a lot of time.