Memory problems (/ questions/967643)

Similar Questions

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Microsoft Photo Viewer memory problem / unable to print images... (2 questions)

  The other day I tried to print a photo (.jpg file) color - so I deactivated the "Print in grayscale" checkbox in the properties of the printer (just like always).

  But after clicking on the OK/Print button in the Print Wizard Photo, 4 the same error windows pop up.

  Translated from Danish:

  "An error occurred during printing.
  "The images cannot be printed due to the following error:

  ... But there is no description of error?

  Now 4 error popups every time I try to print an image (.jpg or .png) - but NOT when you print documents containing images (.pdf and .odf) that prints very well.
  .txt files print as well...

  Standard Windows 7 Photo Viewer no longer works. He tells me that I have not enough memory on my system to display the selected image (.jpg-file 3 MB)...

  I'm on a system Windows 7 Home Premium with 4 GB of RAM installed - I'm only using about 1 GB of them at the moment - is NOT a memory problem.
  The CPU usage is also about 1%...

  Any thoughts?

  Kind regards

  I hate this chime late trying to solve this problem, but I had the exactly the same problem (per month) and finally resolved.

  What has not worked:

  • Reinstall Windows 7 as an upgrade on the spot.
  • Upgrade to Windows 8 (improved the situation, but did not fix)

  What makes:

  • Create a new user account, it set until I transferred the old user account settings.
  • Set the color management settings.

  Before you reinstall, I suggest to create a new user account and try printing once logged into the new account. If the photo printing Wizard works when logged in with a user account, the problem is specific to the settings for the user account with the problem.

  To check the color management settings try this:

  • Click Start
  • Color in the search box type
  • Click on color management in the results of the research
  • Click the Advanced tab
  • Make a note of any settings that do not start with the system default
  • Change all settings that are not listed as default from system to system default
  • Close the color management dialog box and try again the Print Wizard

  In my case it was a colour profile Adobe corrupted causing the problem.

• Equium L20-197 - memory problem

  I have memory problem with pc-world of computing L20 and currys sell the L20 with suite spec 256 MB of main memory and 128 MB of video memory (up to 128 no) when this is not the first case of all memory is shared and there are 64 MB main memory and when you try memory video in bios , it won't let you upward in rising to 128 unless you install another memory stick no matter who else noticed this problem? I know that the previous model of the L10 with intel video chipset was supposed to allocate depends of the video memory load, but there is no mention of this on the ati chipset model. all the ideas!

  Hello

  AFAIK usually specification is 32 to 128 MB shared memory. Probably, it should be possible to put it in the BIOS. On some units with ATI graphics card, it is possible to put it under properties of ATI (display properties > advanced). There is an option to change the value of the AMU which will change the RAM allocation shared to the graphics card. It's usually adjustable 16 MB, 32 MB, 64 MB and 128 MB.

  Can I really don t give you answer correct but my friends a laptop with 512 MB RAM and it works fine.

  Good bye

• Memory address question

  I saw on the lenovo site, there is a Y510 (77582-FU link( ) equipped with original memory of 4 GB. This model will always be facing the same problem of memory, problem, while only 3 GB to 4 GB of memory can be really used?

  is it possible to solve the problem? AFAIK, the CPU uses socket M thus, according to this article, the problem could not be solved even by using a 64-bit operating system. Is this true?

  This problem is made by the method of addressing memory used in the Microsoft OS. It is not on a socket or a laptop - it's operating system itself. This problem cannot be solved.

  Vista SP1 x 32 can see 4 GB but it still works with / 3 gb.

  64-bit will allow you to see and to exploit the full 4 GB of RAM.

  You can install x 64 version, but it will not help much - the 64-bit applications eat more memory and your delivery of 1 GB memory will be wasted anyway. 64 bit OS is useful when you use more than 5 GB at least. 4 GB don't you will not benefit.

  Good thing of 2 x 2 GB is the real mode double channel, while 2 + 1 GB allows not just dual channel mode, it is not full.

  You can google for more information if you want.

• My data hard drive is about to die, or it is related to a memory problem?

  My windows 7 x 64 operational system joined as well as all my applications is installed in an ssd and there is a hard drive to store data. My system is as follows:

  Motherboard: GIGABYTE GA-X58A-UD3R

  MEMORY: KINGSTON KHX1600C9D3K3/12GX DDR3 12GB (3X4GB) PC12800 1600 MHZ HYPERX GENESIS TRIPLE CHANNEL KIT

  CPU: Intel Core i7 930 (s1366, 2.80 GHz)

  PSU: Enermax MODU87 + 700W 80 + gold PSU EMG700AWT

  HARD drive: Western Digital Caviar Black 1 TB HDD (64 MB of Cache, 7200 RPM, Sata III)

  SATAIII SSD : SSD Samsung 840 PRO Series 265 GB (model MZ-7PD256)

  I rarely have the problem which is depicted in the icons following (I speak for hard drive data storage):

  No preview of the photo, but I can see a specific image when I double click on it

  

  

  records are missing

  

  After this problem, I went to check if the same thing was happening in the icons in the primary system ssd. Therefore, I went to start--> pictures--> sample photos and I could see a glimpse of the images.

  

  I was also able to move through each folder I wanted in the ssd. Then I double clicked on 'computer' icon and the following happened.

  

  I was able to close the window without any problem. I think that it is a hard drive problem, but could also be a memory problem. What is your opinion on that? Another weird thing that happens, is the loading time on a cold start the msconfig.exe file. Sometimes the file loads instantly and other times it takes several seconds (7-10) to load on the screen. If it is not a cold start, then the file always loads instantly. The same thing happens also with the Task Scheduler. It seems very strange to me. Please note that Superfetch, Prefetch, Defrag, Windows backup and indexing are disabled.

  Finally, I found the solution to my problem. When I got a memory low message (12 GB of installed RAM memory) I couldn't believe my eyes.

  

  I immediately opened the resource monitor, went to the memory tab and I just saw the dllhost.exe file has consume all memory. I thought that this file was infected and I checked both versions of them (x 64 & x 86) with virustotal, but it wasn't the issue. When I read that this file system is loaded to restore media files in thumbnail view in windows Explorer, I remembered that I had a defective mp4 file that could not be opened. I knew I had to do. I had to delete this file. The problem is that while you try to remove a defective media file, the dllhost.exe file tries to make it, so you are not able to delete until the end of dllhost.exe through process Explorer process.

  Conclusion: When you see a media file that it is not rendered in the thumbnail, view then this file is probably defective and the dllhost.exe goes to an infinite loop, while he tries to make this file, until it consumes all your RAM memory!

• When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours Unite

  When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours uninstalling a bunch of useless software on my laptop and still photography will not merge the HDR sequence. It worked once before, but now it does not work. Help!

  I just 8 GB of RAM and have been able to put together five separate images HDR images. I compared these files 5-image HDR with files - 2 and 3-image and see improvement very few (if any) using all five. Your results may vary, but you can try to reduce the number of images until you get your new laptop.

• New PPr upgrade and memory problems now

  I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

  Thanks for you response Brian.

  Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

  Thank you

  Regalo

• Memory problem... Can someone help me please?

  I have Windows 7 64 bit with 8 GB of ram...
  I have installed SOA/BPM running the DEV version (IE is running with the ADMINISTRATOR of the server) and I begin to see the errors in the log...
  What I can shape to allow to WebLogic remain in place and be happy with memory, that he (the Task Manager shows 3g available)!
  
  < 26 August 2011 12:35:04 CEST > < critical > < health > < BEA-310003 > < free memory in the server is 4 867 280 bytes. There is danger of OutOfMemoryError>
  
  THANKS to YOU all!

  You can set your args memory in your [your path]/user_projects/domains/domain1/bin/setSOADomainEnv.sh

  That's what I put and I have no memory problems more. Other values (below) may be more appropriate for your machine. He recommended to do not to go higher.

  DEFAULT_MEM_ARGS = "- Xms2048m - Xmx2048m".
  PORT_MEM_ARGS = "- Xms2048m - Xmx2048m".

  Heidi.

• Droid wired headset problem/Question

  Hello

  Anyone else have a problem with the volume being really quiet or silent call on wired headset plugged on Droid?

  The 3.5 mm jack seems to work in music mode very well. I can hear MP3s sound level expected, however, when in call volume helmet falls to zero or almost zero level and cannot be increased. Other callers can hear me (the microphone works) but I do not hear their return or sound extremely tiny.

  I tried with two headphone 3.5 mm to 4 different drivers - iPhone and Blackberry - two I have this problem on appeal and at the same time, both are great for listening to music. I first noticed this problem after 2.0.1 OTA update 2.0 original. Recent update 2.1 has not solved this problem.

  I saw a big bunch of "similar sounding but NOT the same" problem/questions about integrated earpiece does not work once the headset is disconnected. I don't seem to have this problem. The problem I am describing applies to the volume wired headset for calls only.

  Thank you very much!

  If you get it replaced make sure you only change the SD card to the new.  Then, you won't lose any of these data.  You can save all your texts on the SD card with an application called SMS Backup & Restore.  The first time you open Market and tap Menu-> downloads it will show you all of your applications.  Paid and free.  If you leave this same screen so before installing all the they will disappear.  Write all your apps prior would be a good thing to do.  I hope this helps.

• JRun.exe memory problem

  I use Coldfusion 8 Developer Edition as a test server for the development of Web Dreamweaver sites. I am running Windows Vista Home Premium and 2 Gig of memory. When I start my computer I will meet some memory problems that I traced to jrun.exe that part of Coldfusion. For perhaps the first time jrun uses much more together half a million members. After that it drops to about 60 000 k. Does anyone know how to reduce?
  
  I am a user of medium level with no experience of server beyond establishing edition developer of CF admin using mostly default settings. I found bandages on this problem, but all were way over my head. All suggestions must be very precise and not in server admin jargon.

  I have not the slightest idea what a 'max heap' is or what "garbage collection" is, but I found the setting of the administrator. I reduced from 512 MB to 256 and it does not seem to affect the application to all, and it reduces the memory usage to the point where it does not affect other applications. Thank you.

• Toshiba A50-frequency of 106:FSB Bus and memory problem

  Hello
  I have a problem with my new Toshiba A50-106. There are Celeron M 1, 5 GHz inside. That all specifications for this processor FSB speed should be 4x100MHz and for my memory bus speed should be 2 x 133, but when I check in SiSoft Sandra 2004 I see 4x187MHz (748 MHz) FSB and the speed of the Bus of Mem 2x249MHz (4 98 MHz). I can't fix it myself, because there is no such option in the BIOS and there is no standard software from Toshiba.
  Consequence of this is the problem of the temperature of my cpu. It is on average 54 c in an idle state.
  Perhaps you have had the same problem or knows what is in him and you can help me.
  What is a temperature average of your Celeron M?

  Thank you in advance,
  Michael

  Hi michael,.

  to your first question, have you run Sandra 2004 in battery mode because in battery mode CPU manages to set the speed of the FSB and memory also bus speed!

  So, try once more on AC power mode and let me know the results.

  Also, you should check these results with different bechmarking systems because these programs work differently.

  @ temperature problem: there is problem o with 54 HP. The home page of intel, said a 125 C is the maximum and then the CPU stops automatically!

  Rudi Bye

• Compaq presario 5000us memory problem

  I am new to this post and try to help a child of 14 years to get his 1 pc. I realize that I shouldn't be wasteing my time with this machine, but he got it from someone and I said that I would be put in place. The problem is its supposed to support 768 total memory, I have 3 kingstons 128 meg, but there only see 128 and complains about 164 memory size error and error 201-memory 08000000B 3. I went into the bios (which well see MB 384) and saved the changes, but still no errors. I loaded xp and he sees also only 128 meg. Any suggestions?  Thanks in advance.

  Thanks for your reply, I solved the problem, believe it or not, he seems to have been little dust on the top of the dimm support, I cleaned it took it off and no more complaints. It wasn't inside the slot, he was on the top of the slot. Thanks again for your answers to my question.

• Satellite Pro A60 - memory problem?

  I have a machine at 3 years which became progressively slower, especially at the start. I installed original specification and use the installed MS Firewall and Antivirus it.

  Opportunities, with more than 1 window/application open, the screen freezes during use. On other occasions, I get an error message (something like) "Out of Memory Line 56", press OK and then displays the information.

  I wonder if an upgrade memory will solve these problems? Thank you

  Hmmm, you can simply test the memory using the freeware as Memtest86 +.

  > was wondering if an upgrade memory will solve these problems?

  Upgrade memory always improves the performance of laptops.
  But the question is whether this problem is related to the fault memory or to of memory performance.
  For me, it looks like a malfunction of memory.

  Try to remove a module, and check if the same error message using that one module of memory.

• Satellite L35 memory installation question

  I'm upgraded memory in my laptop of buddies, but for all intensive purposes, it will be here on out considered a mine.

  The toshiba satellite L35 originally supplied with 1 x 512 MB of RAM, 6 months, I have improved, putting 1x1gb stick in and keeping the 512 to so (it has worked well for all the time I got it). I decided to upgrade again and bought 1x2gb stick.

  When I put in, I put 2 GB key on the slot 0 (correct me if this is the wrong term for the slot in the bottom when the laptop upside down) and the stick of 1 GB in slot 1.
  When I started the computer should only 1.87 for the RAM, then it should be a little less than 3 years.
  I tried all the combinations involving the stick 2 GB
  2 GB to location 0, 1 GB in slot 1
  2 GB in location 1, 1 GB in slot 0
  2 GB at location 0, 512 MB at 1 location
  2 GB in slot 1, 512 MB at location 0

  For all this he appears as 1.87, no matter where the 2 GB is and what else is there with her.

  the 512 MB (original computer) is hynix 512 MB 2Rx16 PC2-4200
  the 1 GB (updated 6 months ago) is kingston KVR667D1S0/1 GR
  2 GB (brand new) is DDRII533 G.Skill PC2-4200 (F2-4200CL4S-2GBSQ)

  I am gets mixed responses from crucial.com and memoryx.net all this notebook can handle.
  So my question, I guess... I have to send the G.Skill back and get a different 2 GB? What is the compatibility issue?
  Should I get a kingston? Or I just do something wrong.

  Thank you guys and thanks for the forum in general, I looked here for instructions on how to install memory in a laptop, I've only done so far, desktop computers so I was puzzled and didn't break anything.

  Hello

  The L35 unknown for me. It seems to be a series of laptop designed for the American market.
  But the L30 is known to me and I know the L30 is very similar to the L35.

  However, the point is that the RAM can be upgraded only up to 2GB.
  This means that you can use a 1 GB module in a slot.
  A upper memory module size is not supported by the memory locations and therefore the laptop shows about 1.87 GB RAM.

  Hope this helps to explain the problem.

  Best regards