When I try to unzip a file I have by default Adobe Reader, which is the wrong program. I have Windows Vista Home Premium. I need to download a software to compress and decompress compressed files?

Similar Questions

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I have Windows Vista Home Premium and I lost my product key!

  I have Windows Vista Home Premium and I lost my case with the product key to this topic! I really need help! Can someone help me?

  If the operating system is running - use Belarc Advisor to retrieve the key. www.Belarc.com

  If the OS is always installed, but inaccessible, you can still be able to recover, depending on what is causing the problem - come back with details.

  If you have reformatted, about maybe possible get the key - but unlikely.

  If the HD is dead, or you have crushed the old installation, then you are out of luck.

• my computer acer have windows vista Home premium and I install Grand update pak2 and remained in safe mod can somebady help me

  my computer acer have windows vista Home premium and I install Grand pak2 and hestay update in safe mod somebady can help me

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• batch file to unzip the files in the 64 bit version of windows vista Home premium

  Hello

  I'm looking to write a batch file to decompress the files. I'm working on a windows vista Home premium 64-bit. any help will be really wonderful.thanx .pdp2907

  Please repost in the scripts Forum: http://social.technet.microsoft.com/Forums/en/ITCG/threads/ where script experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic) nothing happened.how can get video off camera and on the computer?

  (In the AutoPlay dialog box that appears when you turn on the DV camera, click importing video.)
  It's # 2 on how to import the video but when I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic), nothing is happening... How to get my video on my computer and my video cam?... I also got told by sony I needed to cap analog, so I have I need to download something on internet even thought I have Director on my windows? IM so confused?

  Hi harleykristi,

  Welcome to the Microsoft answers site!

  Looks like the video camera (Sony trv608) is not compatible with windows vista, see the Sony link below:

  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=1452&MDL=CCDTRV608

  () Vista drivers are not available)

  You try to install the software that came with the device in windows XP service pack 2 compatibility mode. See the link below:

  Run the program compatibility Wizard

  1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.

  2. follow the directions in the wizard.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  For more information, see the link below:

  http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=CCDTRV608&loc=3

  You the best solution would be to check with Sony to learn more.

  http://eSupport.Sony.com/us/Perl/contact-land.pl?MDL=CCDTRV608

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows Vista Home Premium and according to the sites (Microsoft), it is a FREE upgrade to Windows 7, is this correct and where do I go to find the Site to download free upgrade?

  Upgrade Vista to Windows 7

  There is no free upgrade available currently. There was a promotion, but it ended two years ago.

  I heard that if you buy Vista you get a copy of Windows 7 free
  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

• After a clean install of Windows Vista Home Premium, how long will it take to run updates and it will take a lot of bandwidth?

  updates after clean install of Vista Home premium

  I plan on upgrading the hard drive on my laptop two year old, which will require a clean install of Vista Home Edition full.  I live in a remote with the satellite internet service.  I would like to know in advance what will happen after the installation with the updates of the program.  I will ask you to install them? It would take a lot of bandwidth?

  Hi EllenCB,

  Welcome to Windows Vista community responses.

  Once you make a clean installation on your hard drive is erased. Now, when you install the operating system return updates that have been deleted will be delivered by Windows update to install on your computer. To save time and bandwidth, you can directly install Service pack 1 and Service pack 2 for Vista which would contain more updates. Of course when you run Windows update and when you try to download from the internet, your download speed will decrease. It is best to keep your system up to date which will allow your version of Windows to run better.

  Before installing the update, run the checksur tool, this tool is running an ad hoc analysis of inconsistencies that might prevent future maintenance operations. Download the tool from the link below.

  http://support.Microsoft.com/kb/947821/

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have windows vista Home premium, multimedia player and I want to play avi movies file, is there an update so that I can do?

  My daughter gave me a copy of a film, but it's an avi file (as it has windows 7), and my Media Player will not play the image it is his no picture. Do I need or there at - it something that I can download to fix the problem. Thank you.

  Is it a movie clip created with a digital camera?

  Did you record the clip on your desktop or in
  a folder on your hard drive?

  There is a small chance that the file would play if you
  Rename it to. AVI to. MI/GAL.

  It may be interesting to try to download and install the
  Freeware VLC Media player... He'll play about
  whatever it is.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Keep in mind, there are many types of AVI files.
  The following utility to identify the various .avi
  codecs:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  If it is a film of full length and you find that it is an Xvid file...
  You can download the Xvid codec from the following site:

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

• I have windows vista Home premium, but I don't have an installation cd and the custom of counting recover anything without the cd

  I don't know what to do, I can ask a Vista Edition installation cd Home premium of the company.

  I don't know wat to do.

  I want to install windows all over again but I don't have the disc, but I have the product key and much more,

  What should I do

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• . I have Windows Vista Home Premium. When I try to play a video file that is attached to my Windows Mail, playing audio but the video is not displayed on the screen.

  Because video (photo) is not shown there is no window to control me, IE; delete, stop. I have to wait until the audio stop. I can even click on another email and the audion continues until it stops on its own. Very frustrating.

  I've recently updated to IE9 and this problem started. I can see the other attachments, photos, etc., but must double-click on the icon of attachment (paperclip) displayed next to the email listed. Attachment icon does not appear with the body of the message. There is also a change from my old e-mail program used before you download IE9. I think I liked much better IE8!

  Hi JeanneChancellor,

  ·         What is the file format of the attachment?

  Method 1: Try saving the file to the computer and check for the issue.

  Method 2: Check if the update of Codecs can help with the issue.

  Codecs: Frequently asked questions

  See also:

  Solve problems with Windows Mail

• have windows vista Home premium need help to repair corrupted disk OS (C) files because I can create system retore point. Help, please!

  Hello, I own XPS 1530. I get a screen showing errors on the c drive, which can only be fixed after a restart, but they are not fixed no matter how many times I reboot. I did the command-line as administrator then SFC/scannow. at the end of the scan he says that some problems are not fixed. Theres be a way I can have these scanned/fixed disks at startup and avoid this nonsense altogether. Does anyone know how to fix this? I thank very you much for your time and help!

  I reinstalled windows by dvd. A dell technician got on my comp. Dell connect and helped me to reinstall windows. It's the only thing that worked.apparently, I got a bad installation to try to do a restore to factory before. Thank you for your response.

• I have Windows Vista Home Premium and whenever I save it fails. & System Restore does not work.

  Backup fails whenever I try to do, and system and Restore is not responding or the other.

  Hello

  do not post the same question more than once in these Forums

  what you're doing is confusing

  responded to your other Thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/can-i-do-back-up-and-System-Restore-my-PC-has/937c41ef-2f1a-4157-A2BD-f608fc6829b6

• I have Windows Vista Home Premium, I can upgrade to windows 7 when it becomes available on October 27 I just purchased laptop from Wal-Mart on October 21, but I don't have Internet to improve still

  Can you answer this question on the upgrade of Windows Vista Edition Family Premium in Windows 7

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

  Read the info here to see if you qualify.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to start boot corrupted files Windows Vista Home premium

  Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.

  Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go

  burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)